The hands free lift gate sensor on your 2017 Lincoln MKX will still work after installing the Curt Trailer Hitch Receiver # C78KR, but it will limit where your foot needs to be placed for the sensor to work.
You will want to place your foot on either side of the receiver, and move it in and out until the sensor recognizes your foot. After doing this a few times it will become second nature on where to place your foot for the sensor to work.
I included a video of the # C78KR being installed... view full answer...
The great thing about the Roadmaster base plate kit part # RM-524447-4 is that it fits all versions of the ecoboost, non-ecoboost, as well as the adaptive and non-adaptive cruise control models so either way it works for your 2016 Lincoln MKX.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms... view full answer...
The Thule WingBar Roof Rack, parts # TH711320, # TH710601and # TH46RV is a confirmed fit for your 2017 Lincoln MKX with flush mounted side rails.
I also recommend the Thule One-Key System Lock Cylinders, part # TH450400 in order to prevent theft. This will lock your rack and Thule One Key compatible accessories using a simple, single key system. view full answer...
The Yakima ReelDeal Rooftop Fishing Rod Carrier - Locking - 8 Fishing Poles # Y04089 can only clamp around crossbars so it won't be able to install in the T-slots of your rack. There is an option for a carrier that installs in the T-slots with the Rhino-Rack Fishing Rod Carrier - Locking - 8 Fishing Rods # RR574F. view full answer...
The first thing that we will want to look at for your 2013 Lincoln MKX is a base plate kit so that we can attach the tow bar to your Lincoln. I recommend using the Blue Ox Base Plate Kit # BX2625 because it is very easy to use, and when you are not towing your MKX you can remove the base plate tabs for a better look when driving it around.
The tow bar that I recommend for your setup is the Blue Ox Alpha # BX7380. This tow bar has a weight capacity of 6,500 lbs and includes the safety cables... view full answer...
We do!
I recommend going with the etrailer Trailer Hitch Receiver # e36RR for your 2017 Lincoln MKX because it has a matte black finish that looks better and blends in more with any black trim on your vehicle. This has a hidden crosstube so only the receiver will be seen as you can see in the linked video and photo on a 2017 Ford Edge.
If you let me know what you plan on using the trailer hitch for I'd be more than happy to make some additional recommendations for you! view full answer...
The Thule Passage 3 Bike Carrier # TH911XT has been determined to fit the 2011 Lincoln MKX. I have attached a review video of this bike rack for you.
If you plan on carrying any women's or alternative framed bikes you may want to check out a bike adapter bar, like the Thule Bike Adapter Bar # TH982XT to provide a horizontal top tube on your bikes for an easier attachment point. This will also allow the bikes to be carried more level and will provide greater ground clearance. I have attached... view full answer...
Yes, the Blue Ox Patriot Supplemental Braking System BLU37TR will work on your 2016 Lincoln MKX. In addition to a supplemental braking system, there are a few more parts you will need in order to flat tow your 2016 Lincoln MKX.
- Base Plate Kit: Roadmaster Crossbar-Style Base Plate Kit # RM-524447-4: These will give your MKX a clean look when the tabs are not installed, as you can see by the accompanying photo, which is a cut out of the linked install video of these base plates on a 2016... view full answer...
All you need for your 2018 Lincoln MKX is the Yakima JetStream Crossbars # Y00425, RidgeLine Towers # Y00145 and RidgeClip Fit Kit # Y89FR. This is an aluminum colored crossbar and will fit your Lincoln with siderails. view full answer...
The only trailer hitch receivers we have for your 2017 Lincoln MKX hang down below the bumper like the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75234 and the Curt Trailer Hitch Receiver part # C78KR. While we do not offer a hitch that exits through the bumper like you requested, the main cross tubes will be completely hidden behind the bumper, and will measure approximately 12 inches from the ground to the top inside edge of the receiver tube, which isn't all that bad.
That being... view full answer...
Baseplate installs typically take the better part of a day to complete as you're typically pulling the entire fascia/bumper off and most of the time doing quite a bit of drilling or trimming to get a baseplate like the # BX2673 installed. We typically schedule a full day for baseplates because things don't always want to run smoothly.
Your motorhome should have a 7-way on the back of it, if not then you'll need part # ETBC7 and some additional wire # 10-2-1 to run up to the front of the... view full answer...
It is absolutely possible to install a trailer hitch on your 2006 K-Z Escalade trailer; it will only require that your trailer have a box frame, C-channel frame, or I-beam frame that is between 22 inches and 72 inches wide.
Should your trailer have that you will be able to use the Adjustable Width Trailer Hitch Receiver for RVs # 13703 which will can either bolt or weld onto your trailer's frame. This is a Class III hitch with a 2 inch receiver but please keep in mind it will require the... view full answer...
TheFlint Hill Goods Square LED Brake Light Hitch Cover for 2" Hitches # FHG72VR is made to bit a 2" shank. If you want to use it in the 1-1/4 inch hitch on your 2010 Lincoln MKX, you could use the Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver # HT02.
Your vehicle will need to be equipped with a 4-Way plug in order for the lights on the hitch cover to function. We offer a custom-fit wiring harness, part # 118551, for your vehicle if needed. view full answer...
The Hayes Air Brake Control, # HA100400C, will work with the air brakes on your Alfa motor home and trailers with electric brakes, but not the 2008 Lincoln MKX (which would require a different type of braking system like the Roadmaster Even Brake Portable Proportional Braking System, # RM-9400).
On the Air Utility Brake Control, in addition to connecting to the air brake system, there are also 3 wires that will need to be connected. The black wire provides power to the unit, the blue... view full answer...
The Blue Ox base plate kit, part # BX2673 is a fit for a 2016 Lincoln MKX with or without the EcoBoost engine.
If you use the Roadmaster to Blue Ox Base Plate Adapter, part # RM-031, you could indeed use your Falcon 2 tow bar with the Blue Ox # BX2673 base plates.
If you don't already have them, you'll also need safety cables like # RM-643, a lighting solution like the Roadmaster Magnetic Mount Towing Lights, part # RM-2120 and a supplemental braking system like the Stay-IN-Play DUO #... view full answer...
The Replacement Master Cylinder w/ Bypass Electric Lockout for Demco Actuators - Disc Brakes # DM5918 is for disc brakes only. You will not be able to use this with your Demco actuator for drum brakes.
Instead, you need the Replacement Master Cylinder w/ Inline Solenoid for Demco Actuators - Drum Brakes # DM5921. This works with DA66B, DA86, DA91, DA10, DA16, and DA20 models designed for drum brakes. view full answer...
No, the Thule Snug Tite lock # THSTL2 is not a confirmed fit for the Yakima Kingpin bike rack but you can use the Yakima lock # Y07235. This lock fits the threaded pin that came with the Kingpin bike rack. I have linked a video review of this lock for you. view full answer...
I'm happy to inform you that the Curt Hitch, part # C78KR, does indeed fit with your 2018 Lincoln MKX. This hitch is custom designed for the MKX line and features a simple installation process. It's a Class III hitch and can handle up to 4500 pounds of gross trailer weight and 675 pounds of tongue weight, so you will be able to haul a variety of accessories.
If you're looking to use a trailer with this hitch, then I recommend the T-One Vehicle Wiring Harness, part # 118682, for wiring.... view full answer...
In order for you to install any of the Yakima SkyRise HD Tent for Roof Rack Crossbars, two person, part # Y07436, or three person, part # Y07437, on your 2017 Lincoln MKX it will need raised rails or rooftop tracks. I double checked the SkyRise Best Practices on Yakima's website and you will not be able to use either of these tents on your 2017 Lincoln MKX if it has a naked roof.
Most rooftop tents have restrictions that will not allow them to be installed on aftermarket roof racks installed... view full answer...
We get asked this question pretty regularly and the answer is you must run the hot lead to the battery when installing a 4-way, in your case the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118551 for a 2007 Lincoln MKX.
The reason is this is the only way to ensure your car's wiring is not otherwise affected. You can run the hot lead from your battery in any manner you see fit, you are only limited by how much you are willing to create holes to run the wiring.
I have... view full answer...
Go To Results