Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(815 reviews)
Price: $103.66
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 13333
Our Price: $103.66
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (815)
- Q & A (0)
- Photos
CURT Trailer Hitch - 13333
- Class III
- 2 Inch Hitch
- 6000 lbs GTW
- No Cross Tube
- CURT
- 600 lbs TW
- 10000 lbs WD GTW
- 1000 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 6,000 lbs
- Maximum GTW when used with weight distribution: 10,000 lbs
- Maximum tongue weight: 600 lbs
- Maximum TW when used with weight distribution: 1,000 lbs
- Maximum gross trailer weight: 6,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13333 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2010 - 2018 Ram 1500 without factory hitch
- 2019 - 2024 Ram 1500 Classic without factory hitch
- 2010 - 2013 Ram 2500 without factory hitch
- 2010 - 2013 Ram 3500 Pickup without factory hitch
- 2004 - 2014 Dodge Ram Pickup 1500 - without factory hitch
- 2003 - 2003 Dodge Ram Pickup 1500 - without factory hitch - built After 11/1/02
- 2003 - 2013 Dodge Ram Pickup 2500 and 3500 - without factory hitch
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Defective
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13333
Average Customer Rating: 4.9 out of 5 stars (815 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Steven 05/01/2024
2016 Ram 1500
Product works great. Install medium difficulty for novice. Install video made it doable.
by: Clifford05/03/2024
Love it... Very well made and it did not take long to install as I had the tools needed... the fish wire was so easy... Again, Loved it!!! installed so Quick!!!
by: Chris05/05/2024
2023 Ram 1500 Classic
Went on easy torqued everything down as specified looks great only problem is the hex bolt sticks up to far to put the bumper ball hole cover back on
by: Michael D05/01/2018
2015 Dodge Ram Pickup
I ordered this for a 2003 Dodge Ram 1500 I recently acquired. Very well made! It came complete with all hardware and instructions. I had no problem following the instructions. It took longer to get ready to install the hitch than it did to install it; just about 15 minutes. I also ordered wiring kit C57186 which was perfect for my application. I'll be towing a Jay Feather hybrid with Tekonsha Prodigy RF wireless brake controller and this worked out perfectly. Thanks to Etrailer for making this so easy!
by: Phil 05/03/2024
2022 Ram 1500 Classic
Installation went smoothly. Should work for what we bought it for.
by: Randy 03/18/2024
2018 Ram 1500
Built sturdy, looks great. Watched installation video, installed in about 30 minutes. Helps to have 2 people.
by: Frank M. III10/13/2016
2015 Dodge Ram Pickup
Went on without a "hitch"!
But seriously, the hitch went on without a problem. The first one I ordered was welded completely crooked. I was p*ssed! I took pictures and sent them off to customer service. There is no doubt about etrailer's Customer Service Team. They are second to none. My replacement hitch was on its way to me before I even had the crooked one in the mail. The hitch, bolts, nuts and those wires that allow you to pull the bolts and retainer plates through the frame, all quality parts and easily went on. They have instructions and a great video of how to install it on my 2015 Ram 1500. Thank You etrailer for a smooth and pleasant transaction.
by: Anonymous 10/30/2023
Good fit on the truck and wasn’t hard to install, it comes with everything you need to install as well. The paint is holding up really good no chipping or rusting, definitely would recommend this hitch receiver if it fits for your application.
by: Christopher07/09/2023
2005 Dodge Ram Pickup
2005 Dodge 1500 V6. 17ft flat trailer. 10ft Dump trailer. I haul no more then 5,000 to 6,000 pounds.
So far the trailer hitch and the receiver has held up well for hauling my two trailers. It installed rather easily with the fishing wire being the only challenge. The only issues is getting the 3/4" hardware to XXX lb-ft. I broke one socket and I don't have a torque wrench that goes that high. Nor could I find a local truck mechanic who did. SO I tightened the hell out of it and hope for the best.
by: Mitch V.09/22/2015
2015 Dodge Ram Pickup
Fast shipping. Very well built and easy to install. Had the new hitch on in less than 15 minutes on my Dodge Ram 1500 ST and it looks great.
Mitch V.
9/21/2016
After a year and towing a boat this hitch is still like new. Not a single problem with it coming loose or showing any sign of wear. Am as happy today as I was the day I installed it.
by: Thomas 02/02/2024
2004 Dodge Ram Pickup
This hitch is high quality and built to last. I think start to finish it took me 20 minutes to install. I am glad I found this and got it so quickly!
by: Jon. A.. 03/06/2014
2013 Dodge Ram Pickup
Awesome. . Perfect fit for my 2013 Ram..Easy to install , especially with all the hardware that's included. I had read previous reviews and noticed a 1/2 inch hex key was needed so I purchased that before the hitch arrived that way I was ready to install. From the time I opened box , dropped spare tire,install and tighten the hitch to jacking back up the spare and being tow ready in 30 min. Thanks etrailer for a great product at a great price.. I am a satisfied customer.
by: Jeff F.06/24/2013
2012 Jeep Liberty
I received a quote from a local truck dealer to install this for $220 and stated it would take a "couple of hours!"
I watched the video on-line and decided to order the part. It arrived in a couple of days and I had it installed in 22 mintues! (4 - 6 mins were to lower/raise the spare tire!)
I used the hitch this past weekend to haul my bass boat!
Ordering a reciever hitch for my wife's Jeep Liberty now (Local dealer quote was $550)
NOTE: Make sure you have a 1/2" hex socket for the bumper bolt.
by: Steven T. 07/23/2015
2015 Ram 1500
Shipped fast. Etrailer support was excellent, there was a concern with my order and it didn't ship on time so they refunded my extra payment for 2 day shipping and still shipped it 2 day. Installation was easy, I didn't even drop the spare all the way to get to the bolt holes through the rear cross bar. Fitment with the spare and in hitch in place is tight. The top bolt barely handled the required torque. Installation was a breeze. Can't wait to use it this weekend.
by: John 12/23/2022
Great customer service. Fast order processing even during holiday mayhem!
John
12/24/2023
The hitch receiver is working well. No problems. Was a good purchase.
by: Norman12/03/2019
This product is amazing. Extremely well made and comes with everything you need for an easy installation. The video instructions on there web site are spot on and very simple to follow. I could not be happier with this product. Lowering the spare was the most difficult part of the install but that is Dodges fault for making their spare tire system a joke.
I give this product my highest recommendation!
The entire ordering process could not have been easy and faster. Arrived exactly as advertised I was shocked as to how well made it really is. This is a beast of a hitch. This hitch is far superior to the Mopar hitch the dealer will charge you $275.00 for or $338.00 installed. You won’t be disappointed with this hitch.
by: Granny L03/30/2017
After reading up on your hitch and it's installation, I was convinced I could do this myself ~ except for not being able to tighten things adequately. [I'm all of 71 yrs young.] Owner of the truck, hubs, Papa Gene at 86 yrs young, has no business groveling on the hard ground on his bad back to do the job ! As he figured [incorrectly] that the spare would have to come off from the undercarriage, he elected to have a more able, [disabled] neighbor do the job. As your instructions indicated, the job took all of 30 minutes, and no, the spare stayed in place. Hubs is ready now, to haul cedar logs to be milled for return so that he may build more furniture!
by: Brandon S02/21/2015
Great! Easy installation and hauled my first load on it today! Feat product!
Brandon S.
3/4/2016
It is great! Hauling is no problem using my 14ft trailer. Excellent product.
by: Angel11/24/2016
2003 Dodge Ram Pickup
It was the best and easiest solution for my need, pulled my horse trailer around like nothing and you do not need to be a handle man or mechanic to do this, very easy steps.
by: Joseph Newcomb02/12/2018
2015 Dodge Ram Pickup
Installed on my 2015 Dodge Ram 1500. I think I spent more time trying to find the 1/2 hex and lowering the spare to give me some room than I did installing the receiver. Ordered on a Sunday, received on Tuesday. Fantastic product, good price, easy installation, I would highly recommend.
by: Will 03/27/2024
The order arrived in great condition and a day early! I highly recommend this company.
by: heatmandan,memphis10/18/2016
2011 Dodge Ram Pickup
Was looking for a receiver to fit my 2011 Ram crew cab, E-Trailer had one for a decent price, with a flush under bumper model. Just as advertised, it fit perfect. Very easy to install.(15-20 mins.) Made a great choice in doing business with E-trailer. Delivery was sooner than expected, and the price was good for me. Thanks E-Trailer
by: Adam05/04/2020
Heavy duty and sturdy. Installed this on my 2019 Ram 1500 Classic Warlock edition.
Came with all the special wires to install the back up mounting plates! So easy to install that it took me about 20 minutes!
by: Tony 10/05/2023
Built well, easy to follow instructions and easy installation. I may have spent half an hour.
by: John W06/04/2020
2019 RAM 1500 Classic
Very fast service, I had my hitch in just 3 days.
Very easy install, took 15 minutes after dropping the spare tire even with hand tools and laying under it in the driveway.
Looks just as good as OEM, if not better.
25
815
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Ball Mount Compatible with Curt # 13333 Hitch on 2011 Dodge RamWe do not currently offer a package deal that includes the hitch, ball mount and ball, but we do offer a ball mount and ball kit, part # EBMK4. The kit includes a ball mount, and a Convert-A-Ball interchangeable ball system with a 1-7/8 and a 2 inch trailer ball, pin and clip and storage bag. When this kit is combined with the Curt # 13333 hitch you referenced, you'll be set with an economical towing system.
view full answer... - Need Hardware for Curt 13333 Hitch for My 2017 Ram 1500We have the replacement hardware kits available with part # RHK. When you get to the web page you will need to enter # 13333 in for the Hitch Item Number. This will get you the correct hardware replacement kit for your hitch.
view full answer... - What Size Hex Bit do I Need for 3/4 Flat Head Socket Bolt?When installing the Curt Trailer Hitch Receiver part # 13333 you will use a half inch hex bit or allen. Generally in this case we use an impact type 1/2" hex bit on a large torque wrench. This tend to let us get tot he high torque spec of 320 ft./lbs. required. A 3/4" or 19mm is also required as a heads up.
view full answer... - Will Curt Trailer Hitch, # 13333, Fit 2010 Dodge Ram Crew Cab Sport With Factory Dual MufflersI called the supplier (Curt) and they said the Curt Trailer Hitch, # 13333, will fit your 2010 Dodge Ram 1500 Crew Cab Sport with the factory dual mufflers if it does not have the factory installed hitch. The Curt hitch installs where the factory hitch would be located, so it does not work with the factory hitch. You will need to remove the existing trailer ball hole cap on the bumper because the hitch will attach to the bumper and bumper support with a bolt through that ball hole on the...
view full answer... - Wiring Harness and Hitch Receiver Recommendation for 2006 Dodge Ram 1500In order to get your 2006 Dodge Ram 1500 Pickup ready to tow your travel trailer we will start with a hitch receiver. I recommend going with the Curt Class III Receiver Hitch, # 13333. This hitch has a 6,000 pound towing capacity and does not require any drilling for installation. For a ball mount for your hitch, check out kit # EBMK4. This kit works with the Class III hitch and includes ball mount, 1-7/8" ball, 2" ball, pin, clip, and a bag to store it all. Although installing a hitch...
view full answer... - Class V Trailer Hitch Recommendation for a 2013 Ram 1500The hitches we carry for the 2013 Ram 1500 are not also fits for a 2010 Ram 2500/3500. So for your 2013 Ram you would want the Draw Tite Hitch part # 41948 as it is a Class V hitch confirmed to fit.
view full answer... - Trailer Hitch, Wiring and Towing Capacity of 2005 Dodge Ram 1500I took a look at the owner's manual for a 2005 Dodge Ram 1500, and it stated that with at least a Class III hitch such as the Curt Trailer Hitch Receiver # 13333 the truck was capable of towing up to 5,000 lbs. I have added a link to a video install of this hitch on a Ram for you to check out. Additionally, if your '05 Ram 1500 does not have a factory connector to power your trailer's lights you can add one with the Tail Light Converter Hardwire Kit w/ 4-Pole Connector # 119178KIT.
view full answer... - Trailer Hitch, Ball Mount, Ball, and Trailer Wiring Recommendations for a 2008 Dodge Ram V6For your 2008 Dodge Ram, the Curt Trailer Hitch, # 13333, that you have referenced would be a good choice. This hitch mounts to the bumper support beam and the bumper. It has a gross trailer weight capacity of 6,000 pounds and a tongue weight capacity of 600 pounds. I have included a link to the installation instructions for reference. To complete your towing set up, the recommended ball mount is # 2753 with pin and clip # PC3. You can use ball # 19260 (1-7/8 inch diameter), # 19247 (2...
view full answer... - Recommendation for a Trailer Hitch that Bolts to Bumper Support on a 2009 Dodge Ram 1500You are correct, your 2009 Dodge Ram 1500 does have a bumper support at the back that attaches to each frame rail with a support in the center that rests under the step bumper so you can place a hitch ball. The Curt Trailer Hitch, # 13333, that you have referenced attaches to the bumper support and uses the ball hole as an attachment point also, so it is compatible with your truck. The hitch can be used with weight distribution. I have included a link to the installation details for the...
view full answer... - Recommended Trailer Hitch and Weight Distribution System for 2004 Dodge Ram 1500The Curt Trailer Hitch Receiver # 13333 referenced in your question is confirmed to fit your 2004 Dodge Ram 1500 as long as you replace what you have with the standard OEM bumper. The Curt hitch is going to attach to the truck's factory bumper support that you mentioned with the included hardware. I have attached an image from the instructions so you can get a clearer picture of this. This hitch does feature a base towing capacity of 6,000 pounds but this is increased to 10,000 pounds...
view full answer...
- Will Curt Trailer Hitch 13333 Fit a 2018 Ram 1500?Yes it will! I can confirm for you that the Curt Trailer Hitch # 13333 WILL fit a 2018 Ram 1500 so long as your truck does not have a factory hitch. I have also added a photo for you showing how this hitch looks when installed on an '18 Ram. It's easy to see how this might be confusing but technically there is no such thing as a 2018 Dodge Ram; in 2010 Ram trucks became its own brand, separate from Dodge.
view full answer...
- Trailer Hitch for a 2003 Dodge Ram Built in October of 2002If your truck was made in October of 2002, then you will need to look at the hitches for that build date, see link. You can use # 13326 as long as the truck does not already have the factory hitch. I have included links to the instructions and a link to a video showing a typical installation for you. I also recommend etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set, a hitch pin with clip, and a storage bag. For trailer wiring, use # 119178KIT. I have...
view full answer... - How Does Curt Trailer Hitch # 13333 Attach to a 2003 Dodge Ram 1500 Quad CabThe Curt Trailer Hitch, # 13333, for your 2003 Dodge Ram 1500, bolts to the bumper support arm behind the bumper. It requires the removal of the trailer ball hole cap in the center of the bumper. I have included a link to the installation instructions for this hitch that shows pictures and explains the installation steps in detail. Since the bumper and support arm are attached to the frame, the capacity could very well be 500/5,000. The Curt Trailer Hitch attaches in much the same way...
view full answer... - Correct Curt Trailer Hitch for a 2003 Dodge Ram 1500Yes, both the Curt trailer hitches you will fit your 2003 Dodge Ram 1500 regardless of the bed size. The determining factor has more to do with the date that your truck was built: - Curt Hitch # 13326 (models built before 11/01/02) - Curt Hitch # 13333 (models built after 11/01/02)
view full answer... - Compatibility of Curt Class IV with Spare Tire of 2013 Ram 1500 STThe rearmost frame cross member or bumper beam of your Ram is essentially the OEM hitch minus the receiver opening. The OEM hitch can be completed so to speak using the Curt # 13333 which would provide a capacity of 6,000 lb gross towing/ 600 lb tongue weight. In order to achieve a higher tongue weight capacity (10,000 GTW/1,00TW), you would need to use the Curt Class IV # 14374 that uses the frame members for its two forward-most attachment points and the bumper beam for its rear attachment...
view full answer... - What Size Bolts Come with Trailer Hitch # 13333The trailer hitch part # 13333 that you referenced is a confirmed fit for your 2009 Dodge Ram 1500 and comes with the needed carriage bolts which are 1/2-13 x 1 1/2.
view full answer... - Hitch Recommendation for a 2014 Ram 1500That depends on a few things. First you need to consider the capacity of the Curt Hitch part # 13333 that you are interested in. Without weight distribution this hitch has a 600 lb tongue weight capacity and a 6,000 lb total trailer weight capacity. If you know that the trailer you plan to tow when you move will weigh less than that when fully loaded then this hitch would be adequate. If you think you would need more capacity then the # 14374 would be a better choice since it has 1,000...
view full answer... - Do You Recommend the Curt 13333 or 13374 Hitch for a 2020 Ram 1500 ClassicFor your 2020 Ram 1500 Classic, I recommend the Curt Trailer Hitch Receiver # 13333. The reason I recommend this hitch over the Curt Trailer Hitch Receiver # 13374 is because of the installation process and it being the more economical option. Both the Curt Trailer Hitch Receiver # 13333 and the Curt Trailer Hitch Receiver # 13374 will provide you with a maximum gross trailer weight capacity of 6,000 lbs. and a maximum tongue weight capacity of 600 lbs. So you are not sacrificing any weight...
view full answer... - Installing Curt Class III Trailer Hitch # 13333 on 2008 Dodge Ram PickupThe socket cap screw that is included with the Curt Trailer Hitch Receiver # 13333 referenced in your question will go down through the bumper and thread directly into the hitch. You will simply tighten this screw into the hitch and torque to the specifications listed in the instruction manual. A nut is not needed for this screw. This Class III trailer hitch is confirmed to fit the 2008 Dodge Ram Pickup 1500, 2500 and 3500 without factory hitch. It has a 2 inch receiver opening with a...
view full answer... - Needing a Trailer Hitch for a 2007 Dodge Ram 1500 Quad Cab TruckWe have a hitch that will mount to your 2007 Dodge Ram 1500 truck. I recommend the Curt Class III Trailer Hitch, # 13333. This hitch has the 2 inch receiver opening and is designed to fit your Ram truck using a bolt-on design. No welding is required. You will need the # ETBC7 kit to install the 7-way connecter to your Ram. You will mount the kit at the rear of the vehicle and connect your 4-pole flat connecter to the 7-way included in the kit. The kit also includes all the wiring, electrical...
view full answer... - Recommended Trailer Hitch Receiver for 2010 Dodge Ram 1500Curt Manufacturing offers a few different high quality, made in America hitches for your 2010 Dodge Ram 1500. The right hitch for you will depend on what you'll be towing and how much it weighs. If a 6000 lb towing/ 600 lb tongue weight (maximum amount of weight that can safely be suspended from the hitch) will work for you, you can't go wrong with the Curt Class III hitch, part # 13333. For a higher capacity, 10000 lbs towing/1000 lbs tongue weight, go with the Curt Class IV, part #...
view full answer... - Recommended Hitch Receiver Installation or Replacement for 2011 Ram 1500The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13333 is the hitch you have as I looked it up from your email address. There is not a spacer needed and this hitch is rated for 1000 lbs tongue weight when using weight distribution. It sounds like you either have too heavy a trailer for this hitch or you need to re-torque the bolts on your hitch to spec. I've attached the installation details as well as a video to assist. If you determine you want a stronger hitch without...
view full answer... - Trailer Hitch Receiver for 2013 Ram 1500 to Tow 8,200 Pound TrailerThe trailer hitch receivers that install in the same fashion as the Curt # 13333 on your 2013 Ram 1500 do not have the weight capacity you're looking for unless you use a weight distribution hitch. However, we do have other receivers that will work. To tow that much weight you need a hitch like the Draw-Tite Max-Frame # 75232. It has a maximum towing capacity of 10,000 pounds and will fit your Ram as long as you don't have the factory hitch already. Installation does require some drilling....
view full answer... - How to Tell if Curt Hitch Receiver Will Install on a 2023 Ram 1500 ClassicHey Sal, thanks for reaching out! The Curt Trailer Hitch Receiver # 13333 will only fit if your 2023 Ram 1500 Classic doesn't have a trailer hitch receiver already installed. Since you said yours comes with the factory bumper hitch this won't be compatible unless you're able to remove that hitch. I'm attaching a video installation of this on a 2019 Ram 1500 Classic that you can use to compare what you have to what this truck was installed with when we installed the Curt hitch on it.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Test Fit:
Jared G
Test Fit:
Brent H
Test Fit:
Robert C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Patrick B
Video Edited:
Andrew L
Video Edited:
Chris R
Written by:
Lindsey S
Video by:
Kathleen M
Video by:
Zach D
Video by:
Jonathan Y
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Frank I.
10/14/2017
Ive used it quite a few times. I towed one of my cars to have a new transmission installed, a rented mini excavator twice during the 2017 summer. It is definitely doing its job pulling its weight.