Demco Commander II Non-Binding Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
(53 reviews)
Price: $859.00
Demco Commander II Non-Binding Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
Item # DM9511012
Retail:$1,013.00
Our Price: $859.00
You Save: $154.00
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (53)
- Q & A (0)
- Photos
Demco Tow Bar - DM9511012
- Fits Demco Base Plates
- Telescoping
- Hitch Mount Style
- 6000 lbs
- Demco
- Non-Binding
- Stores on RV
- Steel
The smart design of this tow bar makes it easy to use. The arms support their own weight while you hook up and swing easily to either side for storage. Integrated safety cables keep your setup organized. Convenient built-in rise/drop.
Features:
- Safely bring your vehicle along behind your RV
- Self-supporting arms won't fall to the ground as you're hooking up
- Smoothly extend and pivot to reach the base plate
- Automatically lock into towing position when you pull forward
- Extra-long arms help you make tight turns
- Built-in rise/drop and tilt ensure tow bar is level during towing
- Quick disconnect, even on rough terrain, with non-binding levers
- Organized setup
- Straight safety cables are integrated into the tow bar
- Storage rod keeps electrical cord (sold separately) off the ground
- Effortless storage: swing arms to the left or right and they'll lock in place
- Steel construction with an E-coat finish resists corrosion
- Made in the USA
Specs:
- Fits: Demco and etrailer base plates
- Can be used with base plates from other manufacturers with adapter (sold separately)
- Application: 2" x 2" trailer hitch receivers
- Arm length (from center of hitch pin hole at end of shank to center of base plate pin hole when lined up with arms straight):
- Extended: 51-3/4"
- Retracted: 39-1/4"
- Built-in rise/drop: 1-1/2"
- Head tilts an additional 3" up or down to keep tow bar level with the road
- Weight capacity: 6,000 lbs
- Weight: 41 lbs
- Safety cable rating: 14,000 lbs
- Lifetime limited warranty
Note: If you add a hitch extender to your setup, you may need safety cable extensions (sold separately) to reach your tow vehicle's hitch.
Works with Blue Ox, Roadmaster, Reese, and Duncan Base Plates with Adapter
| Base Plate | Adapter |
|---|---|
| Blue Ox | DM9523041 |
| Roadmaster Crossbar-Style (XL, EZ, EZ2, and EZ4 series) | DM9523001 |
| Roadmaster Direct-Connect (EZ5, MS, MX series) | DM9523032 |
| Reese Tow Champ and Valley Industries | DM9523019 |
| Duncan | DM9523017 |
Easy Hookup: Self-Supporting Arms
The Commander II has a lot of smart features that give you the flexibility to hook up your toad (towed vehicle) to your RV, without the need for your vehicle to be perfectly level or in the exact right spot.
First of all, the arms are self-supporting, meaning that they hold themselves up without your help and won't fall to the ground when you let them go. They also move independently of each other, so you can focus on getting just one arm connected at a time. You'll never be stuck wrestling with a heavy tow bar.
Just slide the tow bar into your hitch and pin it in place. The telescoping arms will extend, pivot, and tilt to the needed length and angle to reach the tabs on your base plate. You can get hooked up and on with your adventure.
Once the tow bar's connected, slowly pull forward and the self-aligning arms will fully extend and lock into the towing position. Double check that the arms are properly latched and you'll be ready to hit the road!
Important: The arms need to be set up so that the storage rod is on the outside of the arm. Otherwise, the tow bar could be damaged when taking turns.
Extra-Long Arms Get You Around Tight Turns
The Commander's arms are longer than average, giving you an above-average turning radius. You're going to be able to get around obstacles and make sharp turns with no worry of clipping the corner of your RV. Maneuver through gas stations and the campsite no problem.
Built-In Rise/Drop
It's important that your tow bar is as level as possible while you're flat towing, with no more than a 3" difference between where the tow bar sits in the hitch receiver and where the arms meet the base plate. It's fairly common for the hitch on an RV to sit too high in comparison to the toad, making it necessary to buy a high-low adapter.
With Demco tow bars, the rise/drop is built right in, so it's less likely that you'll need an extra adapter. The head joint is also able to tilt up and down so you can make the tow bar level for your particular setup.
Non-Binding for Easy Disconnect
Uneven ground and sharp angles can put the arms of the tow bar in a bind and make them stiff and immoveable. Once you get to your destination, the last thing you need is to spend several minutes wrestling, yanking, and kicking at them to get your car disconnected.
Instead, get out of a bind in one easy step. Simply give the trigger on the arm of the Commander a squeeze to disengage the internal latch. This releases the pent-up pressure so you can unhook and get on with your adventure.
Each trigger release latch is positioned on the side of the tow bar arm. This allows for a comfortable yet firm grip, unlike latches that are positioned on the tops of tow bar arms, which can be difficult to grab. This out-of-the-way placement also creates a clean look for the tow bar.
Organized Setup: Integrated Safety Cables
Two straight, vinyl-coated safety cables are integrated right into this tow bar, keeping them from dragging on the ground and getting damaged. They won't get lost or tangled either; your whole setup will be streamlined and organized.
These cables, required by law, will keep your toad behind your RV if there's ever an accidental disconnect while you're towing. The steel S-hooks on each end of the cables connect to the toad's base plate and the RV's trailer hitch, with spring-loaded latches to ensure that they stay connected.
All Demco safety cables are rated at 14,000 lbs, regardless of the rating of the tow bar. While it's not necessary to have such a high rating, it's nice to know that in the event of an emergency disconnect, these heavy-duty cables will be more than capable of catching your vehicle. If all else fails, these safety cables won't.
The tow bar also offers a convenient storage rod for securing your coiled electrical cord (sold separately). The rod holds your power cord neatly out of the way and up off the ground.
Ridiculously Easy Storage
The Demco Commander II is incredibly easy to store on the back of your RV. Most RV-mounted tow bars require you to lift the heavy arms all the way up; they have to be fully vertical before you can secure them in the stowed position. With Demco tow bars, all you have to do is raise the arms an inch or two - which you probably would do anyway while unhooking - and swing them to either side. When you lower them down again, the locking pin will automatically slide into the built-in tab. They can store to the left, right, or with one arm each way, however is convenient for you.
For added protection, slip on the Demco tow bar cover (DM9523042 - sold separately) when you're not using the tow bar.
What You Need to Flat Tow
Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.
To flat tow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flat tow braking system.
| For the RV | Between the RV and Towed Car | For the Towed Car |
|---|---|---|
| Hitch | Tow bar | Base plate |
| Wiring plug | Safety cables | Braking system |
| Wiring adapter cord | Wiring kit/diodes |
The custom-fit base plate installs on the frame of your toad so you can connect the car to your RV with a tow bar. Hook up safety cables between the vehicles to ensure that the toad does not separate from the motorhome if the tow bar becomes detached. Tow bar wiring syncs your vehicle's signal lights with your motorhome's tail lights, as required by law in most states. Finally, the flat tow braking system - also required in most states - activates the brakes in the toad when you hit the brakes in the RV, making for smoother, safer braking, and preventing wear on your motorhome.
9511012 Demco Commander 2 Non Binding Towbar - Victory Series - Motorhome Mounted Towbar - 2" Hitch - 6K Rating
Replaces 9511010
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- etrailer mistake
Customer Reviews
Demco Commander II Non-Binding Tow Bar - RV Mount - 2" Hitch - 6,000 lbs - DM9511012
Average Customer Rating: 4.8 out of 5 stars (53 Customer Reviews)
The smart design of this tow bar makes it easy to use. The arms support their own weight while you hook up and swing easily to either side for storage. Integrated safety cables keep your setup organized. Convenient built-in rise/drop.by: Timmy04/11/2024
I've used this setup for a year towing a 2023 Jeep Wrangler . I 100% recommend it for anyone else. Under normal conditions it is very easy. Under stressful conditions (bad weather, uneven terrain, need to connect/disconnect quickly) it is a life saver.
I am 63 and I can connect/disconnect this in 5 minutes.
by: Rob 04/25/2024
The customer service has been outstanding, helping me to understand all the parts I needed, telling me about the videos with step by step instructions, and the unbelievable fast delivery of the product.
by: Jerry J01/28/2021
Solidly built. I paired this with a Demco Tabless Base Plate (DM9519336) on my 2021 Jeep Wrangler, pulled by my 2020 Winnebago View. Easy to connect and disconnect, and the self-supporting arms are a plus. The supplied 54" safety cables were too short, since I needed to add a 4" drop receiver. After testing in the parking lot with minimum turn radius, I've ordered the 64" cables. Bummed to buy a complete extra set of safety cables. (Demco does make short safety cable extensions, but they cost almost as much as the complete longer cables.)
by: William 10/29/2023
I'm very pleased with etrailerr customer service is great
by: Richard06/17/2021
We really like the Demco Commander II because it is so easy to use- not overly heavy or difficult to attach or connect to towed vehicle. We can use it both of our toads- 2012 Chev Colorado and 2018 Jeep Grand Cherokee. We've used other heavy tow bars that were difficult to connect and had intergral brake system that was hard to use as well. The Demco also folds easily out of the way, has a holder for the cables and the electrical cord. Very neat and easy.
by: T.J. Shepherd09/07/2020
I really like using the Demco non-binding tow bar. Hooking up is so much easier with it than our previous tow bar. No need to level and square up the toad with the motor home. I also like having the safety cables permanently attached to the bar.
We changed toad vehicles this year, so I bought a Demco base plate for our CRV. The tow bar shafts simply plug into the base plate. It couldn't get any easier.
by: Thomas 05/20/2021
Everything came in perfect condition. Chris was great, kept me informed right up through delivery. Highly recommend etrailer!
Thomas
5/28/2022
Over 3,000 miles on the tow bar and no problems whatsoever pulling a 2021 Ford Ranger. Great well built strong tow bar that I highly recommend. Demco makes great products and stands behind them.
by: John05/04/2021
Good product and excellent service with etrailer. I will certainly be returning when any requirement arises.
John
5/4/2022
Wonderful, no issues !
by: Bryan 05/02/2021
Love the Demco tow bar system! Installation was easy because of the videos on etrailer. Thanks!!
by: Pete04/20/2022
This is great and easy to use. Instalation was easy. You can attach my Jeep Grand Cherokee in minutes. It is just as easy to disconnect.
by: James12/07/2019
I usually don't take the time to write reviews. However, Vanessa was such a great help I felt others should know about her commitment to customer service. I was looking for a tow bar system to pull a 1978 Jeep CJ7 behind my motorhome. We talked threw all the options for my purchase and came up with the tow package that was the best fit for my needs. I will be installing the system next week.
by: John 06/16/2021
Works great, it was a challenge drilling the holes and installing the bolts for the brackets on my Jeep CJ7 bumper.
by: Robert02/09/2022
Very happy with the easy process in ordering, tracking and hooking it up to my tow vehicle.
by: RJM08/02/2022
Works as expected, just wish I bought the cover to protect the tow bar when stored on the RV.
by: Michael 10/01/2021
We can connect or disconnect the car in 5 minutes. WORKS REALLY WELL.
by: Leigh02/20/2021
Would buy again great product. Everything that I have purchased from etrailer have been great..
by: Toby 09/25/2021
Worked great, easy installation.
Was able to self install with step by step. Got my order in 3 days. Great job etrailer.
by: William08/20/2022
Haven’t used it yet . It’s still in the box . I rated it 5 stars because it’s box looks great and I know there’s something heavy in there . Now can I submit my review ?
by: Barry 08/13/2021
Barry
8/14/2022
The tow bar system has been performing great. It is easy to hook up to my Ram 1500. Very pleased with the performance.
by: Bonita03/08/2021
Easy hook up, well made and designed.
by: Patrick 03/30/2021
Easy to install and works great
by: Todd 11/17/2021
Love it, it works great
by: Jacob 08/05/2020
quick delivery and hooked right up just need a trip now
by: Don02/07/2024
by: Chris09/04/2020
Nice unit, heavy, but they told me that and I very seldom remove it from my coach. Order taker was nice and very thorough.
25
53
Show More Reviews
See what our Experts say about this Demco Tow Bar
- Recommended Flat Tow Setup for a 2014 Chevy Captiva SportI can definitely help you out with parts to flat tow your 2014 Chevy Captiva Sport. I really like the Demco setup you were looking at because Demco offers a few kits that include just about everything that you need, plus they have very nice tow bars that will last you a long time which you can use on future vehicles you choose to flat tow. For a base plate kit use part # DM9518218 and the the Demco tow bar I recommend is the Dominator # DM9511008 because it has a 7,500 lb weight capacity...
view full answer... - Flat Towing Recommendations For A 2021 Chevy Colorado Z71The Demco Tabless Base Plate Kit - Removable Arms Item # DM9519319 will fit your 2021 Chevy Colorado as long as it doesn't have adaptive cruise control. If you do have adaptive cruise control I recommend the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms Item # RM57VR. The Demco Commander II Non-Binding Tow Bar # DM9511012 you linked to will work with the # DM9519319. You will also need tow bar wiring and a braking system. I have the following recommendations for your below: Tow...
view full answer... - Is MOPAR Kit 68321424AB Needed to Flat Tow 2020 Jeep CherokeeThe MOPAR Part 68321424AB is not required for flat towing your 2020 Jeep Cherokee. Jeep recently was able to fix the problem with the "death wobble" that older models sometimes experienced with flat towing. A complete flat towing setup includes a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. If you don't already have your equipment then I recommend the following: Demco Base Plate Kit # DM9519338 OR Kit #...
view full answer... - Recommended Baseplate Kit For 2021 Jeep Wrangler Unlimited With Factory Steel Bumper and Warn WinchWe have exactly what you are looking for! For your 2021 Jeep Wrangler Unlimited with the Factory Steel Bumper and Winch we have the Demco Tabless Base Plate Kit # DM9519339 which is a confirmed fit, and is currently the only option that works with the factory winch. To complete your flat tow setup you will also need the following components: Tow bar: Demco Commander II Non-Binding Tow Bar - Victory Series # DM9511012 which includes safety cables so you do not need to purchase them separately. Tow...
view full answer... - Dolly Tow a Ford F-150 Crew cabThe RoadMaster Tow Dolly # RM-2050-1 has a maximum vehicle weight of 4,250 lbs. Your 2006 Ford F-150 will weigh around 4,500lbs curb weight so while it could tow a vehicle with this dolly it could not be towed on this dolly. Flat towing is an option for you per the owners manual. Pages 198-199 provide specific guidance as to the steps you take when flat towing your 2006 F-150 for both automatic and manual transmission models. As for parts to use to flat tow, below is a list to get...
view full answer... - Demco Commander II Tow Bar Adapter To Roadmaster Base PlatesThe Demco Tow Bar Adapter # DM9523032 will fit your Demco Commander II Non-Binding Tow Bar # DM9511012 for connecting to a direct connect base plate on your 2008 Toyota Yaris. If your Yaris requires the crossbar you will need the Demco Tow Bar Adapter for Roadmaster XL and EZ Series Base Plates # DM9523001 to act as your crossbar.
view full answer... - Parts Needed to Flat Tow a 2004 GMC EnvoyChoosing the correct tow bar will vary a little depending on what brand base plate is installed on your 2004 GMC Envoy. If you don't already have a base plate kit then I recommend going with the Demco Classic # DM9518119 which will pair very nicely with the Demco Commander II Non-Binding Tow Bar # DM9511012. To complete your towing setup you also need wiring and a supplemental braking system. For wiring I personally like the Combo Kit # DM9523057 because it also comes with locks and a...
view full answer... - Parts Needed to Flat Tow a 2004 Honda Pilot with a 2013 Jayco Melbourne 28F Motor HomeYou have come to the right place. The first thing you are going to want to look at is the vehicle owners manual for the manufacturer recommended towing method and if there are any special recommendations for your 2004 Honda Pilot. There are 5 items you will need to flat tow a vehicle: Base plates, tow bar, safety cables, lighting, and supplemental braking. For base plates, there are several options, see link. I like the Demco products so I recommend part # DM9517143. These base plates...
view full answer... - Flat Towing a 2007 Suzuki XL7You will need to refer to you vehicle specific owners manual as to whether your 2007 Suzuki XL7 can be flat towed; trim levels, transmission options and other vehicle specific options all need to be considered to determine if a vehicle can be flat towed safely and without damage occurring. If you determine that your 2007 Suzuki XL7 can be flat towed you will need the following items: A base plate kit. I suggest the Demco Classic Base Plate Kit, # DM9518137. This is a confirmed fit for...
view full answer... - Will Classic Base Plate Kit # DM9518312 for 2014 Kia Soul Work with 24 Wide Tow BarThe Demco Classic Base Plate Kit # DM9518312 for your 2014 Kia Soul measures 21" center to center between the brackets. This means that your current fixed tow bar isn't compatible but we do have a solution for you. I recommend using the Commander II Tow Bar # DM9511012 with the Classic base plate kit. This features adjustable arms and comes with safety cables. The whole kit is rated for 6,000 lbs so you won't have any trouble with your Kia Soul. For a complete flat towing setup you will...
view full answer... - Is a Demco Commander II Adapter Available for D-Rings on 2006 Jeep TJ BumperI reached out to my contact at Demco who said that they don't offer any adapters that will fit the Demco Commander II # DM9511012. Other adapters from different manufacturers, like the Roadmaster # RM-035-1, won't be compatible either but I do have solution for you. Since this is the case your best bet is to swap out your tow bar for the Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522 which also features a non-binding design and will work with the D-Ring adapter mentioned above. The...
view full answer... - Is There a Range of Roadmaster Even Brake Transmitter & Monitor for 2020 Ford RangerThere is not a specific range that that is limiting in regards to the distance between the ICX transmitter and monitor for the Roadmaster Even Brake Portable Supplemental Braking System # RM-9400, and will absolutely work on a 40 foot motorhome without issue. The transmitter is what relays the signal to your monitor about the status of the braking system, but it's the inertia sensor in the system that actually activates the brakes. The Roadmaster Even Brake Portable Supplemental Braking...
view full answer... - Can a 2010 Kia Soul with Manual Transmission be Towed Behind a Motor HomeI did some research on your 2010 Kia Soul with the manual transmission and found that it can be flat towed. Models with automatic transmissions cannot be flat towed and must be towed with a tow dolly like part # RM-2050-1. I recommend checking the towing section of your owners manual for any other procedures or limitations that Kia may have to flat tow your vehicle. The Blue Ox Patriot 3 # BLU37TR along with the # RM-9332, the Demco Base Plate Kit, # DM9518246, and the Commander Tow...
view full answer... - Parts Needed to Flat Tow 2007 Volkswagen New Beetle behind MotorhomeFor a base plate kit to flat tow your 2007 Volkswagen New Beetle with a manual transmission I recommend the Demco # DM9518071. You don't need to worry about removing the arms when not towing and it's barely visible compared to some other kits. For a compatible tow bar use the Commander # DM9511012. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control...
view full answer... - Compatible Demco Baseplate For A 2014 Honda CR-V With A Demco Commander Tow Bar Yes, the Demco Tabless Base Plate Kit # DM9519328 would be a compatible fit for both your 2014 Honda CR-V as well as the Commander Tow Bar # DM9511012. If you need help picking out any other components that you can't transfer over then let me know and I'd be happy to help. I do know that you'll have to pull the ACC RADIO 19 fuse in the Honda so I do recommend picking up the Roadmaster FuseMaster Fuse Bypass # RM76511 to make this process as easy as flipping a switch.
view full answer... - Economically Priced Flat Towing Parts Needed to Tow a 2004 Acura MDXThere are several parts needed to flat tow a vehicle like your 2004 Acura MDX. I will try to list the most economically priced options that would work for you. First let's start with a base plate kit. For that you want the Demo base plate part # DM9517122. This works with the Commander Tow Bar part # DM9511012. The Commander includes safety cables and actually gives you 1-1/2 inches of either rise or drop so you may not need a high-low adapter. If you still do I've linked our selection...
view full answer... - Recommended Flat Towing Components for 2006 VW Beetle TDIIf your 2006 VW Beetle TDI is an automatic transmission, then it can only be towed using a tow dolly like Roadmaster's # RM-2050-1. You can see this outlined in your owners manual. If your Beetle has a manual transmission, then it can be flat towed with a speed restriction of 65 mph. For flat towing components, I recommend we start with theDemco Classic Base Plate Kit # DM9518071 confirmed to fit your TDI model. Then for a compatible tow bar, I recommend the Demco Commander II # DM9511012...
view full answer... - Can Demco Commander Tow Bar be Used with Roadmaster Base Plate for 2015 Toyota TacomaHey Dal, so the Roadmaster base plate kit part # 1175-3 can be used with a Demco Commander tow bar part # DM9511012 but you will need to use the adapter part # DM9523032 with it.
view full answer... - Can Demco Base Plate Kit # DM9517190 Work with Commander Tow BarHey Dee, the Demco base plate kit part # DM9517190 that you referenced is perfectly compatible with the Demco Commander tow bar part # DM9511012.
view full answer... - Base Plates For 2023 Jeep Gladiator Mojave With Demco Tow BarWe can get your 2023 Jeep Gladiator Mojave set up with base plates. Demco doesn't have base plates for the Mojave but you can still use your tow bar like the Commander # DM9511012, you'll just need an adapter to do so. For base plates and the adapter use the following: - Roadmaster Direct-Connect Base Plate Kit # RM77VR - Demco Tow Bar Adapter Kit for Roadmaster Direct-Connect Base Plates # DM9523032 This base plate kit is designed specifically for the Gladiator Mojave and the adapter...
view full answer... - Can Roadmaster Tow Defender be Used w/ etrailer Base Plates & Roadmaster Tow Bar on 2012 WranglerYou will not be able to mix and match different manufacturer's base plates and tow bars on your 2012 Jeep Wrangler in order to use the Roadmaster Tow Defender Protective Screening # RM-4750. In order to use it you will need to use either of the following: - Roadmaster Direct-Connect Base Plate Kit # RM-521448-5 & Roadmaster Falcon All Terrain Tow Bar # RM-522 or - etrailer Invisible Base Plate Kit # e98949 & Demco Commander II Non-Binding Tow Bar # DM9511012
view full answer... - Parts Needed to Flat Tow a 2007 Honda CR-V LX AWD Behind a Coachmen Motor HomeThe first items you will need to flat tow your 2007 Honda CR-V LX AWD behind your Coachmen motor home is a base plate kit and a tow bar. The Demco tabless base plate kit, part # DM9519207, will fit your CR-V and it is compatible with the Commander tow bar, part # DM9511012. The tow bar also includes safety cables which are required by law. The next item you will need is a light kit. I recommend a magnetic kit like # RM-2120. This kit does not require any cutting and splicing into your...
view full answer... - Will Curt Tow Bar With Bumper Brackets Work on 2004 Jeep TJYou can use the Curt Tow Bar with Adjustable-Width Arms # C19745 that comes with bumper brackets on your 2004 Jeep TJ, though you will need to find a way to mount the bumper brackets. These will require a flat metal part of your bumper, which nearly always has to be fabricated - if you take a look at the accompanying photo a customer sent in you can see how they attached these brackets to their Jeep; the brackets will need to be drilled into the bumper. There are no tow bars that do not...
view full answer...
- Recommended Flat Towing Setup for a 2018 Jeep Grand Cherokee LimitedFor your 2018 Jeep Grand Cherokee Limited I recommend starting with the Demco Tabless Base Plate Kit # DM9519291. Then you can use the Demco Commander Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lbs # DM9511012 which has the included safety chains as well as the integrated adjustable head for proper fit. For your tow bar wiring I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 as well as the charge line kit # RM-156-25. This kit will allow you to utilize...
view full answer...
Do you have a question about this Tow Bar?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Video Edited:
Zach D
Video Edited:
Jonathan Y
Video by:
Dustin K
Video by:
Thomas T
Updated by:
Wilson B
Updated by:
Noah M
Updated by:
Manda E
Updated by:
Amanda K
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Clayton O
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Richard
6/18/2022
We have used the Demco Commander for about 8000 miles with out any issues.