Replacement Single Axle Trailer Fender for EZ Loader Boat Trailers - Aluminum - Qty 1

Video Transcript for Review of etrailer Trailer Fenders - Replacement Aluminum Single Axle EZ Loader Trailer - HP83VR

Hi everybody, Andy here with etrailer.com and today we're gonna take a look at this replacement single axle trailer fender for your EZ Loader Boat Trailers. This fender is going to cover one tire on either the left hand or right hand side of your single axle EZ Loader Boat Trailer. And as you no doubt know, this fender's gonna do a great job of blocking road debris from hitting other vehicles and help protect your trailer's cargo. Now, this inner edge, as you can see, is going to tilt away from your trailer to provide extra clearance for your boat. And again, you're gonna be able to mount this on either the left hand or the right hand side of your trailer. And the one inch wide outer edge is rounded, as you can see there.

And this fender is made here in the USA of a rustproof corrosion resistant aluminum construction. It features a 0.063 aluminum diamond plate that is stylish and rugged as well. And this is going to be a bolt-on installation. The mounting brackets are sold separately. Usually you will wanna use your existing mounting hardware if possible.

Now, let me go ahead and give you some overall measurements, so you can be confident that this is going to work for you. So, beginning with the overall length, and I'm gonna line this up here from end-to-end. As you can see, we are sitting right at 27 inches long. And then, give me my ruler here for some of these smaller measurements. Looking at the widest point, I'm gonna come over there and line my ruler up.

As you can see, we are sitting right at, line that up a little better for you. We're sitting right about nine inches wide at the widest point at the bottom. And then, at the top it tapers a little, it becomes a little more narrower, more at the closer to the top that you get, we're sitting right at about seven and three quarters inches wide. And then looking at the overall height, I'm gonna get my tape measure here. We're sitting right at, right about 11 and a half inches tall.

Now, I weighed this fender earlier before our time together and this weighs almost two and a half pounds. So, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.