To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (154 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Very pleased with the purchase of the e trailer hitch, the instructions were right on, everything lined up and installed as I expected.
Great customer service. Great follow up. However, this does not fit a 2012 Volvo S60, whatever eTrailer says. To get the back bumper panel on the car required significant “coaxing” of the bumper bar. The coaxing involved ratchet straps, mallets, a massive steel Indian club. All to say that without bending the impact bar a bit, the bumper panel did not fit.
I’d recommend getting anything other than this trailer hitch if you have a 2012 Volvo S60 as the effort to get it on was not worth it.
Bought this as a gift for my daughter's 2017 V60 Cross Country. Ordered it last week, here on Monday. Delivery was excellent!
The instructions were thorough. The paper work included the original manufacturing traveler with the QA control marks. Love this!
It helped that I backed the car up on a ramps. It involved less bending and more visibility to the underside of the rear of the vehicle. The clearance to remove the screws in the wheel well was tight. I put a photo of the 1/4" ratchet with the T-25 bit.
Putting in the spacers in the bumper/hitch stackup required some thought and balancing. I started with the bottom two bolts, finger-threaded. That left enough play in the upper four bolts to bring it together.
Cutting the bumper for hitch clearance caused me the most anxiety. It's my daughter's baby and I didn't want to mess this up. I used a rotary tool and a utility knife for trimming and it came out fine. I cut a little less than the instructions said at first, just because you can't put back what you cut away. In the end, the fit was perfect.
The total project took about three hours, including supper. I'm very happy with the product and the on-line help available to finish this job. Let's see what my daughter thinks tomorrow... (grin).
Went in fairly easy. I did it alone. The only part where two people might be needed is installation. The hitch is heavy, the bumper rail that fits over it is not. So you are trying to align the holes in both with the threaded holes, and it is bit tricky. The packing was very good for shipping. The insructions say to use the included washers and bolts only for installations with the raised areas, but I assessed the length of the bolts and chose to use them and the washers. In particular, the tow hook mount is thick, and at least in those two locations I would use the longer bolts regardless. My hitch has about a 1/8" offset from the tube with the receiver to the rest of the hitch - a manufacturing anomaly. Otherwise the fit and finish are perfect. One video shows prying the bumper cover end from the wheel trim, but mine was like the video where the advice is just pull straight out. I had no problem the bumper cover latches - just pull each side end straight out, and work your way along each tailight, pulling outward. I have parking sensora, so I used plastic sawhorses to support the cover while dealing with the connector. It is a bit stubborn. There is a 1/4" wide area with two ridges - which the the "tab" that you press in to release the latch. Take your time it will come apart. The threads of the mounting bolts are suprisingly finicky to get started, which would be another reason two people might make installation easier.
Installed on a 2013 Volvo XC70. Used the video installation video found on webpage of product to install the hitch as well as going over the instructions.
Product arrived undamaged in proper secure shipping box. Came with bolts washers and spacers. The spacers were not mentioned in the video install guide, the paper instructions explain them, but it would be more helpful if the install video addressed them. I figured out I did not need them on my model (I hope), after reading the instructions.
Removal of bumper: My bumper had lights/wiring connected. I could not for the life of me disconnect the wiring, so it just moved it to the side and set it up on supports to not cause tension on wiring that connects bumper lights. Was able to install hitch without issue.
Instructions were a little confusing on location to cut out of under bumper for hitch clearance. My cut was a little wide on one side, tried to show in picture looking up at hitch.
Having the correct tools will greatly help. I actually had to cut a portion of my torx screwdriver handle, so I could remove one of the torx screws holding on the wheel fender well. It was that or remove the tire. A small or angled torx screwdriver would be best.
Overall a easy install for a novice. Took me less than 3 hrs. Having a 2nd set of hands helps when it comes to lifting the hitch and bumper piece up and starting a couple bolts. I installed this by myself.
Information in the online "catalog" provided complete info needed to make a decision. Hitch and accompanying wiring harness were received promptly, along with easy-to-follow instructions for installation. Entire installation - hitch and trailer light wiring - was completed in under 2 hours. No glitches. This is the 2nd time I have used etrailer.com. They have their program down pat, from timely acknowledgement of the order, to shipping, to quality products.
Just picked up my 2008 Volvo V70 from my mechanic who installed the trailer hitch & it looks great! Everything is concealed except the receiver & I couldn't be happier with it! Even my mechanic was impressed with it! I purchased it along with a Thule bike rack so that I could take my bike with me on an upcoming trip. The ordering process was easy & I talked to a live person so that any questions I had were answered. The hitch, locking pin & bike rack arrived very quickly. Would highly recommend ordering from etrailer!
The product came quickly and was packaged well to avoid damage. I was surprised how strong it was. Installation was pretty easy, I wouldn’t say a 10 in difficulty like the website. More like a 6. I was concerned it wouldn’t fit my car which is a special model called R Design, but it fit perfectly. The most difficult part was getting both sides of the bumper to align, the spacers push out the bumper pretty far so the cover is a very tight fit., think wife trying to fit into wedding dress 15 years later tight. The bottom I wasn’t able to put screws back in so I just used zip ties. I may take a grinder to trim Back the spacers a 1/4 inch to better fit without zip ties. I would very much recommend. It looks good and is well hidden. Installation hints: put tape on the rear fender to avoid scratching while putting bumper back on. Also do a search of online videos to see how to remove Bumper cover, that easily saved me 40 minutes.
Installed on a 2008 Volvo XC70
This really couldn't have been any more straight forward to install. I hit a snag with a stripped bolt in a hard to reach place (13mm bolt connecting to the tow hook assembly on the right side), but once I resolved that issue by moving some additional components out of the way, it was smooth sailing. You don't need any specialized tools, and I was able to do the job from start to finish with T20 and T25 torques bits, and 10mm and 13mm socket wrenches. Took about 1.5 hours by myself.
TIP: A floor jack makes an excellent set of extra hands for holding the hitch in place when bolting it in by yourself!
etrailers has a great set of installation videos [online] that were extremely easy to follow. I used this one for my 2008 Volvo xc70.
I installed this today on a 2016 XC70. The video really spells it all out extremely well. I would add a couple of points to watch out for.
1) the 10mm nuts under the bumper fascia are plastic. Mine were finger tight. When you reattach them, use a wrench and not a power driver or you risk stripping and splitting the plastic.
2) I have parking sensors and corner marker lights in the bumper fascia. You’ll need to disconnect that as you remove the fascia. Have a helper hold up the fascia while you do this, or support the fascia on a box or something else.
3) I did the job solo, with the car on the ground. The step where you lift the hitch and the bumper onto the car and attach it is probably best done with a helper. However, I was able to support the hitch on a step stool at the correct height to attach the bolts into the car.
Next up, doing the wiring. I use this hitch to attach a Yakima 4-bike rack with the Lampost lighting device (this is no longer available from Yakima).
The hitch was easy to install on our 2016 Volvo V60 and took about an hour and a half. A couple things that will help make the install easier. Have something to lay your bumper on. After you remove the screws and connectors at the top of bumper shroud be prepare to pull hard starting at the wheel wells and the cover should come free easily. When putting it back I suggest you start at the top near the car entry and work down to the wheel wells it willl be easier to get things aligned for the screws in the wheel well. Make sure you have all the right tools. We had to make a slight cut in both our muffler heat shield and shroud underneath the bumper where the hitch will hang. Not hard to cut just take your time and make sure the cuts are aligned. It saved us over $400-$500 doing ourselves and purchasing the hitch on etrailer.
I should have bought from etrailer sooner!! I’ve been reluctant to add a receiver hitch to my Volvo wagon due to aesthetics. I’ve always had one on my Ford trucks - but hey this is my kinda sporty grocery getter wagon. Well I’m getting older and would prefer a bike rack below shoulder level. That lead me to want a receiver hitch and my daughter’s fiancé used etrailer to find a hitch, so he sent me a link to the web site. Options, prices, videos were over the top and I ordered one on my first visit. It arrived today and I’m completely satisfied with design and workmanship. Here’s a photo of the install without the bumper cover reinstalled. Couldn’t have done it without the videos. Once the bumper cover is back on I won’t even notice the addition.
I'd like to register a complaint. Typically, for car projects in the garage, I like to allocate an entire afternoon with just me, my tools, and plenty of pilsner beers to complete the task.
This install was so straightforward and easy, thanks to the instructions and online videos, that I completed the project in only 2.5 pilsners. This allowed me too much time to work on my wife's assigned projects for the rest of the afternoon.
But seriously... This a real-deal, top quality product. I've towed lots of stuff with it with no problems. And it's not obtrusive-looking on the car. Good stuff. Highly recommend!
This is the fourth different hitch that I have purchased from etrailer.com, and once again... a smooth and easy installation.
From start to finish, etrailer.com does it right. The Draw-Tite hitch and all components were packaged safely and carefully. No damage in transit.
The instructions were thorough, and the online videos helped to clarify the details.
The finished project is quite satisfactory. This do-it-yourself kit looks like a professional, factory installation!
I installed this receiver hitch on a 2016 Volvo V60 Cross Country T5. I watched the instructional videos and made my installation take no time at all. I only reverted to the written instructions for the amount of torque required on the bolts. I was skeptical about cutting the trim to fit the hitch but I think it looks very professional and at the right heath for my bike carrier. Thank you.
Hitch fit like a hand in a glove. Well finished, speedy delivery, with appropriate hardware which I didn't need. Video implied easy, straight forward bumper cover removal, but was the most difficult to execute, Volvo's to blame for that one.
Finished product is of sight except for the receiver.
I think the estimate of 2 hours to install is a good one. In fact, most of the issues I had was while trying to get the body panels back on. One tip I would make is that you have a vinyl siding tool handy. I had one and it made it easier to pop the panels back on.
Regarding the hitch, it was a piece of cake. Instructions were clear (watched the video online first) and components are excellent. I am very pleased with the installation and finish. I think my friends and relatives are now lining up to have me help them.
Great hitch and super easy to install on Volvo XC70. Start to finish the install was a two hour job for one person...only one step requires two people. The install video was super informative and easy to follow.
The hitch came quickly and fit perfectl y.
I'm sure the design and build of this product are excellent. But the packaging and shipping leaves much to be desired. The hitch came rattling around a large box, breaking through the sides, crushing the other products inside, and chipping the paint
Jason
1/30/2023
The hitch and wiring from etrailer are holding up very well. I towed a 5 x 8 U-haul cargo trailer about a thousand miles with zero issues. The finish is holding up including in the spots where I touched up the factory paint job
When I read it was a 10 of 10 for difficulty I was a bit worried. This install was a breeze. My 15 year old helped me and we were done in just over an hour. On the S60 we did not even need to cut the bumper cover. Cannot even tell it's installed unless you are looking for it.
everything received was perfect and installation video was huge help! It took me just under two hours to complete install and I could not be happier! Thanks... You folks are the best!!!
Has worked well and no installation issues on my 2015 Volvo XC70
As advertised, easy install. Nice to have 2 people for bumper removal and install to make sure you don't scratch any paint on the sides. Only issue I had was outer ring on 2" trailer hitch entry area was welded a little off center. Needed to file entry area to get hitch to insert. Have used the hitch several times. Would give a rating of 5 stars if I wouldn't have had the file issue.
very easy to install, was able to connect to an unused port of power in the rear fuse box.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Steve
6/9/2021
After a year, still stout! My daughter loves it!