Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
(2004 reviews)
Price: $34.30
In Stock
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
Item # C45016
Retail:$50.86
Our Price: $34.30
You Save: 33%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (2004)
- Q & A (0)
- Photos
CURT Trailer Hitch Ball Mount - C45016
- Fits 1-1/4 Inch Hitch
- Fixed Ball Mount
- Drop - 3 Inch
- Rise - 2 Inch
- No Ball
- 3500 lbs GTW
- Class II
- CURT
- Steel Shank - Gloss Black
- 3/4 Inch Ball Hole Diameter
Corrosion-resistant ball mount is 9-3/8" long and fits 1-1/4" x 1-1/4" trailer hitch receivers.
Features:
- Sturdy, steel construction
- Corrosion-resistant, black gloss powder coat finish
- High-quality manufacturing process
- CNC machined for strong, consistent cuts and welds
- 7-Stage washing method delivers smooth, clean surface
- Both drop and rise positions available to ensure level towing
- Hitch pin and clip or hitch lock sold separately
- Assembled in the USA
Specs:
- Application: 1-1/4" x 1-1/4" trailer hitch receivers
- Class I or Class II compatible
- Gross towing weight: 3,500 lbs
- Tongue weight: 350 lbs
- Ball hole diameter: 3/4"
- Length: 9-3/8" from center of hitch pin hole to center of ball hole
- Rise: 2-5/8" from top of inside of hitch opening
- Drop: 3-1/4" from top of inside of hitch opening
45016 Curt Ball Mount - 1-1/4" - Class I or II
D-224
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
Customer Reviews
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs - C45016
Average Customer Rating: 4.8 out of 5 stars (2004 Customer Reviews)
Corrosion-resistant ball mount is 9-3/8" long and fits 1-1/4" x 1-1/4" trailer hitch receivers.by: James01/17/2019
I needed to tow a trailer with a 2" ball. My original ball mount has a 1 7/8" ball installed. I had previously tried to change a ball on a hitch and destroyed the nut and damaged the underside of the ball mount. The lock washer had done a great job in keeping the nut from coming off. I dreaded trying to remove my 1 7/8" ball to install a new one that I would only use once.
I decided to buy a new ball mount and mount the new 2" ball.
This ball mount is so inexpensive that I realized I could have both ball sizes permanently mounted for use in either ball size.
by: John J07/23/2013
I wasn't sure what type of ball mount I needed for my new Mazda CX-9, so I had to call a representative. The first time I called, the very knowledgeable gentlemen told me exactly how to measure my SUV to figure out the drop I needed. I called back the next day and talked to a lady who helped me figure out exactly what I needed.
This is my second purchase from etrailer. The first was a hitch for my old Honda Odyssey, which was also a great experience. The employees are so helpful, the video tutorials on the web site are fantastic and the prices are great. etrailer.com is the first place I go to look for trailer and towing supplies!
John J.
1/21/2015
The ball mount and ball that I bought last year has worked out well, and is still in great shape. But Ive come to expect that etrailer.com will sell me a quality product. Thats just what they do!
by: Rick06/24/2014
I needed a ball mount that would keep the tongue lock away from the spare tire on my Jeep.
This mount gave me just enough clearance so the tire cover clears.
Handled a small trailer with 1500 # of rock / concrete easily.
Great addition for the trailer.
Great service, fast shipping.
Thanks
Rick
6/29/2015
Yes, I still like it
by: Jon 03/06/2023
Holds the ball very well and fits into the receiver socket nicely.
by: Ron R.04/06/2020
Customer service is great, returns are trouble free and fast. The hitch is very solid, and came with all hardware needed to install. I had to return a defective wire harness. Replacement worked fine. I put this on my 04 Chrysler 300M, a car that really wasn't built for towing, and the hitch works great !!
I got an excellent product at a fair price, from a company that stands behind what they sell.
I'm glad I made my purchase with etrailer.com.
by: john s10/16/2017
Online ordering was a breeze and the item shipped within a day or two of ordering. etrailers let me know via e-mail when the order was filled and provided a tracking number.
The drawbar was well packaged and quality is perfect....good welds, solid paint to prevent corrosion and the holes for the pin and ball are perfectly sized...no slop and not too tight. I would purchase again from etrailer
by: Ron 07/31/2017
A good product! This is the second hitch I have installed using etrailer and it went as well as the first. Not being a super skilled Tech it took longer than expected, but for me it was a project that needed to be done, and I enjoy a good project when it comes together, no matter if it took a little longer due to an average person's tool inventory and simple jack stands and floor jacks. The instruction videos are the best I have seen as of yet. If you enjoy working with your hands, I recommend etrailer products!
by: Larry K08/15/2017
Excellent quality and fits the car (distance from fender to trailer)
I would recommend.
Larry K.
8/28/2018
It works perfect for the Volvo S60 when towing a small camper tenttrailer.
by: Skip D10/07/2017
This, and the trailer hitch I purchased earlier are good, solid products. There was a bit of very hard paint preventing the hitch key from going through the hole, mut a half minute with a round file cleaned it out. The paint is TOUGH so I guess that will be good for long wear.
The tongue had blown through the end of the shipping package, but there was no damage.
The whole experience with etrailers.com was excellent, especially with the video instructions.
by: Dwight05/09/2018
It was easy to use the website to find the correct hitch parts for my car and to order. They arrived when expected and in an intact box, well packaged. Was able to easily install in under an hour.
Dwight
5/9/2019
Everything is still working great. Thanks.
by: Todd V.11/05/2014
I really like this ball mount for my Ford Fusion.
This is a solid piece of steel.
I did turn it upside down to get the trailer tongue to look ok.
I bought this with the Curt C12091 hitch for the Ford Fusion.
by: John04/22/2019
I have been impressed with you guys so far. Your prices are good and to have what I need. I went on {a different website}, but I like to deal with people, and talk to them when its needed, {that other website} is a selling machine, they are good with returns, but they really don't know their products, and rely on reviews to give you answers. Anyway, I will be calling you guys very soon to buy a wiring harness, and I,d like to pick one of your technicians brain for the right harness. Thanks Again for being out there
by: Rich05/21/2017
I'm using this to haul small trailer with Chevrolet Equinox. Hitch on this SUV is rated at 3500 lbs. max. Product is well made.
by: Frank11/15/2020
Carol C
Thank you so much for your response and follow up to my recent order. I didn't expect to receive my Curt Hitch and drawbar order as quickly is as did. Thank you again for your attention and promptness in processing my order. It's been a pleasure to deal with your company and I would urge people to do business with you.
by: Florida H12/23/2019
The hitch was exactly what I needed and works great for the receiver on the car. Shipment was quick and the quality and price were great.
by: Bruce08/10/2019
Though etrailer recommended the 7 1/4" length for the Focus ST models, measuring the length required is more than 7 1/4. The 9 3/8" length is a perfect match for the bumper profile.
by: Lisle06/21/2017
It had a few burs that had to be smoothed off to fit in the receiver and for the pin to go through but other than that it should be good to go for the kayak trailer.
by: Paul M08/26/2017
Product and services were excellent. The eTrailer website is clear and concise, and offer DIY videos for all products. Major plus !!
etrailer service technicians are very professional and follow up on calls and deliveries. Prices are very competitive, with shipping costs included.
I've recommended to friends who were also very satisfied.
Thanks
by: Wallace A.01/19/2017
The Class II Drawbar is working great with our 2016 Chev. Equinox. Thanks.
by: Rob S.04/07/2015
Very well made ball mount. Nice, clean welds. Good looking powder coating. Made in the USA and reasonably priced. What is there not to like about Curt products?
by: Chris F09/13/2019
The hitch package I installed on my 05 Camry is holding up great and pulls my bass tracker like a charm!
by: Roger T.01/09/2019
A nice little receiver adapter that is strong. Good quality, nothing to worry about here.
by: Van P.06/19/2015
Solid product but needs more rise to comfortably tow a U-Haul trailer with a 2015 GTI.
by: Scott S.04/25/2017
Received everything I ordered in just 2 days. Second time I used etrailer.com and would have no problem recommending them or using them again.
25
1998
Show More Reviews
See what our Experts say about this CURT Trailer Hitch Ball Mount
- Ball Mount For My Class 2 1-1/4 Inch HitchThe Curt Class II Drawbar # C45016 will move the hitch ball away from your plastic bumper. Using this drawbar will move the hitch out 9-3/8 inches which is center of hitch pin hole to center of hitch pin hole. The ball mount has a sturdy steel construction which has a black gloss powder coat finish. The ball mount has a gross towing weight up to 3,500 pounds and a tongue weight up to 350 pounds. I attached a review video link below.
view full answer... - Recommended Trailer Hitch for a 2015 VW GTI Autobahn 4 DoorThere is currently one hitch that we offer for your 2015 VW GTI Autobahn. It's the Curt hitch # C11412. It is custom fit for your GTI but it will be visible when not in use because the receiver tube is flush with the crossbar. This is a Class-I hitch and the maximum gross trailer weight is 2,000 pounds and tongue weight maximum is 200 pounds. The trailer hitches 24925 (Draw-Tite, no longer available) and 60362 (Hidden Hitch, no longer available) you referenced fit a 2015 VW Golf and...
view full answer... - Parts Needed To Tow a Trailer With a 2017 Ford Fusion SportThe Hopkins Plug-In Simple Vehicle Wiring Harness # HM11140444 is confirmed to fit he 2013-2020 Ford Fusion Sport. We have the Curt Trailer Hitch Receiver # C12164 that is also confirmed to fit your 2017 Ford Fusion. Curt recommends using either the Curt Class II Drawbar # C45016 with a 1-7/8" Ball # 19256 or 2" Ball # 19258 to match your trailer coupler. You can also use the 1-7/8" Euro Style Drawbar # C45561 or the 2" Euro Style Drawbar # C45562 if you prefer this style. I recommend...
view full answer... - Hitch and Wiring Harness Recommendation For 2015 Mazda 6We do have a light-duty Class I hitch for your 2015 Mazda 6 Sedan. I recommend Curt hitch # C11356 because it is the lowest-cost option and requires no drilling for installation. It bolts on using included hardware as shown in the linked video. The ball mount you can use is part # C45016 and for a hitch ball use either 2-inch ball # A-82 or 1-7/8-inch ball # A-80. For wiring I recommend Tow Ready kit # 118587 which will give you a 4-pole flat trailer connector. The linked article will...
view full answer... - Hitch Recommendation for a 2015 Volkswagen GolfFor a hitch for your 2015 Volkswagen Golf you would want the Curt Hitch part # C11000. For a ball mount you may also be interested in the part # C45016, for a 1-7/8 inch hitch ball part # 19256, for a 2 inch ball part # 19258.
view full answer... - Fit of Curt Class II C12091 Trailer Hitch on 2018 Ford Fusion TitaniumAccording to Curt Manufacturing, their # C12091 fits all models of the Ford Fusion, with the exception of the Sport model. If you'll be towing with your trailer, you'll need a trailer wiring harness like part # 118574, a ball mount like # C45016 and a trailer ball. For a trailer ball, use # A-80 for a 1-7/8 inch or # A-82 for a 2 inch ball. I've linked to an install video for the hitch and the trailer wiring harness.
view full answer... - What are the Measurements of Curt Trailer Hitch # C11000 Receiver OpeningYes, the opening of the Curt trailer hitch receiver # C11000, which you have referenced, will measure 1-1/4" x 1-1/4". Please consult the vehicle owner's manual first if you plan on doing any towing. The correct ball mount for use with this hitch and vehicle is # C45016. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. If you are not going to tow and instead use the hitch for something like a bike rack or cargo carrier, Curt recommends the use of stabilization strap...
view full answer... - How to Tow a Motorcycle with a 2008 Dodge CaliberAccording to owner's manual for your 2008 Dodge Caliber the gross trailer (GTW) and tongue weight (TW) rating of your vehicle with the 2.0L I4 engine is 1,000 lbs and 150 lbs respectively. Therefore, I cannot recommend you use this vehicle to haul your motorcycle (206 lbs) and carrier (36 lbs) as this would exceed the tongue weight capacity of the vehicle. The only way I can offer you to haul your motorcycle is on the back of a trailer. In order to use this trailer you would need a trailer...
view full answer... - Which Ball Mount Should be Used with Curt Hitch that Fits 2011 Dodge CaliberCurt actually recommends a longer ball mount # C45016 with the hitch part # C11006 as it is a bit longer like you mentioned and has been confirmed to be the right rise/drop and the correct length. For hitch balls the part # A-82 would be what you'd need for a 2 inch ball or part # A-80 for a 1-7/8 inch ball. For trailer wiring then we have the part # HM11142175 which is an easy fit.
view full answer... - Recommended Trailer Hitch Receiver and Wiring for 2005 Volvo S60 R SeriesI reached out to my contact at Curt regarding your 2005 Volvo S60R. They confirmed that the Curt Trailer Hitch Receiver -1-1/4" # C12318 is a fit for your R-series vehicle. If you will be using this hitch receiver for a bike rack or cargo carrier, you will need to use the stabilization strap # 18050. If you will be towing with this hitch, I recommend using ball mount # C45016 along with hitch ball # A-80 for 1-7/8 inch or # A-82 for 2 inch. For your wiring, I recommend the Upgraded...
view full answer... - Trailer Hitch and Wiring Recommendation for a 2011 Volkswagen GTI For Jet Ski Trailer TowingThe only Curt hitch available for your 2011 Volkswagen GTI is the part # C11000 which is a Class I hitch. Class II hitches are used on vehicles that have higher capacities such as larger sedans and vans. The # C11000 can still be used to tow a jet ski trailer as it has a 200 lb tongue weight and 2,000 lb trailer weight capacity. As long as your jet ski trailer weighs less than that and the towing capacity listed in your vehicle owners manual you would be good to go. The recommended ball...
view full answer... - Best Trailer Hitch for a 2004 Volvo XC70I do have a trailer hitch receiver that will fit your 2004 Volvo XC70 but it has a 1-1/4" receiver tube opening, not a 2" receiver tube opening. They do not make one with such for your Volvo and the Curt Trailer Hitch Receiver part # 13559 that you referenced will not fit. The correct trailer hitch I recommend for you is the Curt Trailer Hitch Receiver part # C12318 which as previously mentioned has a 1-1/4" receiver tube opening. The 1-1/4" receiver tube opening however can still do mostly...
view full answer...
- Can a 2016 Ford Fusion be Used to Carry a 200 Lb ScooterI do have an option for you but your 2016 Ford Fusion only has a 200 tongue weight capacity. The Curt Trailer Hitch Receiver part # C12091 that you referenced which is a fit for your Fusion has a 350 lb tongue weight capacity but since the vehicle is lower it will need to be the figure you abide by. The weakest component when you are towing or hauling is always going to be your limiting factor. The other issue you would run into trying to haul a scooter with the above trailer hitch is...
view full answer... - Availability of Longer Ball Mount with 3/4 inch Ball Hole Diameter and Around 2 inches RiseThe closest ball mount we have to the dimensions you mentioned is the part # C45016 which has a 2-5/8 inch rise, a 3/4 inch diameter ball hole, and measures 9-3/8 inches from the hitch pin hole to the ball hole.
view full answer... - Can a 2013 Volkswagen GTI Tow a Small Trailer with 2 Motorcycles LoadedFirst you are going to want to check the vehicle owners manual to determine the towing capacity of the 2013 Volkswagen GTI. As long as it has the capacity to handle the combined weight of the trailer and motorcycles then you can install a hitch and tow that trailer. The hitches available for the 2013 GTI, see link, are rated for a maximum of 2,000 pounds gross trailer weight and 200 pounds tongue weight and that includes Curt hitch # C11000 that you have selected. The recommended ball...
view full answer... - Trailer Hitch Receiver Fit for 2004 Volvo XC70We do have a fit for a trailer hitch receiver for your 2004 Volvo XC70, but the Curt Trailer Hitch Receiver - Multi Fit # C13900 will not fit your vehicle. It seems likely you wanted that hitch because it is a 2' receiver, but unfortunately there aren't any hitches with a 2" receiver that fit your 2004 XC70, so you'll need one with a 1-1/4" receiver, the Curt Trailer Hitch Receiver # C12318. If you are going to be towing with this vehicle you'll need a couple more things, the Vehicle...
view full answer... - Correct Draw Bar for Curt Class I Receiver C45025 on 2012 VW Golf TDIThe draw bar included with the hitch is part # C45016, which has a 2-5/8 inch rise, or 3-1/4 inch drop. Ideally, you want to tow the trailer so that it is as level as possible, but being within an inch and a half either way is close enough for government work. Keep in mind that hitch is designed to work best with a draw bar with the same drop as the C45016, and using a draw bar with a different rise or drop is not recommended. I will link you to our FAQ article that shows how to correctly...
view full answer... - Trailer Wiring Harness Recommendation for 2016 Mazda 6The Tow Ready # 118587 is the Trailer wiring harness I'd recommend for your 2016 Mazda 6. The installation is mainly plug and play, the harness will plug in on the driver's and passenger side, inline between the vehicle's taillight assemblies and the wiring harness that feeds them. A wire will need to be ran under the vehicle up to the engine compartment, where the wire will connect to the positive battery terminal. The Curt # C11356 trailer hitch does not have a ball mount or hitch ball...
view full answer... - Trailer Hitch and Wiring for a 2017 Ford Fusion SportFor the Sport model of the 2017 Ford Fusion you will actually need hitch # C12164. The recommended ball mount for this hitch is # C45016. For a 1-7/8 inch ball use # 19257 and for a 2 inch ball use # 19258. And for trailer wiring you can use # 118574 to add a 4-Way flat connector to the rear of the vehicle. I have linked a video showing an example installation of the wiring for you.
view full answer... - Hitch Recommendation for the 2015 VW GTIYes, we checked with Curt and the Hitch part # C11412 has been confirmed to fit all models of the 2015 Volkswagen GTI's so it should work well for you on your 2015 model. For a ball mount you may also be interested in the part # C45016, for a 1-7/8 inch hitch ball part # 19256, for a 2 inch ball part # 19258. For trailer wiring you could also use the # 1191250KIT. Check out the install video for this kit as well.
view full answer... - What is Required to Tow Lets Go Aero LittleGiant With 2017 Ford Fusion?It is not necessary to have a 2" receiver to tow the Let's Go Aero LittleGiant TLK864; this utility trailer has a coupler which attaches to a 2" hitch ball. That size hitch ball is what you'd need, along with a ball mount. The correct ball mount for a 1-1/4" hitch on your 2017 Fusion Sport would be Curt Class II Drawbar # C45016. This drawbar has a 3/4" hitch ball hole diameter, and the 2" hitch ball that would fit is the Curt # A-82. If you have this, along with a wiring harness such...
view full answer... - Is the Material of Curt Class II 1-1/4 Inch Hitch # C45015, Solid Steel or Tubular SteelThe Curt Class II 1-1/4 Inch Ball Mount, part # C45015 has a solid steel shank. It has a 5 inch rise and measures 11-5/8 inches from the center of the hitch pin hole to the center of the ball hole. The other choices I have for a 1-1/4 inch ball mount with a 5 inch rise is the Curt Class II 1-1/4 Inch Ball Mount, part # C45014 which is 9-5/8 inches long and the Draw-Tite Class II 1-1/4 Inch Ball Mount, part # 36065 which is 10 inches long. Both of those ball mounts will also have solid...
view full answer... - Correct Ball Mount For Curt Trailer Hitch C11290We do indeed have the D-224 ball mount that is designed for use with your Curt Trailer Hitch Receiver # C11290. It is the standard height for a regular trailer, and the correct part number is the following: - Curt Class II Drawbar # C45016 Though it doesn't say "D-224" as the part number, I did verify for you that this is exactly what this ball mount is. You will also need a pin and clip to secure it to your hitch, as well as a hitch ball, either a 1-7/8" ball or 2" ball depending on...
view full answer... - Extra Long Ball Mount Recommendation For 2006 Jeep Liberty With Rear Mounted Spare TireIf you have a 2-inch trailer hitch on your 2006 Jeep Liberty you can use an extra long ball mount like part #EA40. This ball mount measures 14-5/8 inches long and has a 3 inch rise or 4-inch drop. This will work with your Curt 3-Bike Clamp-on Rack, part # C18013 If you have a 1-1/4 inch receiver on your Jeep, the longest ball mount we offer is part # C45016. It is 9-3/8 inches long.
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Isabelle B
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Bradley B
Video by:
Chris R
Video by:
Adam E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James P.
1/17/2020
Still glad I purchased a new mount instead of trying to change ball sizes.