Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
1" Round. Waterproof mini trailer light functions as both a clearance light and a side marker light when properly mounted. Locking ring deters theft. Recessed mount with included gasket. 2-Wire pigtail with 0.18 male bullets. PC rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Optronics LED clearance and side marker Light. This is a small round trailer light that functions as both as a clearance light and a side marker light when properly mounted. It's going to feature a sonically sealed, waterproof housing and lens unit that is submersible. It's an LED light, so LEDs are going to make great replacements for incandescent lights, they last longer, they burn brighter, they're more efficient. You don't have to worry about replacing bulbs and you don't have to worry about brittle filaments. This light is going to contain an amber lens, that's going to be a polycarbonate lens and housing when it comes to the construction.
It is designed for a recessed mount installation. If we take a measurement of this area right here, that'll tell us the size of the hole we need at the mounting location. It looks like that's going to measure right around 3/4", so a 3/4" diameter hole is needed at the mounting location. It's going to come with an O ring, or a rubber washer there, to provide some cushion at the installation surface and on the opposite side of the installation surface, you would install the locking ring; this is included. That's going to help deter theft of the light. The ring simply secures the light inside of the mounting hole on the trailer. We're looking at a 2-wire design.
You going to have your black and white wires. The white wire is for ground, black wire is for power. They're going to have the 0.18 male bullets on the ends and its got the protective sleeve over the wiring. Now the male bullets, those can be cut off for hard wire applications. This light is Department of Transportation compliant.
It's a PC rated light. A few dimensions to go over with you real quick, starting with the overall diameter: That's going to give us a diameter of about 1" and then the overall depth, that's going to measure about 7/8" deep. We're going to go ahead and hook it up to power that way you can see what it looks like with some power running to it. We'll also be able to turn off our overhead lights, so you can see it in a low light setting. Now this light only contains one dired, so it's a single LED, but as you can see it's a nice bright light. The power draw at 12.8 volts is 0.082 amps and Optronics is going to put a lifetime warranty on the LED. That's going to do it for today's look at the Optronics LED clearance and side marker light..
Average Customer Rating: 4.0 out of 5 stars (1 Customer Reviews)
1" Round. Waterproof mini trailer light functions as both a clearance light and a side marker light when properly mounted. Locking ring deters theft. Recessed mount with included gasket. 2-Wire pigtail with 0.18 male bullets. PC rated.This product probably has enough depth to enable it to be mounted in vehicle grills. However, and this is a big however, these products are not packaged with the threaded fasteners necessary to actually mount them. You have to take the LED light to the hardware store and buy a threaded nut of the correct diameter and thread pitch in order to use them.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ara
4/27/2022
The Optronics Clearance Lights are functioning as intended and designed after a year of service on a Sheriffs Office patrol vehicle. Other brands of LED clearance lights have failed in this application, but the Optronics products are robust. When you order, be sure to ask for the keepers - necessary for installation. I change my rating to FIVE STARS.