Expert Answers about Isuzu

• Camper with Weak Marker/Running Lights on Right Side
• Your best bet would be to trace the running light circuit from the trailer connector all the way back to the lamps. You will want to pay careful attention to the point where the running light circuit for the right side of the trailer splits off from the circuit for the left side. Since the lights on the left side are operating fine, the problem most likely exists in the portion of the circuit after it splits off to power the right-side marker lights. Check for pinched wires or cracked or...
  view full answer...


• Will The Curt Trailer Hitch Receiver C13098 Fit a 1991 Isuzu Trooper?
• The Curt Trailer Hitch Receiver # C13098 is designed to fit a frame 40-7/8" wide. This is the receiver confirmed to fit the 1992-2002 Isuzu Trooper. For your 1991 Isuzu Trooper the Curt Trailer Hitch Receiver # C12181 is the only receiver we have confirmed to fit.
  view full answer...


• Trailer Wiring Solution for 2011 Isuzu NPR
• While we don't have any custom fit trailer wiring harnesses that fit the 2011 Isuzu NPR we can still help with a universal fit option like the # C56175 which you'd have to wire to the taillight circuits of your NPR.
  view full answer...


• Tow Ready Custom Fit Wiring Recommendation for a 1999 Isuzu Amigo
• This Tow Ready Custom Fit Vehicle Wiring, # 118360, would be the correct wiring kit for your 1999 Isuzu Amigo. Most likely the 5x8 utility trailer that you are renting will have a 4-way connector that will plug right into the 4-way trailer connector from the # 118360. I attached installation instructions for this product for you to check out also. You may also be interested in the following products to complete your tow setup: Curt Trailer Hitch # C13235 Class II Drawbar # 36053 Hitch...
  view full answer...


• Recommended Lug Wrench for 1993 Isuzu Rodeo Spare Tire
• From what I can find online the wheel bolt is a M12-1.5 inches long. The lug nut wrench needed is 21mm. We have one lug wrench to work well with your application. I recommend the Powerbuilt Billy Club Lug Wrench # ALL642250 which will come with the 21mm socket.
  view full answer...


• Parts Needed To Add 7-Way Connector To 1990 Izusu NPR Truck
• Absolutely! To install a 7-way connector on your 1990 Isuzu NPR you will first need to install a 4-way connector. Since there is not a custom 4-way connector harness you will need to use the Upgraded Modulite Vehicle Wiring Harness Kit # C59236 which includes a circuit tester to verify the functions of your factory wiring to make sure you make the correct connections. The 4-way connector will wire as follows: White wire to the vehicles frame Red wire to brake light Green wire to passenger...
  view full answer...


• Parts Needed to Install a Brake Controller in a 1999 Isuzu NPR with 7-Way
• Since you have a 7-Way you will only need a few more components to complete a brake controller install on your vehicle. First let's start with a brake controller. I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. Next, for a wiring kit to install the brake controller and the 7-way adapter you would want the Wiring Kit for 2 and 4 Brake Electric Brake Controllers # 5506. This...
  view full answer...


• How Do Brakes Get Power With a 4-Way to 7-Way Adapter
• It sounds like you have a 4-way connection on your vehicle and added a 7-way adapter like the Curt Trailer Connector Adapter # C57672. Plugging your 4-way into this adapter will only give you the same functionality you had before, powering your trailer's signal lights. In order to get power to your brakes and be able to use your brake controller, you will need to run some additional wiring. What you need is the Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers # 5506....
  view full answer...


• Surco Safari Rack 5.0 Rooftop Cargo Basket Recommendation for 1989 Isuzu Trooper with Side Rails
• We have the Surco Safari Rack 5.0 Rooftop Cargo Basket for Factory Rails # SPS4550-1101 which is designed to fit on factory raised roof side rails like it sounds like you have on your 1989 Isuzu Trooper. The hardware that comes with this is designed to clamp around the raised side rails of a roof rack like you have for installation.
  view full answer...


• Hitch, Bike Rack, and Cargo Carrier Solution for 1999 Isuzu Oasis
• There are only 1-1/4 inch hitches available for your 1999 Isuzu Oasis. 2 inch hitches are reserved for higher capacity vehicles like trucks and SUVs. There are bike racks and cargo carriers that fit the smaller hitch size though. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys to name their favorite, most easy-to-use bike racks and this one showed up in nearly everyone's top three....
  view full answer...


• Does Curt Hitch # C13235 Fit 2001 Isuzu Rodeo Sport
• Yes, the Curt hitch part # C13235 that you referenced does fit your 2001 Isuzu Rodeo Sport.
  view full answer...


• Is There a Trailer Hitch Receiver Which Will Fit a 2018 Isuzu NPR With A Lift Gate?
• In my experience a truck like your 2018 Isuzu NPR will either have a lift gate or a receiver. This is because the lift gate has to go up and down on the frame and is typically folded where the receiver will sit. Depending on how everything is mounted and the length of your chassis you may be able to still use a receiver like the Curt # C59CR with an Extension # C45048. You would have to mount the receiver in front of the lift gate and then insert and remove the extension when needed.
  view full answer...


• Compatible Hitch for 2001 Isuzu Rodeo Sport Amigo
• The Curt # C13222 is not a fit for the 2001 Isuzu Rodeo Sport. We currently do not have a hitch that fits your vehicle. If you want to carry bikes or cargo, you could add the SeaSucker Monkey Bars Roof Rack - Round Bars - Vacuum Cup Mount - 48" Long # 298-SX6000B which is a confirmed fit for your Rodeo Sport. If you let me know your intentions, I can help you choose products to get it done.
  view full answer...


• 4-Way Trailer Wiring Harness Recommendation For 2001 Isuzu Rodeo
• It sounds like you are looking for a 4-way trailer wiring harness for your Rodeo. We have just what you need. I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part # 118360. This is an easy installation by attaching the T-connectors to the connectors that are behind the tail lights and you are good to go. I have attached a link to an installation video for this harness on a 2001 Rodeo you can check out. When working with electrical connectors I recommend...
  view full answer...


• Trailer Hitch Recommendation for a 2002 Isuzu Rodeo
• The Draw-Tite Hitch # 75093 that you referenced would work well on your 2002 Isuzu Rodeo as long as it has an under vehicle wheel spare. If you have a door mounted spare you would want a Curt Hitch # C13235. You should check your owners manual for the towing capacities of your vehicle and make sure not to exceed them. When determining the overall towing capacity of a setup you should always go with the lowest rated component in your setup as the overall towing capacity. I attached installation...
  view full answer...


• Suspension Enhancement that Fits 2015 Isuzu N Series Freezer Truck
• While we have suspension enhancement that fits your 2015 Isuzu N-Series Freezer Truck like the SuperSprings part # SSA39 nothing we offer can officially increase the towing capacity of your truck. The # SSA39 can give you and additional 3,300 lbs of suspension support but since a vehicle's towing capacity is more than just the leaf spring capacity it doesn't increase the overall capacity of the truck.
  view full answer...


• Hitch and Bike Rack Recommendation for a 2000 Isuzu Rodeo
• Since you are looking for the most stable option for transporting your 2 Diamondback bikes with your 2000 Isuzu Rodeo and because of your vehicle spoiler your best option would be to install a hitch like the Curt Trailer Hitch part # C13222 and then use a hitch mounted bike rack. I attached an install video for this hitch. The most popular 2 bike rack we carry is the Swagman XTC-2 Bike rack part # S64670. This is a great platform rack with many great features that won't break the bank....
  view full answer...


• Trailer Hitch Receiver Compatible With a 2014 Isuzu NPR
• The Draw-Tite Universal with the 7" Tall Brackets # 41990-07 or 16" Tall Brackets # 41990-16 are some of the better options for your 2014 Isuzu NPR. The height brackets you will need will depend on what kind of up-fit your vehicle had done to it. The brackets themselves can be either bolted or welded to the frame on your truck which allows you to position it where it will fit best and work with any lifts or bumpers you already have.
  view full answer...


• Will The Draw-Tite Hitch Cargo Carrier # 6502 Clear The Rear Swing Door On My 2004 Isuzu Rodeo
• I walked out to our warehouse and assembled the Draw-Tite Hitch Cargo Carrier, part # 6502. From the top of the shank to the top edge of the carrier I measured 6-5/8 inches when the carrier is not folded up. Yes, you will be able to open the rear door on your 2004 Isuzu Rodeo when the Draw-Tite Cargo Carrier is attached. Part # 6502 comes with a hitch pin to secure to your hitch, for added security we have the Trailer Hitch Receiver Lock, part # e98880. I have linked a picture I took...
  view full answer...


• Determining If Buyers Products Flat Bed Hitch Plate 3371809055 Will Fit Vehicle W/ Tommy Lift
• The Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper with 2" Receiver # 3371809055 you were looking at measures 34-1/2" between the sides of the hitch which you can see in the included diagram. This hitch may fit with your Tommy Lift, but you will need to compare the measurements shown in the diagram to your vehicle with the Timmy Lift to see if you will have enough clearance. I included a video of the # 3371809055 for you to take a look at.
  view full answer...