Curt 2-inch Class III hitch # C13119 and 4-pole wiring harness # C56158 are both confirmed fits for your 2014 Honda CRV. For a mounting bracket for your 4-pole trailer connector you can use part # C58001, Curt's Easy Mount Bracket for 2-inch hitches. This bracket mounts to the hitch so you do NOT have to drill holes into your bumper.
Please note some customers do prefer NOT using an exterior mounting bracket. By keeping the connector inside the vehicle's rear cargo area when not needed,... view full answer...
We have exactly what you will need to resolve the brake and signal light issues you are experiencing when towing your 2012 Honda CR-V.
You will just need to install the Roadmaster Brake-Lite Relay Kit # RM-88400. This is needed on your vehicle to keep the CR-V's brake signal from overriding the turn signal sent by the RV. This will not interfere with your vehicle's electrical system and will automatically activate when the RV running lights are turned on.
I have attached an installation... view full answer...
For the hardware used to install trailer hitches on your 2013 Honda CR-V it will depend on the hitch. Draw-Tite Class III hitch # 75742 and Class II hitch # 36520 use Hex Bolt M10X1.25X30 CL8.8 and a 3/8-16 U-Bolt.
Curt trailer hitch # C11555 uses 1/2-13 x 2-1/2 LG and 2-7/16-14 x 1-1/2 carriage bolts along with matching block spacers.
Curt hitch # C13119 uses a 7/16 - 14 x 1.75" x 1.00" C-C u-bolt and M10 - 1.25 x 30 hex bolts.
If you have one of these hitches but not the hardware you... view full answer...
We do offer a mostly concealed option for the 2013 Honda CR-V, the EcoHitch # 306-X7297. The installation is pretty involved, it would involve temporarily removing the rear bumper cover and underbody panel. The underbody panel will need to be notched to allow the receiver tube to pass through it.
Once installed, the only visible portion of the hitch would be the receiver tube and the safety chain loops. The remainder of the hitch will be concealed behind the bumper.
EcoHitch estimates... view full answer...
The price, assembly steps, and part numbers. I checked with Rhino-Rack and the ROC25 Roof Rack for Naked Roofs item # RR45GR is a newer part number and kit. It comes with the legs attached to the crossbars instead of leaving this step for you to complete. It's replacing the older RS 2500 Roof Rack item # RRRS409B. Both are confirmed to fit a 2015 Honda CR-V with a naked roof. They each have a 165 lbs capacity.
I have linked installation videos for both below. view full answer...
The best trailer hitch for your 2018 Honda CR-V Touring with the hands-free tailgate is the Curt, part # C13397. I prefer the Curt over the Draw-Tite hitch, part # 76128, because the Curt's crossbeam is completely hidden behind the vehicle's bumper. All you see when it's installed is the receiver opening and the safety chain loops. The installation is a little more in depth, but in the long run I think it's worth it.
No matter which hitch you choose in order to maintain your hands-free... view full answer...
Out of the Yakima and Thule options for the naked roof on your 2006 Honda CR-V I recommend going with Yakima. The Thule options have bars that end inside the foot packs. This gives the roof rack a great OEM look but minimizes the amount of crossbar space that can be used.
To use a JetStream aero bar roof rack on your CR-V you will need the JetStream bars, part # Y00425, along with the SkyLine Towers # Y53TR, and the Landing Pad 8 # Y00228. If you would like to add locks to this roof rack... view full answer...
The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56370 is a confirmed fit for both the FWD and the AWD 2017-2018 model years of the Honda CR-V. view full answer...
We have the Rhino Rack Roof Rack part # RRVA126B-2, # RRRCL4, # RRRCP60-BK that's a confirmed fit for the flush rails of your 2022 Honda CR-V and is also compatible with the Thule Hullavator part # TH898. I really like the Rhino Racks as you get a higher quality roof rack at a better price. view full answer...
So the main power wire of the # 292-101079 is the yellow and would connect to the old power wire you have found. The accessory circuit would run to a keyed power source to turn the stereo on when the key of the vehicle is turned on. The antenna circuit would get left off if you don't have a power antenna. view full answer...
We do have a hitch that will fit your vehicle but the Curt # C13397 is not a confirmed fit for your 2021 Honda CR-V Touring Hybrid
The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" # 306-X7345 is the only option compatible with the Touring trim. It has a maximum tongue weight of 525 lbs and gross trailer weight of 3,500 lbs just like the Curt. It also has a concealed cross tube which helps provide a factory look.
If you plan on doing some towing, I recommend the... view full answer...
By "hatchback rack" I believe you are referring to a trunk-mounted bike rack and we do indeed have a trunk rack that fits your 2018 Honda CR-V Touring, from Saris:
- Saris Bones 2-Bike Rack # SA805BL
This will also require the use of the Saris Hatch Huggers # SAR88MR to replace the hooks on top of the rack for installation on your '18 CR-V.
The only other thing to keep in mind is that with a hanging rack like this one, if one of the bikes you want to carry has a step-through frame,... view full answer...
The Thule Force XT L Rooftop Cargo Box # TH6357B is 18 inches tall, and I'm not sure how to answer if that means high-profile or low-profile. For your second question, I am unable to clarify somebody else's reasonings. Then for the final question, the weight of the # TH6357B cargo box absolutely counts towards the roof and/or roof rack capacity. view full answer...
Check the condition of the connection made by the connectors of the Hopkins # HM56300. It sounds like they aren't fully seated which would prevent the CR-V taillight signals from getting to the taillights. view full answer...
Between the base plates that fit your 2011 Honda CR-V, the Blue Ox Base Plate Kit # BX2246 and Roadmaster Direct-Connect Base Plate Kit # RM-521559-5, I recommend the Roadmaster as it will be the slightly easier installation.
The reason for that is the Roadmaster does not require having to saw off part of the bumper core in order to install the base plates, which the Blue Ox does require. That is the major difference between the two installs so if it were my 2011 Honda CR-V I would definitely... view full answer...
We had a customer come back and state that the Draw Tite Hitch part # 36597 fit and worked well on their 2017 Honda CR-V Touring so we know it would be a great choice. You will most likely just have to kick to either side of the hitch opening to get the lift gate to open.
Everything needed to install the hitch is included as well. view full answer...
The Yakima StickUp, # Y02420, is stuck being a 2-bike rack. There is no add-on that will allow you to carry 4 bikes. Since you need to carry 4 bikes you have some options. You can go with a full time 4-bike rack or you can go with a 2-bike rack that does have an add-on feature that will allow you to carry 2 bikes when needed.
I will give you the best options for each of these racks based on similar functionality and other characteristics displayed by the StickUp.
For a strictly 4-bike... view full answer...
Curt offers a 2-inch Class III trailer hitch receiver for the 2014 Honda CR-V, part # C13119, which is one of several options available for your car. This 2-inch hitch is rated for 350-lbs tongue weight and 3,500-lbs gross trailer weight.
Please note that Curt requires use of a stabilizing strap for all non-trailer loads, such as bike and cargo carriers. Their strap # 18050 is an ideal solution. This simple and inexpensive cam-buckle support strap will help to stabilize any accessory... view full answer...
When we installed the Curt T-Connector Wiring harness # C56370 in a 2021 Honda CR-V like yours we found that reinstalling the weather stripping around the hatch was pretty easy and straightforward. Since the vehicle is still new the weather-stripping is still nice and pliable making it easy to reinstall.
I included a link to the video where we installed the # C56370 on a 2021 Honda CR-V for you to take a look at. view full answer...
The Saris Bones trunk rack part # SA805BL is a confirmed fit for your 2015 Honda CR-V. Due to the way it installs though you would not be able to use the rear wiper at all. You also need the # SA3035 to replace the lower hooks, or you can place the lower hooks inside the trunk.
If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Kuat Bike Frame Adapter Bar # UB01 to provide a horizontal top tube on your... view full answer...
Go To Results