If you exceed the weight capacity of the Kuat Transfer bike rack part # KU84FR that you referenced it is very likely you will damage the bike rack so we cannot safely recommend you do so. You'd need to go with an e-bike rack with higher weight capacities like the Thule EasyFold XT part # TH903202 which is very easy to use and comes with a ramp to make loading and unloading bikes easier as well.
I attached a review video for more info on this as well. view full answer...
Yes, it will. The etrailer Hitch item # e98848 will fit the hybrid model 2022 Honda CR-V EXL. This hitch is custom fit and bolts to your Honda with included hardware. This is a class III hitch with a 2" receiver.
I have linked an installation video below.
If you are planning on towing you will also need a wiring harness item # C56370 for an all wheel drive model or item # 118741 for a front wheel drive model and a ball mount kit item # C45534. view full answer...
Thanks for the picture! That is definitely not the connector you are looking for. I have attached a picture below that will show you exactly where to look to find the connector. You are indeed looking for a white connector, but with a red tip. I have also linked an installation video below. If you skip ahead to the 1:55 mark you'll see our installer pull it out from behind the driver's side D pillar.
The Curt T-Connector Vehicle Wiring Harness item # C56370 fits the all wheel drive models... view full answer...
I checked with Draw-Tite, and I can confirm that the Draw-Tite Trailer Hitch item # DT79MR does fit the 2023 Honda CR-V Sport Hybrid.
If you are planning on towing you will also need a wiring harness item # C59236 for the front wheel drive models or item # C56370 for the all wheel drive and a ball mount kit item # C45534.
I also recommend using the No-Drill Mount Bracket item # 18136 and the item # C42CR to secure the 4-way connector to your hitch. This will put it in an easy to reach... view full answer...
The correct hitch for your 2022 Honda CR-V is the etrailer hitch item # e98848. This hitch is custom fit and bolts to your Honda with included hardware. It also fits the 2021 model.
The etrailer hitch item # e98848 is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity, and a 525 lbs maximum tongue weight. The hitch is made in the USA and weighs 30 lbs.
I have linked an installation video along with a couple of pictures so you can see what this hitch looks like when... view full answer...
The holes themselves on the Bulldog BX1 Gooseneck Coupler Inner Tube # BD1289210300 are 0.86 inches in diameter. The bolt or pin is a 3/4 inch. view full answer...
The etrailer.com Trailer Hitch # E98848 weighs 30 lbs; this 2 inch hitch is a fit for certain model year Honda CR-Vs and has a towing capacity of 3,500 lbs with a tongue weight capacity of 350 lbs though make sure to always check your owner's manual to find out the capacity of your CR-V.
I have added a photo which shows how this hitch looks when installed on a CR-V so you can get an idea of how this will look when on your Honda.
I also recommend checking out Ball Mount Kit # 989900,... view full answer...
Per Thule, the Thule Roof Rack - 2018 Honda CR-V has a weight limit of 165lbs for your vehicle. This rack consists of the following;
Thule WingBar Evo Crossbars - Aluminum - Black - 53" Long - Qty 2, part # TH711420,
Evo Clamp Feet for Thule Crossbars - Naked Roofs - Qty 4, part # TH710501,
Fit Kit for Thule Evo Clamp Roof Rack Feet - 5046, part # TH145046, and
Thule One-Key System Lock Cylinders - Qty 4, part # TH450400.
This rack comes with the WingBar Evo Crossbars. The crossbars... view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver # 76128, which is confirmed to fit your 2017 Honda CR-V, comes in a box that measures 45x8x23 inches and has a shipping weight of 30 lbs.
I have attached an installation video for you to check out as well. view full answer...
Yes, we do. I recommend the Curt Trailer Hitch item # C13397 for your 2023 Honda CR-V Hybrid. This hitch is custom fit and bolts to your CR-V with included hardware. It fits all models of the CR-V including your hybrid.
I really like the Curt hitch because the crosstube installs behind your rear bumper cover which completely hides it. This leaves only the 2" receiver visible. This not only looks better but it helps with ground clearance.
I have attached an installation video so you can... view full answer...
The measurement you're looking for is the rear hatch clearance measurement which is from the center of the front crossbar to the line where the roof and hatch meet on your 2018 Honda CRV. That measurement needs to be 52 1/2 inches for the SportRack Horizon Rooftop Cargo Box to clear your open hatch. The SportRack has a sleek design providing a low profile and would look great on your CRV.
For the Yakima SkyBox 12 Rooftop Cargo Box # Y07334 the rear hatch clearance requires 57 inches between... view full answer...
I checked with Yakima and there's no difference at all. Yakima just changed the part number. This is a common occurrence that they do often. Both 8000146 and 8000162 are the BaseLine Towers for Yakima Crossbars item # Y28TR. 8000162 is just Yakima's new inventory number. If you have the older 8000146 from a different roof rack it will work in place of the 8000162.
The BaseLine Towers for Yakima Crossbars item # Y28TR fit multiple Yakima roof rack kits for the 2019 Honda CR-V with a naked... view full answer...
The AirBedz XUV Air Mattress # 341030 that you referenced in your question has overall dimensions of 66 long x 52 wide (at the widest point) x 10 deep.
Another air mattress that fits your 2013 Honda CR-V is the Pittman Outdoors Rear Seat Air Mattress # 341033 which is smaller and which is intended for use in the second row seat. This mattress has dimensions of 55 long x 35-1/2 wide x 17-3/4 tall. These and other mattress items for your 2013 CR-V appear on the linked page.
All of these... view full answer...
The maximum tire width that the Demco Kar Kaddy part # DM9713045 can fit is 76 inches. So if you measured from outside to outside on the tires of your vehicle and it was less than 76 inches this would work well. view full answer...
With the Thule Tire chains like the Thule Tire Chains # TH04115225 installed we typically recommend a speed rating of between 30-35 miles per hour as the maximum speed.
There are no chains that will allow you to travel faster than that. Also, if you are in snowy enough conditions to call for chains you probably shouldn't be going faster than 30-35 MPH even with the extra traction that chains provide. view full answer...
Yes we can. Once the etrailer Class 3 Hitch # e98848 is installed on a 2024 Honda CR-V, the hitch receiver will be 13-1/2" from the ground. This is measured from the top inside edge of the 2" receiver to the ground. view full answer...
The listed weight capacity of the Rola TX-104 4-bike rack, part # 59401, is correct at 100 lbs for 4 bikes. The Yakima hanging hitch 4-bike racks do seem to run at a little higher weight capacity for 4 bikes at 120 lbs, and the Thule hanging hitch 4 bike racks are at 140 lbs weight capacity.
I am including links to product pages of the Thule and Yakima 4-bike hanging bike racks. Also, I will include a link to the installation instructions on the Rola bike rack that will list the weight... view full answer...
I spoke to my contact at Roadmaster who told me that the 7-Wire to 4-Wire straight cord kit, # RM-98164-7, is 6-1/2 feet or 78 inches long. If you need even more length I recommend the Flexo-Coil kit, # RM-164-7 which is 8 feet or 96 inches long when stretched out. view full answer...
The Thule Motion XT Rooftop Cargo Box, # TH629706, had a minimum crossbar spread of 23-5/8 inches and a maximum of 36-7/8 inches.
To measure crossbar spread measures from the center of the front crossbar to the center of the rear crossbar. view full answer...
According to my Roadmaster representative, their older # 5250 Falcon tow bar is indeed compatible with MX base plates.
To wire the tow vehicle and the CRV together, there are some different alternatives. A wiring kit like # RM-154 from Roadmaster would permanently tap into the vehicle's wiring. I've linked a video of the install for you. A bulb and socket kit like # RM-155 would permanently install an extra bulb into each taillight assembly. The installation is permanent, but allows the... view full answer...
Go To Results