The difference between the 5th wheel installation kits # RP30852 and # RP30074 is what they fit. Kit # RP30852 is designed for 2010 to current Dodge Ram 2500 and 3500 series. Kit # RP30074 was originally designed for the Signature Series hitches and it fits various Ram models going back to 2002.
There is also a capacity difference. Kit # RP30852 is rated for 25,000 pounds while # RP30074 is rated for 18,000 pounds. However, you should always go by what the truck is rated for as stated... view full answer...
The Envoy is an older brake controller that Tekonsha does not sell any longer. I do not know much about the Envoy controller so I asked my Tekonsha rep what he thought about the two and he stated that the Voyager is a more effective/reliable and user friendly brake control unit than the Envoy unit.
The Tekonsha Voyager, part # 39510, is still sold by Tekonsha, and it has proved to be a valuable brake controller. I have added links to the Voyager instructions as well as a video review of... view full answer...
There's a few differences.
• The Curt # C31017 is manufactured in the US, while the Draw-Tite # 65046 is manufactured in Mexico.
• When installed, the Curt hitch will sit higher on the vehicle for more ground clearance. The underside of the
receiver tube will sit even with the bottom of the fascia under the bumper. The fascia will need to be notched so
the receiver can pass through it. Unless you're planning on carrying something very heavy on the front of the
truck like a generator... view full answer...
Although Curt recommends the use of black graphite grease with their 5th wheel hitch, you could certainly use the LubriMatic Mini Grease Gun Kit with Multi-Purpose Grease part # L30132 for an alternative option as stated by our Curt representative. view full answer...
If you are looking for an over the cab ladder rack with sliding tracks you will want the TracRac SR Sliding Truck Bed Ladder Rack w/ Over-the-Cab Extension part # TH43003XT-501EX. view full answer...
If you are looking for something that will take out the squat at the rear end of the truck when connected to a travel trailer then the best option is weight distribution. But if it is a 5th wheel trailer you will be towing then suspension enhancement would be the way to go.
The difference between Timbren systems # TDR1500DQ and # TDRTT1500 subtle. Basically, the one you will want is # TDR1500DQ rated for 6K. The other kit, # TDRTT1500, is designed for service vehicles only like utility... view full answer...
There are a few differences between the Curt and the Reese fifth wheel hitches. I am comparing the 20,000 lb hitches, the Curt is part # C16130, and the Reese is part # RP30928. Both are good hitches but do have some differences to take note of.
Both have custom installation brackets available. The Curt hitch has a vertical load limit of 4,000 lbs, and a height adjustment between 13 to 17 inches, where the Reese hitch has a vertical load limit of 5,000 lbs and a height adjustment from... view full answer...
The Husky Custom Mounting Bracket Kit, # HT31565, is going to require drilling into the frame to install the frame brackets where as the part # HT31413 does not. view full answer...
You will want to use the Super Springs SuperCoil 2600-lb front spring kit # SSC-22 in your 1999 Ram 2500 4x4. The other kit # SSC-23 that is rated for 5000-lbs is intended for heavy-duty commercial vehicles that have a permanently-mounted commercial-grade snow plow which will need much more support. Kit # SSC-22 will handle the load of a winch and mount or a consumer-grade plow. view full answer...
I would personally go with the Hide-A-Goose, # 9460-39, because the only part of the hitch that will be sticking out above the bed is the hitch ball. The Fold-Down Gooseneck Hitch, # 8339-4439, will have the entire ball plate sticking out above the bed (see photo). This may be an inconvenience if you use your truck to haul anything other than your trailer such as plywood, drywall, rock or anything else that could get caught on the hitch ball plate.
Also, it doesn't hurt to have the higher... view full answer...
The main differences between the Curt Trailer Hitch Receiver part # C15704 (Standard) and the Curt Trailer Hitch Receiver part # C15809 (Commercial) is that the commercial version hangs down lower which is by design to allow for better clearance on models with service bodies. It's almost a 3" difference in drop. view full answer...
The main difference between the Derale Series 8000 Transmission Cooler, # D13504, and the Derale Dyno-Cool Transmission Cooler, # D12904, is the construction. The Dyno-Cool cooler is a Tube-Fin style cooler has aluminum fins surrounding the tubes. The aluminum fins dissipate the heat from the transmission fluid in the tubes.
The Series 8000 cooler is a Plate-Fin cooler. Plate-fin coolers are similar to tube-fin coolers, but they are more efficient. On these coolers the fluid is forced... view full answer...
The Draw-Tite Front Mount Trailer Hitch Receiver # 65046 and Curt Front Mount Trailer Hitch Receiver # C31017 that fit your 2006 Dodge Ram 3500 are very similar in the mounting location. The main difference that I see is where the cross tube and receiver come together. The cross tube on the Curt is cut and the receiver passes through it. While the Draw-Tite receiver is welded to the bottom of the cross tube. Not having that cut in the cross tube will make it stronger which is why I would... view full answer...
The Bulldog Winch Trailer Winch - Synthetic Rope - Hawse Fairlead - 4,400 lbs # BDW15020 is a really great winch designed for utility trailer use. It is able to be used as a boat trailer winch, but it has a slower run time with a long recovery cycle.
The Dutton-Lainson TW4000 StrongArm Electric Winch - Marine - 4,000 lbs # DL25200 is my recommendation with almost twice as fast a line speed under load and nowhere near the amperage draw. This will serve you better for your 4,500 lb boat... view full answer...
All four manufacturers, Demco, Husky, Curt, and Reese are great companies that have been in the 5th wheel towing business for a long time. I would have no problem recommending any of them for a towing setup.
Since your 1999 Dodge Ram has a 6 foot bed you will need a sliding 5th wheel hitch to give you extra turning clearance for those tight turning situations.
The best 5th wheel sliding hitch that we have to offer is from Demco. The Demco Hijacker Autoslide 5th Wheel Hitch enables you... view full answer...
When comparing the Stromberg Carlson 5th Wheel Tail Gates, # VGD-02-4000, and # VGD-02-100, there are several key differences. First, in terms of materials and construction, the 4000 series is made of composite materials and is lighter. The 100 series is made from steel and is heavier. The 4000 series features a glass-filled, black composite plastic frame that is blow molded to create a lightweight yet strong-as-steel tailgate. It does also feature a lock like you have mentioned.
You also... view full answer...
There is no difference between the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1308 and part # BWGNRK1308-5W, they are the exact same parts and will work great on a 2007 Dodge Ram. The "5W" is simply for internal purposes. view full answer...
There is no difference between the B&W Underbed Trailer Hitch, # BWGNRK1394 and # BWGNRK1394-5W. They are listed separately because we want to identify them under both gooseneck and fifth wheel searches; but both are able to be used as a gooseneck hitch or with the Companion fifth wheel hitches.
Please note the video links attached below. view full answer...
The only difference between the:
-Dexter Trailer Idler Hub Assembly for 9,000-lb to 10,000-lb Axles # 8-288-3UC1,
& the,
-Dexter Axle Oil Hub for 9,000-lb - 10,000-lb General Duty Axles # 008-430-03, is that # 008-430-03 is the new style, and is designed to work with 9,000 LB & 10,000 LB General Duty Axles After April 2013.
Whereas, the Dexter Trailer Idler Hub Assembly for 9,000-lb to 10,000-lb Axles # 8-288-3UC1 is the old style, and is designed to work with 9,000-lb axles made after... view full answer...
I spoke with my contact at Curt about your 2014 Dodge Ram 1500. They said it would depend on how you are planning on using the hitch you choose.
If you are planning on towing something that would require a weight distribution system when towing, you will want the part # 13374. Weight distribution is needed if your trailer weight is more than 50 percent of your truck weight, or if the rear of your truck sags when the trailer is hooked up, or you experience trailer sway. I have attached... view full answer...
Go To Results