We offer a quick-connect wiring adapter for your 2014 Dodge Durango with factory 7-way to allow simple installation of a Tekonsha Prodigy brake controller # 90885. Part # TK93VR will connect between the controller and the vehicle's under-dash port.
If your Durango does not have a factory-installed 7-way you will instead use a brake controller install kit # ETBC7 along with a 4-pole wiring harness like # 118617. An install video and article are linked in case you need this option. view full answer...
Though The Curt T-Connector Vehicle Wiring Harness # C62VR is not confirmed for your 2022 Dodge Durango I have the correct wiring harness for you!
The T-One Vehicle Wiring Harness # 118617 will plug into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will need to remove the tail light assemblies to access this harness. Once you've plugged in the T-connector, you will need to run the hot lead up to your car's battery. Connect... view full answer...
Yes. You can use any standard ball mount with your Replacement Shank for Gen-Y Adjustable Ball Mount - 2" Hitch - 5" Drop/Rise - 16K # 325-GH-503 or you can use the ball mount that typically comes with this system which is available with the Replacement 2-Ball Mount for Gen-Y Adjustable Ball Mounts w/ 2" Receivers - 16,000 lbs # 325-GH-051. This is a ball mount that comes with both 2" and 2-5/16" hitch balls to allow you to tow a variety of trailers as well. view full answer...
To add a 7-way to your 2018 Dodge Durango without a factory towing package you'll need a couple parts. The first is a 4-way, the T-One Vehicle Wiring Harness # 118617.
After that you will need the Universal Installation Kit for Trailer Brake Controller # ETBC7, which will give you the 7-way connector (which plugs into the 4-way), circuit breakers and the rest of the hardware needed for a functioning 7-way. I have added links to video reviews and installs of these parts for you to check... view full answer...
On the Fastway e2 Weight Distribution Shank # FA92-02-4213 the drop position from the top to the center of the first hole is 1-11/16 inches and in the rise position the same measurement is 1-5/8 inches. Error on the picture below it is suppose to say 1-11/16 not 1-1/16.
I attached a review video link below. view full answer...
Blue Ox offers base plate kit # BX1939 for your 2000 Dodge Durango SLT (as long as it does not have a brush guard) and this kit is compatible with many of their tow bars, including the Acclaim, Adventurer, Aladdin, Allure, Alpha, Avail, Aventa, and Trion tow bars.
Since you already have a braking system such as the Blue Ox Patriot # BLU37TR you will need only a few other items to complete your flat towing setup. You may care to refer to the linked article that addresses each item needed.... view full answer...
Installation of a trailer brake controller like the excellent Prodigy P3 # 90195 in your 2012 Dodge Durango that did NOT have a factory-installed trailer socket will require hardwiring.
Usually the brake controller connection port must be factory-installed; rarely is this something a dealer could install. Although it might be possible, strictly speaking, the labor costs at a dealership would likely be pretty high and make this step prohibitive.
Since I do not know what type of wiring... view full answer...
We have the perfect hardware needed for your Curt Hitch on your 2011 Dodge Durango. You will need the recommended hardware so you will not effect the warranty of your vehicle.
The Replacement Hardware Kit for Trailer Hitches # RHK is the correct hardware needed for the Curt Hitch # C13182. When bringing up the hitch you will have to type in C13182 in the hitch item number box, and add it into the cart.
I attached a review video link below. view full answer...
If your 2006 Dodge Durango didn't come with trailer wiring from the factory then you'll need the T-One Wiring Kit # 118390. This gives you 4-Way wiring for your basic trailer lighting functions. I've attached an installation video of this kit that you can check out.
To complete a towing setup you also need a ball mount kit. I recommend checking out Ball Mount Kit # 989900 because it includes two ball mounts, one with a 3/4” rise/2” drop and the other with a 2-3/4” rise/4” drop, a 1-7/8”... view full answer...
According to my research your 2019 Dodge Durango SXT can tow up to 6,200 lbs and your 2000 Jayco Kiwi 17A has a GVWR of 3,300 lbs so your Durango will be able to easily and safely tow this trailer.
To get you setup for towing I recommend picking up the following parts:
Draw-Tite Max-Frame Trailer Hitch Receiver - # DT38MR
T-One Wiring Kit - # 118617
Universal Wiring Kit - # ETBC7
No-Drill Bracket - # C57202
Redarc Tow-Pro Liberty Brake Controller - # RED24FR
Wiring Harness - # RED69FR
The... view full answer...
When it comes to getting the replacement hardware for a Curt Front Mount Hitch for your 2002 Dodge Durango you will need The Replacement Hardware Kit for Trailer Hitches # RHK. When you bring up the #RHK there will be two boxes you will need to fill out. The first one you need to type 31080 and then on the second box there is a drop down arrow scroll down until you find Curt.
I attached a review video link below. view full answer...
The only full Westin grille guard we carry for the 1999 Dodge Durango is part # 40-0145 and its replacement brackets are part # 40-014PK.
If instead you just have the Safari light bar, part # 30-0005-1085 or # 30-0000-1085 then instead use part # 30-1085 for the brackets.
If the guard you have doesn't appear to be any of these send me some pictures of it and I'll see if I can track down which model you have and its replacement brackets. view full answer...
We do not carry the Ultra Faucets Steel Shower Hose # 277-000064 in chrome we only have it available in the oil rubbed bronze. The hose is 59 inches long.
If you have any further questions please feel free to reach back out to me anytime and I will be more than happy to further assist you. view full answer...
The left and right hand assemblies as a kit for 10 inch, self-adjusting brakes is # AKEBRK-35-SA. They'll need to be adjusted once at the initial install but that's it. They're also labeled left and right to make the install process easier.
To find the correct hub and drum assemblies with the bearing kit I'll need the inner and outer bearing numbers currently on your trailer. If you can respond back with them, as well as your bolt pattern, I'd be happy to find the correct parts. view full answer...
In order to determine if you would need to install a Roadmaster Brake-Lite Relay Kit # RM-88400 with your Roadmaster Diode Kit # RM-154 you will need to follow the following guide:
Are you using a supplemental braking system that depresses the brake pedal in your towed car?
No - You do not need a brake light relay.
Yes - You may need a brake light relay. Continue on to the next question.
Do the brake lights on your towed car illuminate while the engine is off?
No - You do not need... view full answer...
Trailer axle # 20545I-EZ-60-10 does not come with the u-bolts but they are available, # APUBR-10. The related parts on the right hand side of the product page shows this and the other possible accessories you may need. The axle does come with the sprint seats and spindles already welded on. view full answer...
To add suspension enhancement to your 2017 Dodge Durango you need the Air Lift AirLift 1000 Air Helper Springs for Coil Springs # AL60824. This will definitely help to alleviate rear sag for your towing setup. This kit is rated for up to 1,000 lbs (it will not increase the weight rating of your Durango), is made in the USA, and comes with a lifetime warranty. I have attached an installation video of this kit on a 2015 Durango that you can reference.
I did take a look at the picture that... view full answer...
First you will need a Draw-Tite Max-Frame Trailer Hitch Receiver # DT38MR. This is my favorite receiver for your 2021 Dodge Durango as it is the only one that will fit behind the removable factory bumper cover. The receiver is rated for a tongue weight up to 900lbs and trailer weight of 7,500lbs. If you are using a weight distribution hitch the tongue weight increases to 1,125lbs. Be sure to not exceed any towing capacities given by Dodge for your Durango.
I highly recommend using a weight... view full answer...
The available wiring harness for your vehicle, item # 118390 connects inline with plugs behind the taillights and you will need to run a hot lead to the battery.
The power wire is needed to protect the vehicles sensitive circuitry. The trailer lights will be powered by the vehicle battery but will get the signals from the vehicle turn, brake and tail light functions. view full answer...
Yes, the Curt Echo Wireless Trailer Brake Controller item # C51180 is completely plug and play. All you need is a functional 7-way connector and a smart phone to utilize this brake controller. I have linked an installation video so you can see the ease of setting up and using the Curt Echo.
To get your 4-flat connector to a functional 7-way you will need the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires item # ETBC7L. The kit includes... view full answer...
Go To Results