We do offer hitch fits for the 2018 Dodge Durango that don't require removing the rear fascia in order to install it. The Draw-Tite Class III hitch, part # 75713 would be one of those fits, but I personally prefer the Curt # C13182 because I believe Curt does a little nicer job with their powder coating process. If your spare tire is a full size tire on a wheel larger than 18 inches, the spare won't be able to be stored under the vehicle once the hitch is installed. R/T models with dual... view full answer...
There are two different trailer wiring harnesses for a 2002 Dodge Durango which will be dependent on whether or not you have the tow package. If you do have the factory tow package then you can use the T-One Vehicle Wiring Harness part # 118381 which only uses one plug but if you don't have the factory tow package then you will need to use the T-One Vehicle Wiring Harness part # 118334 which uses two plugs.
It doesn't sound like you have the factory tow package therefore will need the... view full answer...
If the 725 pound figure represents the maximum tongue of your trailer when fully loaded, I would recommend the Reese Strait-Line Weight Distribution System, part # 66073. This system combines the High Performance Trunnion Weight Distribution System with the Dual Cam Sway Control System. The Dual Cam system is the top of the line in sway control, and will prevent trailer sway before it can occur.
The system is specifically designed for trailers with tongue weights from 400 to 800 lbs.
If... view full answer...
Since you do not have a factory 7-way connector on your 2016 Durango, there is no brake controller plug-in adapter and a brake controller will have to be hardwired.
If you have no trailer connector on your Durango I recommend part # 118617. This plugs into the vehicle wiring behind the tail lights. Then just run the hot lead wire up to the positive battery post.
You will then need part # ETBC7. This plugs into the 4-way connector and with additional wiring will give you a 7-way and... view full answer...
We do have an option to get your 2022 Dodge Durango wired up to use the Curt Echo Brake Controller # C51180, but the Tekonsha OEM Replacement Vehicle Wiring Harness # TK22113 has not been confirmed for the 2022 model year, unfortunately.
With that being said, the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat # 118617 is a confirmed plug and play wiring harness, but you will need to run a wire up to the battery for needed power. To get this up to a 7 Way, you will need the 7-Way... view full answer...
Yes, the DeeZee NXc Running Boards w Custom Installation Kit # DZ16201-16241 that you referenced are a confirmed fit for your 2018 Dodge Durango GT and will work great. view full answer...
If your 2002 Dodge Durango did not come with a factory installed 7-Way trailer connector then you will need to hardwire in a brake controller. There are 3 parts you will need: 1) a 4-Way trailer wiring harness (unless the Durango already has a 4-Way) # 118334. 2) a 4- and 7-Way installation kit # ETBC7. And 3) a brake controller. I have included some links that explain this type of installation for you.
If your Durango does have a factory 7-Way then the plug should be present under the... view full answer...
The trailer hitch I recommend for your 2019 Dodge Durango is the Draw-Tite # 75713 because of its large 900 lb tongue weight capacity and the fact that it does not require drilling into your Durango's frame to install. This hitch has a 2" receiver and 6,000 lb towing capacity, though that number increases to 7,500 lbs when used with a weight distribution system. Please keep in mind that you will need to check your Durango's owner's manual for the vehicle's towing capacity and abide by whichever... view full answer...
I spoke with my contact at Swagman and she told me that you would have to subtract the weight of the rack and bikes to get the most accurate tongue weight capacity of the Swagman Original, # S64675.
So without bikes on the rack, your tongue weight with the rack installed would be 350 pounds. It has a gross trailer weight capacity of 3,500 pounds. view full answer...
There is a way to install a Rhino Rack Pioneer Platform on your 2015 Dodge Durango but you'd have to go with a universal style platform since Rhino Rack does not offer a direct fit Backbone style rack. So you'd need a roof rack installed like the Rhino Rack part numbers # RRVA137S-2, # RRRLKVA, and # DK299.
Then for a platform we have the 58 by 47 inch part # RR42115BF or the 48 by 38 inch # RR42114BJ. view full answer...
First thing you will need is a 4-way flat connector like the Tekonsha T-One Vehicle Wiring Harness # 118617. This will power the lighting circuit portion of the 7-way. It will connect to your tail lights to provide the running lights, turn signals and brake lights portion of the 7-way harness.
The Universal Installation Kit for Trailer Brake Controller # ETBC7 will connect to the 4-way flat connector and give you the additional wiring that you need to run both the brake line circuit and... view full answer...
For your 2011 Dodge Durango without factory tow package I recommend the T-One Wiring Harness # 118552 from Tekonsha.
This 4-pole wiring kit includes a powered converter which acts like a safety switch to protect the internal wiring inside the truck in the event of a bad short or other wiring fault on the connected trailer. It is a lot less costly to replace a trailer harness kit than the internal wiring in your Durango.
This Tekonsha kit installs mostly by just plugging in connectors... view full answer...
For the wiring, you can add a 7-way to your 2021 Durango, but the harness you mentioned won't fit, so you will need a couple different parts. First you'll need a 4-way for the lighting functions, and then a 7-way adapter which will give you the rest of the wiring. Exactly what you'll need is the following:
- T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118617
- Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat # ETBC7
The # ETBC7 has... view full answer...
We have exactly what you're looking for!
It's the WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front Pair # WT62NJ. It's custom-molded for your 2021 Dodge Durango. These are premium flaps digitally installed to fit your truck. If you're looking for the rear flaps as well, we have them here. They're part # WT72NJ. They can also be purchased as a set # WT74PJ. view full answer...
Absolutely!
Starting with the trailer hitch for your 2020 Dodge Durango, I highly recommend the Curt Class III # C13182 because it features a superior black powder coat finish that holds up better over time than those from other manufacturers (for longer rust resistance) and sits just a bit further behind the rear bumper than the alternatives for a more hidden/cleaner appearance. This hitch will provide you with a 2" receiver opening and features a 6,000 pound towing weight capacity.
I... view full answer...
Yes, the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter # TK22113 will work for your 2020 Dodge Durango without the factory tow package. This tees in behind your tail lights and then gives you all of the wiring and parts you need for a fully functional 7-Way plug.
For a brake controller I really like the Redarc Tow-Pro Elite # RED44FR because it is the most versatile brake controller we have and it uses a color-code system to tell you what's going on so you... view full answer...
It looks like you have a Roadmaster tow dolly. If that's the case, the ratchet itself is part # RM-2110 and the ratchet mounting bracket is the part # RM-2000-31 that you'd looked at. The bracket and ratchet will fit either the driver or passenger side of the tow dolly. There is noRM dedicated right or left side part. view full answer...
We checked with DeeZee and they told us that the DeeZee NXc Running Boards w Custom Installation Kit # DZ16201-16241 fit all models of the 2021 Dodge Durango including the RT models like what you referenced. view full answer...
Yes, the Roadmaster Direct-Connect Base Plate Kit # 266-3 will work with your Roadmaster Sterling All Terrain, Non-Binding Tow Bar # RM-576. However, the EZ Hook safety cables included with Roadmaster's Sterling tow bars will not work with direct-connect base plates. These cables connect to an anchor plate on the Quick Disconnect crossbar, which will not be present when you are using these base plates view full answer...
We have a solution for you, but we do not carry the adapter you are looking for.
A much easier solution would be to cut off the connector on your trailer and replace it with a 7-way like part # H20043 since that would make your trailer easier to connect to your vehicle and other vehicles.
You would need to determine the functions of each of the wires on your trailer first. You can do this by running a jumper cable to each of the wires from a 12 volt battery. Once you do that you can then... view full answer...
Go To Results