To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.6 out of 5 stars (119 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.I think this hitch should be designed with 2 pre drilled holes for you to be able to mount your wiring....if you purchase the wiring harness and the bracket you have no way to mount it except for a few zip ties and one crummy self tapping screw that will more then likely break....great job curt....I hate your product... it was not designed for an easy install of your very own wiring....and yes I know that you can buy the no drill one but I would prefer to just have pre drilled holes....make your product designed for your brackets if your going to make them as well.
I installed this myself. The Video on YouTube was spot on. My recommendation to anyone installing on a travers is wear gloves when you are working around the muffler heat shields. Got me twice before I gloved up. My bad. But a very good product from etrailer. Ordered on a Sunday and had it on Wednesday.
The back hole was not aligned to my cars hole by .5 to .75”. I had to dremel out my cars hole longer for the bolt to go through. That was a pain.
But otherwise, seemed very good quality
Relatively easy to install, instruction video did not mention it but to fish the bolt through the rear hole its so easy if you shine a flashlight through the hole the fish wire goes through then you can see the hole to put the wire through. Good heavy duty quality hitch..
great product great price easy instructions for installation
I chose this hitch over the cheaper Draw-Tite hitch for my 2019 Buick Enclave because it's made in the US and because of the Curt reputation. However, the Draw-Tite hitch comes with a mounting tab for the electrical connector; had I realized that when I ordered I probably would have gone with the Draw-Tite hitch. My installation used the Tekonsha T-One harness (PK12711U), the Pollak 7-pole mounting bracket (Mounting Bracket) and the short no-drill mount (18140).
When installing this hitch, I recommend having the following tools handy in addition to standard hand tools: An impact wrench, a die grinder with a carbide burr, and a metal scribe. The front mounting bolts will tend to spin if you try to tighten their nuts by hand, but an impact wrench makes it easy to tighen (and if necessary, loosen) the nuts. The scribe and die grinder will be needed if your hitch doesn't quite line up with the holes in the vehicle frame.
The installation instructions are bit misleading. They say to install all the mounting bolts with the exhaust hangers in place, but it is nearly impossible to install the front mounting bolts with the exhaust in place. Instead, leave the exhaust hangers off and install all the bolts. Then remove the exhaust hanger bolts and re-install them with the hangers in place.
The holes for the front mounting bolts didn't line up with the factory holes on my 2019 Enclave. What I had to do was to tighten the rear mounting bolts and then scribe the locations of the factory holes on the hitch. I then removed the hitch and enlarged the holes using a die grinder with a carbide burr. The hitch seems to be mild steel and is easily machined with a die grinder. I've included a picture of the hitch after scribing the hole locations and then after enlarging the holes.
I recommend using a flat trailer harness if you don't need the 7-way harness. There's not a lot of room inside the fascia close-out for the 7-way connector. I was able to fit it all in by reversing the Pollak bracket on the short mount. I've included a picture of how I assembled the harness connector, bracket and mount. It was also necessary to bend the bracket and rotate the connector 90 degrees to get everything to fit inside the fascia close-out.
Exactly as advertised. Used Etrailer's video to install. Very satisfied
Install was straight forward, however, there was a major fitment issue. First, the two tongues that are supposed to slide into the slots on the car were too narrow. I had to fight to get them to even go in. Then, when I went to fish the lag bolts that lock that tongue part down, the holes did not line up. I was only able to install and tighten one bolt on each tongue. Serious fitment issues.
That said, I was able to install (not correctly) and it will get the job done for what I need. I am not pulling a trailer. Just using a hitch mounted bike rack.
I really loved the look of the hitch and its construction . But was not impressed with trying to make fine alterations to make it work. for the price the fit should have been better. meatal hose clamp and zip ties for mounting wiring. Not impressed. the installation video is what sold me.
This is my second Curt hitch install. Good price. Good instructions. Excellent fit. Very happy with this purchase!
Quality products
Exact fit
Heavy duty, seems to have a very heavy black finish
Welds look good fits great. Comes with all hardware needed to install. Only issue was the back two bolts. You have to modify receiver or vehicle to make fit but it does say that in the instructions. Package arrived on time.
I had to make a couple adjustments to get all the bolts to line up, I wasn’t expecting that Curt hitches always fit perfectly. I guess everyone can have a off day.
This is a great product, very easy to install after watching the video provided by e-trailer. We did it step by step as in the video, took us less then 2 hours.
Great hitch at a great price. Installation instructions were clear and precise. I wouldn't recommend trying to install it yourself if you aren't mechanically inclined or car savvy.
Fit just as described.. very easy to install with instructional videos from etrailer.com
Fit perfectly
Delivery was fast and product was corre ct.
Another great price, excellent service, fast delivery etrailer order completed. A few points and words to the wise:
You will likely need to egg-out at least one mounting hole on the hitch, GM is installing one or more bumper studs crooked for some reason (2021 Traverse had one stud at a 10 degree angle while the other three were straight as an arrow). It's not a problem if you have a die grinder with a carbide burr, takes literally two minutes to make it work. The hitch is made correctly, the car is made wrong. Use caution while installing hardware in the area of the exhaust heat shields. This material is as sharp as a razor, expect to get cut and scraped if working in short sleeves. I suggest long sleeved shirt or Kevlar sleeve to avoid injury (again, an issue with the car, not the hitch). Third point- There is a problem with some Curt hardware, this install I had one of the 1/2-13 nuts start to strip, I had to use locally obtained nut to complete the install. This is the second Curt hitch install where I have had problems with the hardware fatiguing well before the torque value stated in the instructions.Tighten in stages and STOP if it suddenly takes alot less effort to tighten (not stripping out) Cheap China hardware on a USA hitch?
So easy to install, the hitch was a perfect fit for the 2020 Chevrolet Traverse. the videos were very detailed. Tips for the DIY out there. do not tighten bolts and nuts until you have all of them in place, I actually did and then the bolts for the muffler hanger did not fit, so I had to loosen the bolts and install all of them in place. I installed the bolts for the muffler hanger without installing the hanger. then I tightened the nuts between the muffler and the bottom of the vehicle. then I remove the bolts for the hanger and installed the hanger.
Package very good.
Trailer hitch was broken thru the packaging and left outside in the rain by delivery company. I have not opened it yet to determine if the hardware is still in the box. The package was also left outside our garage door rather than placing it on the porch. By sheer luck I did not back over it coming out of the garage
Excellent product
Always quality and detailed instructions
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Charles
10/24/2022
While the Traverse is not our primary trailer hauler, the hitch has worked perfectly with small single axle trailers and has been used on a few occasions to put our boat in and out of the lake. Due to the location of the hitch, the Traverse needs a drawbar with most small trailers. The adjustable type is what we use. Works great. Still amazed that the Chevy dealer wanted $700 to install a hitch. Its a simple task and can be done in a couple hours on a Saturday.