bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Hyundai Kona


  • Low Profile Roof Rack For 2019 Hyundai Kona With Flush Rails
  • This Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 is definitely going to be your best option. The RCL Legs # RRRCL4 mount to your fixed points on your 2019 Hyundai Kona. You'll want to get the Rear Wedges # RRSUB0671 and the Custom RCP Fit Kit # RR66QJ. These are only going to sit up a couple inches from your roof rails and will work great with your roof top tent # TH8001KSK04. I've included a video of an installation to help you with the install!
    view full answer...

  • Draw-Tite Trailer Hitch Receivers Confirmed to Fit a 2023 Hyundai Kona Electric
  • Yes, per Draw-Tite their Max-Frame Trailer Hitch Receiver # DT52GR will fit your 2023 Hyundai Kona SE electric. The 2" receiver will allow for a larger selection of hitch mounted accessories.
    view full answer...

  • Folding the Thule EasyFold XT Bike Rack for 2 Electric Bikes TH903202
  • The Thule EasyFold XT Bike Rack for 2 Electric Bikes, # TH903202 folds upright from the sides. See the attached images. It will also tilt out from the vehicle to assist with easier access to the trunk or SUV cargo area. Please note the linked product review video showing operation of the Thule EasyFold XT Bike Rack.
    view full answer...

  • Does Curt Hitch Require Stabilizer Strap for 2019 Hyundai Kona
  • Yes it still holds true (as of 7/2023) that you need to use the Curt Cam Buckle Stabilizing Strap for Hitch # 18050 when carrying any non-trailer loads or loads not supported by tires like bike racks and cargo carriers with Curt Trailer Hitch Receiver # C11529. The Draw-Tite Max-Fram Trailer Hitch Receiver # DT52GR does not require any additional straps or support and it has the more desireable 2" hitch opening. It also has a 100 lb more tongue weight capacity than the hurt. I would...
    view full answer...

  • Roof Rack and Cargo Box Recommendation for 2019 Hyundai Kona w/ Flush Mounted Rails
  • Sometimes cars won't ever have a trailer hitch available so assuming you are looking to carry bikes or cargo on a 2019 Hyundai Kona EV you can still do so with a roof rack. So long as your '19 Kona EV has flush-mounted rails that run front to back (as opposed to a naked roof with no rails at all on top) the best option is from Rhino-Rack: - Rhino-Rack RVP Roof Rack for Fixed Mounting Points # RR23QJ To carry cargo atop your Kona you can use a rooftop cargo box and a great option is the...
    view full answer...

  • Trailer Wiring Harness Recommended for 2022 Hyundai Kona
  • Although we don't offer a plug and play trailer wiring harness for the 2022 Hyundai Kona, we do offer a universal fit option that would provide you with a 4-pole trailer wiring harness. You'll need to use the # C59236 which is hardwired into the existing taillight wiring circuits. The kit includes a circuit tester which will help you determine which wire carries which function.
    view full answer...

  • Recommended 2 Bike Carrier for 2 Hitch on 2019 Hyundai Kona
  • We've got a lot of really great bike racks available that will work on the Draw-Tite # DT52GR you're installing on your 2019 Hyundai Kona, but I recommend going with the Hollywood Racks Trail Rider Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount # HR200Z. The Trail Rider will fit great on the hitch # DT52GR and I really like that it comes with a locking hitch pin and locks on the ratcheting arms for security. I've linked a short review video of this rack for you to check out,...
    view full answer...

  • Recommended Trailer Hitch for a 2018 Hyundai Kona
  • I spoke to my contact at Draw-Tite and they informed me that the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - 2" # DT52GR will fit your 2018 Hyundai Kona. This hitch is a custom fit that installs using pre-drilled holes in the frame. Once you have the trailer hitch installed you will then measure from the center of the hitch pin hole to the outer edge of the bumper. This measurement will be needed to help select the best bike rack for you.
    view full answer...

  • Thule Hitching Post Pro Bike Rack And Thule Camber 2 Bike Rack Comparison
  • The Thule Hitching Post Bike Rack - 1-1/4" and 2" Hitches - Tilting Item # TH934XTR and Thule Camber 2 Bike Rack - 1-1/4" and 2" Hitches - Tilting - Steel Item # TH9058 are fundamentally the same. The only differences are aesthetics and very slight measurement differences and the Hitching Post Pro can carry 4 bikes. The bolt will thread into the receiver and will need to be checked occasionally for tightness. The Replacement Hex Bolt 1/2" x 3-1/4" for Thule Hanging Bike Racks - Qty 1...
    view full answer...

  • Recommended Hitch with 1-1/4" Receiver for 2020 Hyundai Kona
  • Yes. The Curt # C11529 is a confirmed fit on the 2020 Hyundai Kona, including AWD versions. This Curt hitch has a 1-1/4" hitch receiver so it will be perfect for your current bike carrier with a 1-1/4" shank. I've also linked the instructions for installation of this hitch so you can get an idea of what it entails.
    view full answer...

  • Can Curt Hitch for 2022 Hyundai Kona be with Hitch Adapter
  • For your 2022 Hyundai Kona electric the Draw Tite hitch part # C87DR is a confirmed fit. There is some light trimming of the lower fascia that needs to be trimmed to install this. You can use a hitch adapter like the part # HTAD which this hitch to go from the 1-1/4 inch hitch size to the 2 inch hitch size but when you do this you end up cutting the capacity of the hitch by 50 percent. So a better option would be a bike rack that fits both hitch sizes like the Kuat Transfer part # KU74FR.
    view full answer...

  • Trailer Hitch That Fits 2020 Hyundai Kona
  • Yes the Draw Tite hitch part # DT52GR is a confirmed fit for your 2020 Hyundai Kona.
    view full answer...

  • What Trailer Hitch Fits a 2022 Hyundai Kona
  • For your application I recommend going with the Curt Trailer Hitch Receiver # C11529. Attached is a photo of this hitch installed on a 2020 Hyundai Kona, as well as an installation video and the installation instructions for you to check out as well. When using this hitch for a bike rack, like the Thule Apex XT # TH9024XT, it's important to note that Curt says to use a stabilizer strap like part # 18050 to help minimize the movement of the rack during travel.
    view full answer...

  • Will the Rhino-Rack RVP Roof Rack Fit on My 2019 Hyundai Kona with Flush Rails?
  • Yes, the Rhino-Rack RVP Roof Rack for Fixed Mounting Points - Vortex Aero Crossbars - Aluminum - Qty 2 # RR23QJ will fit your 2019 Hyundai Kona with flush mounted rails. The installation is not too difficult because the all of the hardware is included in the kit required for installation on your rails.
    view full answer...

  • Best Way to Carry Kayaks with a 2019 Hyundai Kona
  • I took a look at the online owner's manual for your 2019 Hyundai Kona and you are correct that they do not recommend towing a trailer with this vehicle, even if it is the EV model. Although the word "recommend" hints that you still can, I wouldn't do so as Hyundai has tested the limits of the vehicle and they don't think it is wise to tow a trailer. We actually do have another option for you to carry some kayaks with a roof rack. I recommend using the Thule AeroBlade roof rack to do so....
    view full answer...

  • Hitch Size Available for 2022 Hyundai Kona N Line
  • For lighter duty vehicles like the 2022 Hyunda Kona N-Line there are only 1-1/4 inch hitches available like the Curt part # C87DR. The larger 2-inch hitch size is generally only available for heavier duty vehicles like trucks and SUVs.
    view full answer...

  • How to Keep Safety Chains from Dragging
  • Safety chains dragging is a common issue and concern and we do offer a solution for this problem. You will want the Quick Links - 7/16" Diameter - Qty 2 item # C82931 to shorten your chains so they don't drag the ground. You want to make sure you don't shorten them too much and restrict your turning capacity. I can not give you a more accurate answer because there are so many variables. How long your chains are, how far back your chain hangers are, the elevation change you will be going...
    view full answer...

  • Is There a Trailer Hitch Available for the 2020 Hyundai Kona EV
  • It sounds like you're referring to the trailer hitches that are a confirmed fit on the 2020 Hyundai Kona and not the Kona EV, like the Curt # C11529. It's not so much about damaging the vehicle as it is that there are differences between the two models that make the hitches not fit on the EV models as it's my understanding that there are differences in the frames of the two vehicles that make the hitch for the regular models incompatible with the EV. As of right now there are currently...
    view full answer...

  • Recommended Aluminium 15 Inch Star Mag Wheel with 6 Bolt Pattern
  • Yes, that is the Aluminum Hi-Spec Series 04 Star Mag Trailer Wheel part # AM20516. For a center cap, the Lionshead Trailer Wheel Center Cap w/ Snap-In Plug part # LHCS108-SI60C is a direct fit. Don't forget the Americana Metal, Bolt-In Valve Stem part # AM20906.
    view full answer...

  • Does the Trailer Hitch for a 2020 Hyundai Kona Require Any Cutting or Drilling
  • The Curt Trailer Hitch Receiver part # C11529 which fits the 2020 Hyundai Kona will not require any permanent modifications to the vehicle so you can revert the vehicle completely back to stock once your lease ends without having to worry about any charges for damage. The Curt hitch is a 100% bolt-on fit with no cutting or drilling required. I recommend the Curt hitch as they just tend to fit a bit better in my experience but either option is a good choice that will work well. If you don't...
    view full answer...