3/4" Round. Waterproof mini trailer light serves as either a side marker light or a clearance light. Amber polycarbonate lens. Recessed mount with grommet (sold separately). 2-Wire pigtail. P2 rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A P2-rated or P3-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Optronics Uni-Lite LED trailer clearance or side marker light. This is a small, round trailer light that's going to serve as either a side marker light or clearance light. It's got a sonically sealed design so it's waterproof, when it comes to the housing and lens unit, so it is submersible. It's an LED system, and LED is going to make great replacements for incandescent light. They last longer, they burn brighter, they're much more efficient. You don't have to worry about replacing bulbs, and you don't have to worry about brittle filaments. This one is going to feature a polycarbonate lens and housing, it's going to be an amber lens, and it is designed to be recess mount with a mounting grommet.
Your grommet is sold separately. If you're in need of that, you can find it here at etrailer.com. Your installation is going to require a 3/4-inch diameter hole at the desired mounting location. It's a 2-wire pigtail. We got a wire casing that keeps the wire together, and then we're going to have a black wire for power, white wire for ground.
It is Department of Transportation compliant. It meets FMVSS 108 and CMVSS requirements for automotive lighting. This is a P2 rated light. It's going to contain 1 LED or 1 diode. Taking a look at the overall measurements, diameter looking at about 3/4 of an inch, and when it comes to the depth, we're looking at about 7/8 of an inch.
Power draw at 12.8 volts. There is going to be 0.047 amps. And Optronics is going to put a lifetime warranty on the LED. We're going to go ahead and hook it up to our external power source, that way you can see what it looks like with power running to it. We'll also be able to turn off our overhead lights so you can see it in a low-light setting. You can see here that the light sends out a really nice, consistent signal.
Again, this is a small, round trailer light that's going to serve as either side marker light or clearance light, single LED design, and it's got that really nice amber lens that allows plenty of light to come through. That's going to do it for today's look at the Optronics Uni-Lite LED trailer clearance or side marker light.
Average Customer Rating: 4.8 out of 5 stars (701 Customer Reviews)
3/4" Round. Waterproof mini trailer light serves as either a side marker light or a clearance light. Amber polycarbonate lens. Recessed mount with grommet (sold separately). 2-Wire pigtail. P2 rated.Great service, I was notified of every step from purchase to delivery
These were designed as a clearance light application and at a great price. I bought them to use as turn signal lamps on my RZR. They are high quality and extremely bright when lit, so they work great for both applications. These guys have great parts at a great price and quick shipping. I would recommend them to anyone needing trailer/boat/lighting. Thanks guys.
I bought a couple more of these two-diode LED clearance lights to add some more lighting to the rear of my kayak trailer. They work nice and are easy to install in 3/4" holes that I drilled through a piece of aluminum angle. The trailer has orange clearance lights on the front sides, red clearance lights on the back sides, the stop/turn/parking lights on the back, three red clearance lights on the back, and a white LED license plate light. It's really lit up and very visible at night from the rear and sides. Thanks to etrailer.com for great products and services!
My wife and I like to kayak, but we don't like to deal with putting our kayaks on roof racks on the top of a car. So I bought a used Load-Rite trailer that was designed to hold one Jet Ski, and added a frame made of slotted angle and 2x6 lumber to hold the kayaks, and a cargo box from Tractor Supply to hold kayak seats, life jackets, towels, sun-protection clothing, and some spare gear (ropes etc), and bought all new LED lighting from etrailer.com. The paddles are too long for the cargo box so they have to go in the car! The kayaks are tied down to the trailer with several ropes front and rear, so there is a lot of safety factor in the design....I don't worry about the kayaks coming off the trailer! The entire rig works great....when we return from a kayak trip we just back the trailer in the barn and it's ready to go for our next trip. I put a 5" diameter wheel on the trailer just behind the hitch so I can push it around on flat level surfaces. See the pictures.
I’m really happy with these lights. Super bright and straight forward installation. 3/4 inch hole with a hole saw and insert the grommets and lights.
I have finally finished the install of the great products that I’ve purchased from Etrailer. Curt 24K 5th wheel hitch, the lube discs, the front receiver hitch tube, the Factory 7-way connector and 7 -way extension (I have 3 7-way plugs on my truck) and the countless number of LED lights. The service is amazing and the customer service I received was fabulous. I really like these folks as they were vary knowledgeable about what I was after and pointed me in the right direction to accomplish my end goal. Thanks to everyone at Etrailer. I couldn’t have done it all without you.
Great item at a great price. Purchased 4 clear with red (2-diodes) to place in my rear step bumper in place of back up sensors for my older truck used as clearance/running lamps.
Fitment was up to me being had to locate rubber grommets to adapt to these smaller 3/4" lights to the 1 1/8" bumper holes.
I would give these 5 stars but for some reason the black wire is the HOT, while any automotive electrical item I be ever worked on the BLACK was the ground! Opposite here and recommend testing them before you hook up like I did then had to reverse wires..
Silly mistake on my part but why is the black (+) and white (-) ???
Otherwise they're bright and add to my otherwise dark OEM tail lights for increased safety. Pic shown is during daylight!
Been on for a couple of years now and still haven't had a issue perfect lights
Great addition to the basic, rear brake lights of a camp trailer.
I added these LED RED to the brake/turn function, within the existing, small holes in the rear bumper--much more apparent when stopping/turning.
These sealed LED lights are very common on larger trucks and trailers now. Easy to install and very robust assembly...priced right!
They are low profile in the day, and very functional in the night with their brightness. I did not expect them to be this good. I wired them as marker lights for my rear fenders.
I installed these on my home built teardrop. Worked out very well. Total current draw is under 400 mA for all lights.
I actually purchased these lights to use as a side marker light on my Jeep Wranglers after installing after market fenders. Lights have worked fantastic up to this point
Added these lights on my motorcycle trailer, and they are perfect!
Great little running light puck! Easy to install and very bright at night and is even very visible in daylight. Only about an inch in diameter on the outside, you wouldn't think it was much larger from the amount of light they provide.
Product is spot on, fit finish and function. More importantly the whole ordering/delivery process worked to perfection. Our company was in a tight jam with one of our transport trailers and needed these lights pronto,
e-trailer came to our rescue and didn't even know it. That in itself proves that customer service is
e-trailers standard priority.
Very well built, sturdy and totally sealed against moisture. I installed these into the top of my Haulmark enclosed trailer to act as clearance lights. Installation was a breeze, I just drilled a 3/4" hole with a step bit, wired all five lights together and tied it into the running lights of the trailer's harness. I put the ground against the steel frame. I went a step further and put a bead of clear marine grade silicone around the light to ensure no moisture makes it inside the trailer despite these being a tight fit. As you can see from the pictures, installation is clean and they're very bright, both day and night! I put one on either end, 6" from the sides and the three middles ones are spaced 10" apart. Similar to the clearance lights on a truck, I didn't use a template, just winged it.
I have purchased lights from etrailer several times and the service and quality have been great. I have purchased lights for my truck and also have used there submersible lights for my boat trailer.
lights have been in service for over a year and still bright as the first day I installed them.
Shipping was slow, but I can't complain much considering it was free!
I chopped the fenders on my 2008 Jeep Wrangler, which involved removing the side marker lights. I installed a pair of these DOT approved lights to meet inspection requirements.
As for the lights, they are well-constructed and very bright. Installation was difficult; even after drilling and deburring a 11/16" hole, the grommet barely fit in. I had to put a small amount of grease on the light's lateral surfaces before the light would slide into the grommets.
Overall, I am very pleased with the product. Poison Spyder sells an inferior product at several times the price; I am glad I found these here!
I ordered these light to be used as accent light on a new lift table for my company. I needed low profile and fairly bright red light to be reflected off our off-white power coat. These little lights out preformed what we were hoping for. The only thing I don't like about them is the instructions say to drill a 11.16" hole. Assembly was WAY too tight at that dimension. So we stepped it up a fraction at a time and found that 17/64" (.73) and 3/4" (.75) were perfect. Even at 3/4" the grommet was snug and water tight. The light had to be squeezed into place but at 11/16" I felt like I was about to brake the light.
Overall I am super pleased with the lights. We added them to the Bill of Materials and we will be ordering them for these new carts.
groumet was missing from one light
Extremely happy with customer service and all products I have purchased from etrailer.
Awesome little light! Very bright! Fits snug in a 3/4" hole. These worked perfectly for my running light project on the air dam. Ordered these on a Sunday, they were at my door on Thursday. Excellent customer service Etrailer! (Side note, the lights behind the grill are 4" round, not the 3/4")
Great customer/sales representative, Michelle! She was awesome! She crossed referenced another number, not exactly a high volume or priced item. But she treated me like I was spending a million bucks. Also, she sent me multiple emails so I could track my package, receipt, and a thank you! All that for about a $10 order. I’ll never buy from anyone else. Thanks etrailer and Michelle.
Great product & wonderful service.
I needed a couple of small lights for a little trailer I am building to pull my grandsons behind my golf cart and these look to be a great product at a great price. Thanks again etrailer
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.