RoadMaster 6-Wire Trailer Connector - Vehicle End
(266 reviews)
Price: $26.89
In Stock
RoadMaster 6-Wire Trailer Connector - Vehicle End
Item # RM-910030-7
Our Price: $26.89
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (266)
- Q & A (0)
- Videos (11)
- Photos
Roadmaster Trailer Wiring - RM-910030-7
- Trailer Connectors
- Vehicle End Connector
- 6 Round
- Plug Only
- Roadmaster
Replacement socket fits RoadMaster 6-wire straight and Flexo-Coil electrical cords and includes a lid to keep the socket covered when it is not in use.
Features:
- Socket designed for RoadMaster 6-wire electrical cords
- Also works with standard 6-pole trailer connectors
- Cap included to cover the connector when not in use
910030-7 RoadMaster 6-Wire Connector Socket with Lid
Video of RoadMaster 6-Wire Trailer Connector - Vehicle End
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for RoadMaster 6-Wire Trailer Connector Installation - 2021 Ford Ranger
Hey everybody, Ryan here at trailer. Today on our 2021 Ford Ranger we're gonna be checking out and showing you how to install the RoadMaster six way round connector plug. So just to kind of give you guys an idea on what your connector plug will look like when you're not using it, whenever you're just kind of cruising around town, you can see it's gonna do a pretty good job of blending in. Thankfully the Ranger has a lot of different spots where we can mount this up and it's kind of dark in this area. So with the plug being black in color it does do a great job just kind of, blending in to the front of your Ranger so it don't stick out too bad. With that said, when you're not using it it does have a spring loaded cap and it's pretty tight actually.
And so that's going to have a seal on the bottom and sit up nice and tight against a connector plug itself and that's what's gonna help keep out any dirt, debris, moisture and things like that, which are in my opinion the number one demise for these plugs is corrosion. So with this cap on there that should really help that out. So whenever you are ready to use it and you hook up your flat tow components all you have left is your wiring. The connector plug is going to accept wires like this with the six way round. And when you plug these in what's nice is that connector plug is super tight, not loose and it really doesn't loosen up over time.
You see a ton of these come into the shop and they pretty much stay tight. So gives you a little confidence knowing hey it's not gonna wiggle around then my lights aren't gonna work when I'm driving down the road. With that said, I can think of a few different reasons why you would need just a connector plug. One of them being, it ended up getting damaged, maybe a rock flew up here, something and busted it or you could potentially over tighten the screws that hold it and then crack it or something like that. Or if you have an old kit that you're transferring over to a newer vehicle and just wanna be on the safe side, have a new connection up here.
Couple of other reasons, some kits, some wiring kits actually don't come with the connector plug. So you can pick this one up to try to complete the package. I've seen other kits that do have the connector plug and they're just kinda chinchy, so you could upgrade to a better one. Like I said, we have a ton of experience with these plugs in particular almost every flat tow set up that we do we end up using this. So they're reliable and we know they work out well.
So at the end of the day, a great replacement or even upgrade to your tow bar wiring setup. Now, as far as getting this hooked up super straight forward, everything is labeled and so you really can't, you really can't hook it up wrong. With that said why don't we go ahead pull into the garage and put it on together now. To get the connector plug hooked up we're gonna here at the front and we're gonna be hooking it up to our existing diode wiring here. I'm gonna set the plug aside for now kind of get everything else ready. You gotta take the rubber plug or the rubber dust cover rather off the connector plug, slide that over your wires kind of just push that back out of the way for now. And then we need to strip each individual wire back a little bit. You can then grab the connector plug. All right and if you look at the back of it we're gonna have several terminals. We're gonna be using four them and they are labeled. So this one here is labeled TM for taillight, brown wire will go to it. This one here is labeled GD for ground, so the white wire will go to it. We have LT for left turn, so the yellow wire there. RT for right turn, so the, green wire will go to it. And something I wanna mention if you happen to have a charge on it or something like that the majority of the time you'll hook that to the center, if that's your scenario. But that said, the other way these are gonna work is you're just gonna back the set screws out so you can use a small Phillips screwdriver run these out. I try not to take them out completely cause they being so small, they're easy to lose and even if you do find it they're kind of tricky to get started back in there again. So just back it out a little ways. And what's gonna happen is we can then hook each wire to the corresponding terminal. So we'll start with this one, which is TM for tail, put the brown wire in it. Kind of hold it in place and then tighten down that set screw. So I do that same thing for each individual wire. So this is what the wires look like when they're all hooked up. And what you can do is apply some dielectric grease to the terminals to help prevent any corrosion. I wait until the very end to do that, once I test it and make sure everything is working and our flat tow set up is complete that way if you have to make changes we don't have to deal with all that grease. So for the time being we'll just take our cover there slide that back over it. And then I'm gonna attach it to this bracket. It just needs a couple of screws. And then once we have it all secure, what we're able to do is we'll plug our wiring in, test it out and make sure all of our connections are hooked up properly and everything is functioning. So I went ahead plugged in to our test box. Now we can check all of our signals, try our tail lights, our left turn, our right turn, and our brake lights. And that'll finish up our look at and our installation of the RoadMaster six way round connector plug on our 2021 Ford Ranger..
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
RoadMaster 6-Wire Trailer Connector - Vehicle End - RM-910030-7
Average Customer Rating: 4.7 out of 5 stars (266 Customer Reviews)
Replacement socket fits RoadMaster 6-wire straight and Flexo-Coil electrical cords and includes a lid to keep the socket covered when it is not in use.by: Grant05/16/2023
This is a piece of junk….one of the male plugs was broken and I checked the current on the others and no current passed through from one side of the plug to the other. Complete Junk….do not buy this product. I ended up going to [store] and getting a curt plug that worked just fine.
by: Carol09/02/2023
I explained to Roger (I believe was his name) that I have a Blue Ox tow bar and base plate, The base plate was installed along with the wiring kit, but did not include the wire to go from the front of the grill to the interior of my Jeep to plug in my RVi brake, and this is what he sent me. I'm attaching a picture of what I have on my vehicle. Not only was it the completely wrong part, but it arrived in damaged packaging which I did not open. Please send return instructions.
Jenny N.
9/7/2023
I wish that I could say that we always get it right. I will have our Customer Service team contact you to make arrangements for returns.
by: Les 04/27/2024
After a year this connector is still working fine. No complaints.
by: Joseph 04/22/2024
worked with the wiring harness
by: Leehan03/25/2024
Bona Fide Roadmaster connector... Not a Counterfiet or knock-off
by: Timothy 03/06/2024
E trailer is the best. I was having trouble finding what I was looking for on line, so I called. She was able to send me a link and I had the part ordered in under 10 minutes.
by: Rhonda 03/11/2024
Etrailer has always exceeded expectations. We love their products dependability and the great customer service.
by: Cj02/10/2024
Excellent service good videos to help i nstallation!
by: Dean 04/29/2024
Parts are parts and you have to obtain what is necessary to finish the "loop"; our product & order specialist Kelsey knew how to put it all together and we can't thank her enough.
by: Ronmio07/04/2019
Towing Connections DON'T HAVE TO BE UGLY! (see photo)
I bought a new 2019 4x4 Jeep Cherokee Limited with the Active Drive II transmission. It included the Technology Group option with Adaptive Cruise Control, etc. I then bought the corresponding Roadmaster baseplate (521452-4) to couple with our old Falcon All-Terrain towbar from a previous Jeep.
The 6-PIN SOCKET (Roadmaster 910030-7) was mounted on the two stems that stick out from the baseplate's main receiver brace. However, I bent, angled, and shortened both stems so the socket would sit flush along the curved grill's centerline. I also drilled the holes deeper into the ends of the two stems so I could use longer (1"), #10, self-drilling screws. The screw heads were painted black.
All the WIRES were placed inside black, heat-shrink tubing and tucked out-of-sight using zip ties.
by: Janice02/18/2018
Received my package within days of ordering and I went back to the website for the video to install it! Thank you for the quick response and having videos available so that I could use, the video showed a much more professional appearance than how it had been done. I’ve enclosed a picture!
Janice
2/21/2019
So far it’s been working great!
by: Alan04/17/2024
Wonderful product.
by: Beryl04/29/2024
Perfect, excellent product.
by: Charles 08/30/2023
This was my original, but the pins got pushed out the back, so I tried another popular brand, only to find the all-metal assembly put the possibility of the wires shorting out within the "risky" category, so I went back to the non-metallic part, which won't "short" out and cause a problem. Fingers & toes.
by: Eric09/11/2023
You did not ship a Roadmaster but instead a no name made in china product. I emailed you guys yesterday and tomylynn wants photos. I installed it as I can’t wait for another as we travel full time. The item sent does work but not what I ordered.
by: Bill P.07/22/2023
This connector I installed is plastic, so be careful as to not tighten the mounting screws to tight it could crack, when connecting wires that you are putting the right wires in place, markings on back side of connector are very small hard to read, would be nice if they would send a diagram of where wires go.
by: Rick06/10/2022
It is mounted on the bull bar of my 2019 JLU Wrangler. The umbilical has never disconnected while underway. Very good quality.
by: Gregory 04/19/2024
Just what was needed
by: Donald05/26/2023
We tow a 2022 Ford Escape behind our Winnebago motorhome. This wiring kit did the job for us. Everything working great!
by: Dana02/10/2019
I purchased this along with the 477-1 base plate. Excellent products and base plate was vehicle specific. Bolted on with very little effort. Bolted into the main frame of my 2009 Ford Ranger FX4 pickup truck without any modifications. Would definitely recommend to anyone.
by: Carey07/29/2023
Install went very well. Instructions were spot on.
Very pleased with results.
Will be ordering more items to improve stability and control on my Class C.
by: Jeffrey 07/25/2023
This was purchased to replace a broken connector. Was exact fit. Swapping wires was easy. Thank you.
by: Ralph06/14/2023
Produce was well described and arrived on time with clear installation instructions.
by: Mark06/09/2023
Installed this on our Chevy Equinox so the battery doesn't get drained while towing it. More convenient than pulling a fuse. Easy install. Highly recommended.
by: Ann 01/16/2024
Good Quality. Easy install. Works well.
25
266
Show More Reviews
See what our Experts say about this Roadmaster Trailer Wiring
- Recommended Roadmaster Base Plate for a 2023 Ford Escape PHEVTo install a Roadmaster base plate on a 2023 Ford Escape PHEV, you will want the Roadmaster Direct-Connect Base Plate Kit item # RM77GR. I checked with Roadmaster and this base plate has been confirmed to fit the Hybrid and Plug-In Hybrid models. I have linked an installation video below to help you get it set up. Some other parts you will need to tow your 2023 Ford Escape Plug-In Hybrid are listed below: Charge Line - Roadmaster Battery Charge Line Kit for Towed Vehicles item # RM-156-25 Supplemental...
view full answer... - Installation of Roadmaster Invisibrake on 2015 Buick Enclave and Pulling Fuses For Charging BatteryIt sounds like you've got a pretty good idea of what you want to do, and it looks like you've got a good parts list for your 2015 Buick Enclave. When it comes to installing the Roadmaster Invisibrake # RM-8700 the best location is typically under the driver's seat, but you can reasonably install this unit anywhere in the cabin of the vehicle where the adjustment knob is easily accessible. In the installation on a 2015 GMC Terrain it was installed in the rear cargo area of the vehicle. In...
view full answer... - Mounting Hole Dimensions On RoadMaster 6-Wire Trailer Connector The center-to-center distance of the mounting holes on the RoadMaster 6-Wire Trailer Connector, part # RM-910030-7 is 3-3/4 inches. The mounting holes can accommodate up 1/4 inch bolts when installing.
view full answer... - Parts to Flat Tow 2007 Chevy Tahoe and 2018 Ford F-250 with Crossover PartsId be more than happy to help you out with the parts needed to flat tow both your 2007 Chevy Tahoe and your 2018 Ford F-250! I'll go ahead and list out the parts for each vehicle and I'll add a tag next to the parts that can be used for both. The Air Force One parts that will fit to your vehicles will cost more for both sets than some of the other braking systems will, but since you already have the one part installed on your Ventana and it's a really easy system to use once it's installed...
view full answer... - Recommended Components For Flat-Towing 2005 Jeep WranglerThe base plates I recommend for your 2005 Wrangler are the Roadmaster XL Base Plates, part # RM-521424-4. These will work on your Wrangler if you have the double tube bumper. The base plates have removable arms that make the baseplates almost invisible when removed. Since you said you have the Roadmaster Sterling Tow Bar, part # RM-576, it has the wiring that connects to your RV or vehicle. The tow bar should have come with a 6-way connector for the Jeep as well. If so, then you can use...
view full answer... - Parts Needed To Flat Tow a 2022 Chevrolet Blazer Behind a 2018 Newmar Baystar MotorhomeYes, we will have all the components you will need to be able to flat tow your 2022 Chevrolet Blazer. First you will need to select the correct baseplate. The Roadmaster Direct-Connect Base Plate Kit # RM28VR will only fit the 2.0L turbo engine models. While the Roadmaster Direct-Connect Base Plate Kit # RM-523204-5 will work with the 2.5L and 3.6L engines available on the Blazer. Both these baseplates are designed to connect to Roadmaster Direct connect tow bars like the Nighthawk # RM-676....
view full answer... - Diode Tow Bar Wiring Kit for 2006 Hummer H3 Using Roadmaster Nighthawk Tow BarSince your Roadmaster Nighthawk # RM-676 comes with a coiled umbilical the diode wiring kit solution would be the Roadmaster part # RM-152 with the 6-way connector part # RM-910030-7 and bracket # RM-910030-5.
view full answer... - Correct Wiring Kit for Flat Towing 2018 Chevrolet MalibuThe wiring kit you need in order to flat tow your 2018 Chevrolet Malibu is the Roadmaster Universal Wiring Kit with Smart Diodes for Variable Voltage Incandescent Tail Lights # RO94FR. Since this does not come with a connector you can use the RoadMaster 6-Wire Trailer Connector - Vehicle End # RM-910030-7. Be sure to consult your vehicle owners manual for specific information on flat towing the vehicle. I have attached some installation videos for your reference.
view full answer... - Base Plate For A 2021 Jeep Wrangler RubiconFor your 2021 Jeep Wrangler Rubicon I recommend the Roadmaster Direct-Connect Base Plate Item # RM-521453-5. This baseplate has removable arms which once removed, help the vehicle maintain a nice clean look. It installs on the chassis of the vehicle to give your tow bar a solid mounting location. To complete your flat tow set up it requires the following items: A tow bar, braking system, wiring, and safety cables. For a braking system I recommend the Blue Ox Patriot # BLU37TR. A braking...
view full answer... - Difference between the Roadmaster Falcon and Sterling All Terrain Tow Bar for 2002 Honda CRVFor your 2002 Honda CRV with brush guard I would recommend XL Plate Roadmaster Base Plate, part # 1541-3. The MX base plate, part # 1541-5 is designed for heavier vehicles and does not require a crossbar, but a crossbar is required on the XL base plate, part # 1541-3. For a tow bar with this application, I would recommend part # RM-576, for your 2002 Honda CRV. Part # RM-576 has a capacity of 6,000 pounds, and is compatible with the XL Base Plate, part # 1541-3. Part # RM-576 already...
view full answer... - Recommended Base Plate for a 2023 Ford Escape PHEV Yes, it will be if you use the Roadmaster Tow Bar to Blue Ox Brackets Adapter item # RM-031. This adapter will allow you to connect the Blue Ox Base Plate Kit item # BLU82CR, which is the only one that fits the PHEV 2023 Ford Escapes, and a Roadmaster Falcon Tow Bar like item # RM-520. Some other parts you will need to tow your 2023 Ford Escape PHEV are listed below: Charge Line - Roadmaster Battery Charge Line Kit for Towed Vehicles item # RM-156-25 Supplemental Braking System - Blue...
view full answer... - Parts Needed For Flat Towing a 2023 Jeep Wrangler Unlimited Rubicon With Roadmaster Falcon 2 Tow BarYou will want to use the Roadmaster Direct-Connect Base Plate Kit # RM-521453-5 on your 2023 Jeep Wrangler Unlimited Rubicon. This base plate will allow you to directly connect to your Roadmaster Falcon 2 Tow Bar # RM-520 without needing a separate adapter or crossbar. The arms on the baseplate are removable so you will not see them when you are not flat towing your Wrangler. To wire your Jeeps tail lights to function off the motorhome you will need either the Roadmaster Wiring Kit with...
view full answer... - Flat Tow Wiring for 2020 Jeep Gladiator and 2022 Chevy Equinox with LED Tail LightsThank you for all of the information! For your 2020 Jeep Gladiator I recommend using the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 and then for your 2022 Chevy Equinox with LED lights I recommend the Roadmaster Universal Wiring Kit # RO44FR and 6-Wire Trailer Connector # RM-910030-7. The Jeep doesn't require special diodes so you can use the standard wiring kit and then pair up the umbilical with the special wiring and connector needed for the LEDs on your Chevy. I've...
view full answer... - Parts Needed to Flat Tow 2022 Chevrolet Equinox LSTo flat tow your 2022 Chevrolet Equinox LS, you will need a base plate kit installed on your Equinox and a tow bar to connect it to your RV. Safety cables are a needed item in case the tow bar fails. And a wiring solution to synchronize your RV’s lights to the 2022 Chevrolet Equinox along with a supplemental braking system to synchronize your RV and towed vehicle's brakes. Once the selected base plate is installed and the tow bar attached to your RV it needs to be +/- 3" of being level...
view full answer... - Parts Needed To Be Able To Flat Tow A 2017 Buick Envision With a Roadmaster Falcon Tow BarThere are 2 sets of Roadmaster base plates for your 2017 Buick Envision. The first is the Roadmaster Direct-Connect Base Plate Kit # RM-523188-5. With this kit you do have removable arms that allow for a clean look when you are not towing your Envision. This will also give you the faster connection meathod as it does not require the installation of the crossbar. The Roadmaster Crossbar-Style Base Plate Kit # RM-523188-4 will require you to use a cross bar to connect to your Falcon Tow...
view full answer... - Recommended 2nd Vehicle Braking System for a Demco Airforce One Supplemental Braking System Since you already have item # SM99243 set up in your Tiffin motorhome you will just need the Demco SBS Second Vehicle Kit item # SM99209 for your 2023 Bronco. This kit includes all the parts needed to connect to your motorhome. I have attached an installation video below so you can see how to get this product set up. Some other parts you will need to flat tow your 2023 Bronco are listed below along with any installation videos we may have: Charge Line Kit - Roadmaster Battery Charge...
view full answer... - Parts Needed for Flat Towing a 2005 Mini Cooper 5 Speed Behind a Sprinter Class C Diesel MotorhomeThanks for all of the information and research on parts for flat towing your 2005 Mini Cooper behind your Siesta Sprinter diesel Class C motor home. You have most of the parts correct, but there are some specific items you will need for your Mini. First, you need to wire the dinghy so that the combined brake and turn signals on the motor home will activate both the brake and turn signals on your Mini. The brake pedal would activate the brake lights with the key in the position you describe,...
view full answer... - How to Attach a Toad with a 4-Way to a Motorhome with a 7-WayThe Blue Ox EZ Light Wiring Harness part BX88314 has a male 4-way trailer connector. The Mighty Cord Trailer Connector Adapter part # A10-6034VP also has a male 4-way trailer connectors so they will not plug directly into each other. The best option for you is to use the RoadMaster 7-Wire to 6-Wire Flexo-Coil Kit part # RM-146-7 or the RoadMaster 6-Wire Trailer Connector part # RM-910030-7 if you already have the adapter. You will need to cut off the 4-way on the Blue Ox harness and wire...
view full answer... - Parts Needed to Flat Tow 2022 Chevrolet EquinoxYes, I suggest the Roadmaster Direct-Connect Base Plate Kit, # RM-523193-5. This fits all trim levels WITHOUT lower active grill shutters. For a Blue Ox Base Plate Kit, you can use # BX1730. For a complete flat tow arrangement for a 2022 Chevrolet Equinox, you will need a base plate kit, safety cables and a wiring solution to synchronize your RV’s lights to the Equinox. You will also need a supplemental braking system to synchronize your RV and towed vehicle's brakes. Once the selected...
view full answer... - Recommended Wiring Harness and Flat Towing Parts for a 2020 Jeep Wrangler To control your 2020 Jeep Wrangler's lighting you will need the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267. It sounds like you may already have the cable, if you do you will just need the following parts to connect to your Jeep's lights and control them: Roadmaster Universal Hy-Power Diode Wiring Kit item # RM-152 RoadMaster 6-Wire Trailer Connector - item # RM-910030-7 Roadmaster Bent Electrical Socket Bracket item # RM-910030-5 The rest of the parts...
view full answer... - 6-Wire Adapter Needed For A 2022 Jeep Wrangler It sounds like you need the RoadMaster 6-Wire Trailer Connector # RM-910030-7. This will allow you to cut off the ends of the 4 way and splice them into the connector so your tow vehicle and toad can connect via the 7 way to 6 way cord # BX88206 you mentioned. You also may need the Roadmaster Bent Electrical Socket Bracket # RM-910030-5 so you can mount the socket. I have included a review video as well as a FAQ on trailer wiring that you might find useful.
view full answer... - Parts Needed For Also Flat Towing a 2011 Chevrolet Cruze With Roadmaster Falcon Tow BarsFirst you will need either the Roadmaster Base Plate # 523170-1 if you have an eco trim on your 2011 Chevrolet Cruze or a Roadmaster Base Plate # 523168-1 for all other trim levels. To connect your Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522 you will need a Quick Disconnect Crossbar Assembly # 910021-00 as the mounting systems for your Cruze require a crossbar. For the tail light wiring you will need the Roadmaster Universal Hy-Power Diode Wiring Kit # RM-152 and a 6-Wire...
view full answer... - What Is Needed To Connect A Demco Stay-In-Play To A Motorhome's 4-Pole ConnectorThe Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251 has a G-force controller that's only going to wire into the lighting signals that are already included in your 4-pole so you could get a diode wiring kit like # RM-154 (as long as you don't have ParkSense Proximity Sensors) and still use the 4-pole connector but you'd be much better off upgrading from the 4-pole to a 7-pole connector so that you can also run a charge line for your Gladiator. To convert your motorhome's...
view full answer... - How to Make Coiled 4-Way to 6-Way Adapter for Flat Towing VehicleSince we don't have an adapter exactly like you are wanting so you'd have to make one using the coiled wire part # RM-1064-B, for the 4-way part # HM48030, and then for the 6-way socket # RM-910030-7.
view full answer...
Do you have a question about this Trailer Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
Ryan G
Video by:
Andrew K
Video by:
Alan C
Video by:
Zach D
Video by:
Jonathan Y
Video by:
Michael B
Expert Research:
Michael H
Expert Research:
Jeffrey L
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Dustin K
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Grant
5/17/2024
I threw this away….it is junk. I went to a rv store to buy one that worked.