Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
Item # RM-152-98146-7
Our Price: $193.11
Confirmed to Fit
2010 Chevrolet Silverado
1500
2500
3500
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (251)
- Q & A (0)
- Photos
2010 Chevrolet Silverado - Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Universal
- Roadmaster
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.
Features:
- Complete wiring kit lets you connect your RV's tail, brake, and turn signal lights to your towed Toyota Corolla's lighting system
- Wires towed car as a combined lighting system so that brake and turn signals travel along same wire
- Diodes prevent electrical feedback and the damage it can cause to your car's electrical components
- 7-Wire to 6-wire adapter cord allows you to run power from your RV to your towed Toyota Corolla
- Straight cord is ideal for all-terrain tow bars and other tow bars that have channel guides
- 6-Way socket wires to harness and mounts on towed car with included bracket
- Sturdy, durable construction
- Powder-coated aluminum casings protect diodes from corrosion
- Electrical cord resists water, oil and chemicals
- Silicone-injected plugs prevent corrosion
- Kit includes:
- 4 Hy-Power diodes
- Wiring harness
- 7-Way to 6-way adapter cord
- 6-Way socket with mounting bracket
- Wire connectors
- Cable ties
- 1 Ring terminal
- 3' Long plastic loom
- Brake light relay (RM-88400 - sold separately) may be required if used with supplemental braking system
- Limited Lifetime Warranty
Specs:
- Maximum amperage: 85 amps
- Maximum voltage: 24 volts
- Adapter cord length: 6-1/2'
- Wire gauge: 16
- Wiring harness length: 30'
Note: For applications that have separate lighting, this kit will cause your brake lights to function as both brake and turn signal lights. A wiring converter (118158 - sold separately) and 2 additional diodes will be needed if you want to retain separate turn and brake signals.
Separate vs. Combined Lighting Systems
Some automobiles operate on a 3-wire system, wherein the brake signal and the turn signals travel along different wires to illuminate different lights. (Typically, these Toyota Corollas have amber turn signals.) This is referred to as a "separate lighting system". When you hook up for flat towing using this kit, your towed car's lighting system will operate in a combined fashion regardless of whether it typically has combined or separate lighting. This means that the brake and turn signals sent by your RV to your towed car will be carried on a single wire. As a result, your car's brake lights will do the flashing for the turn signals. Your Toyota Corolla will still function as designed when not hooked up to your RV.
Do You Need a Brake Light Relay?
Because this kit wires your Toyota Corolla as a combined system, a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.
RM-152 Roadmaster Universal Hy-Power Diode Wiring Kit
RM-98146-7 Roadmaster Wiring - Straight 6 to 7 - 78" Long
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord - RM-152-98146-7
Average Customer Rating: 4.7 out of 5 stars (251 Customer Reviews)
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.by: Bill11/06/2023
The install on my Ford Maverick is clean and functional, so this is more of a customer service review... excellent customer service!
During the 4-day towing set-up install, the forecast was for freezing temps and my rig was not winterized. I called in mid panic and the motorhome was moved indoors.
A few months after using the tow set-up, a minor problem developed. I called and the CSR apologized and said, I can see how that might be frustrating, and a replacement cable (slightly longer) was sent free of charge.
by: Edward 05/16/2024
I also purchased brackets and receivers for the tow bar. Both were as advertised and are functioning very well. The staff were also very knowledgeable and helpful. Hard to find service of this kind in today’s world.
by: Phil 04/04/2024
The installation ins ructions and video were very helpful. The wiring kit worked perfectly.
by: Jason05/08/2023
Great kit. Easy to install. Connectors seem solid and wires are good.
by: James02/24/2024
The installation took some time and the instructions need to be clarified.
by: Dean 10/18/2023
Roadmaster
The Roadmaster 4 diode wiring kit has worked great for a full towing season.
Easy installation, great instructions, and added safety while towing.
The wiring kit easily integrated into the other braking and towing system components.
Thanks e-trailer!
by: Juan09/15/2021
2013 Subaru Forester
Works as expected. Connection feels solid enough. Have not had the opportunity to take it on a long trip yet.
One thing bit us in the butt, forcing us to cancel a trip at the last minute (when testing that our towed vehicle's turn signals, brake lights and supplemental brake system was working before driving off!): the left-turn signal prong in the male part of the connector (that plugs into the towed vehicle) was not opened enough, so no steady connection was being made because there was no contact between the prong and the walls of the female part. This had worked in a previous test. Picture included. Make sure to use a flathead screwdriver to open each prong up so full contact is made!
by: William 08/03/2023
This kit worked great. It was easy to install (etrailer offers installation videos if needed). I like this much better than a temporary set of lights on the towed vehicle. The cord and plug are also good quality.
by: Daniel05/02/2024
Easy install. Good directions. Works as described.
by: Stephen B07/14/2023
I have not been disappointed with anything I have ordered from you.
This wiring kit should do the trick for my flat towing project.
I am sorry that I couldn’t get all of the pieces from you, the transmission pump and base plate was ordered from another company.
This is my fourth camper you are helping me keep maintained and improved.
2000 Cougar 5th wheel bunkhouse,2016 Sprinter 5th wheel front living room , 2021 Nexus 31t class C and a 2016 sprinter tow behind.
by: Steve05/27/2021
I chose the order by phone option. The website is well organized, but, I had gone too long without hearing another person. I have received several orders from etrailer after purchasing an RV last summer. I knew we would be Purchasing a Toad.
I don’t have any experience with towing another vehicle, so I had plenty of help in finding the right equipment for me.
The delivery times were all easily tracked and arrived in good condition. As md on time.
I had the simple tools required to install the base plate and hitch. The videos available on their site are clear and easy to understand.
I have had a great overall experience with etrailer.
by: Janes01/10/2024
Easy instructions and works great!!!
by: James04/10/2022
2019 GMC Acadia
Very straight forward install, easy to follow instructions. If you do this your self be prepared, the factory light wiring isn't very long or thick it was difficult to strip the wire back far enough to double it over to get a good connection. Upon completion of the wiring, I double checked all power at both plugs, it was all good, I installed the lights, brake and turnsignals worked great, I didn't have any running lights. About 3 min later they came on and stayed on. I don't believe this has any thing to do with the kit, this vehicle has all kinds of light sensors, darkness sensors, rain sensors.. etc. I believe it just too a min or 2 for the lights to actually come on.
by: Joe H08/31/2022
See my review on the Base Plate. The electric was a little wonky but my mechanic met with the manufacturer and was able to figure it out. That said, once it was resolved, it has worked flawlessly.
by: James04/20/2022
Toyota Tacoma
I had a Toyota Tacoma that has separate blinker lights. Took a mechanic that was knowledgeable in electrical wiring. Followed the instructions and it worked perfect. Used it several times since
James J.
4/21/2023
Great. Been on several trips. No problem
by: Wayne05/17/2023
All running and signal lights work great. But no license plate light illumination.
Jenny N.
5/23/2023
You are correct in that the tow bar wiring harness part # RM-152-98146-7 will not illuminate the license plate light as the diodes are meant to keep the signals from backfeeding into your vehicle wiring. We have checked into this and having the license plate light is not mandatory when flat towing.
by: Bruce 10/04/2023
Easy to install. Would prefer a different method for securing the diodes. I used zip ties of good quality from Ty-Rap instead of the box store cheap imitations.
by: Tom F09/10/2023
2020 Jeep Wrangler
Very straightforward. I followed along to one of the videos on etrailer's site and it went very easy for me thank you etrailer!
by: Richard 02/23/2024
Works great.
by: Beemerjohn12/27/2023
Wiring was about 8 feet short to complete the task.
by: Don 04/13/2023
Honda
Kit worked well. On 2012 Honda CRV I was able to run the wire to the rear under interior panels then install diodes inside each quarter panels eliminating any wiring or component connections exposed to the weather.
by: Boyd10/03/2022
2003 Jeep TJ
1 star is simply for the fact that the straight cord is too short. Bought to use with a road master tow bar. Since I needed a drop hitch to line the tow bat up with the toad I needed about a foot more cable. Tried to make do with the one supplied. I ended up having to spend an hour in the parking lot of an rv store wiring up a new one on my first trip. You would think for [local stores] you have to pay for this they could spring for a little extra wite.
Katrina B.
10/17/2022
That is unfortunate that there was not enough wire for your application. We do carry 16 gauge bonded 4 wire, part # 16-4B-1, by the foot. You can always contact our customer service department for them to assist you in getting this wire ordered.
by: Edwin01/27/2023
It was the installation that was a issue, it works great now that I finally got it installed correctly. Had to go through 3 companies before it worked. It cost me 3 times as much, I went to a recommended installer from your site, and they hook it up but didn’t used the diodes that were provided. I took it back, and asked them to install the diodes.(the company “Fatal LLC”) charged me [XX] I kept getting feedback when the emergency lights were used, they say it’s normal for that to do that. I didn’t believe it, so I-took it to camping world, they rewired it and used a different diode don’t asked me why, but it-still didn’t work they said it would eventually work itself out, It didn’t, so I had still have the problem with the feedback when using the emergency flashers. I guess I’ll live with it. It works I guess….
by: Neal 04/08/2023
2023 Jeep Wrangler
Have not installed yet (DUO Brake system and wiring) from what I have seen I am impressed with all parts delivered.
tow bar Plate is more than substantial and the Tow bar is amazing.
by: Matt09/03/2022
I ordered base plates and the wire harness, the wire harness would not allow for brake, running, and turn signal lights, I had to omit one, the turn signals. The base plates where difficult, requires removing the front of the car. the video did not state the distance front to rear, I was a half inch to far forward and the fog light would not fit.
Jenny N.
9/20/2022
You mentioned that the harness would not allow for the brake, running and turn signal lights. For vehicles that have separate turn and brake lights, this kit will cause your brake lights to function as both brake and turn signal lights. This is perfectly fine. If you want to have both separate turn and brake signals, then you will need part # 118158 and part # RM-792 to do so.
25
251
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Wiring
- Blue Ox Compatible Base Plate for a 2018 JL Jeep UnlimitedSince you have a Blue Ox tow bar, the best base plate for your 2018 Jeep JL Unlimited Sport is going to be the Blue Ox Base Plate Kit item # BX1139. This kit works if you have the factory steel or plastic bumper. I have linked an installation video below so you can understand the process. If you have an Off-Road bumper - with 7/8 inch D-Ring bumper mounts you will need the item # BX88357. If your Off-Road Bumper has 1 inch D-Ring bumper mounts you will need the item # BX88358. For a...
view full answer... - Recommended Baseplate For A 2012 Jeep Wrangler Unlimited With A Sterling Tow Bar The crossbar for your older Sterling Tow Bar can be removed to utilize the Direct-Connect attachment points and connect to the Roadmaster Direct-Connect Base Plate Kit # RM-521448-5, which will fit your 2012 Jeep Wrangler. Just pull the pin and clip on each leg and release the crossbar from the tow bar. Note: This baseplate was designed to fit a factory bumper, if you have something else let me know. If you haven't already purchased all the other components to flat tow your Jeep then...
view full answer... - Parts Needed to Flat Tow 2015 Jeep Cherokee Latitude 4WDI googled the owner's manual for a 2015 Jeep Cherokee and a 4WD can be flat towed if it has a 2-Speed Power Transfer Unit. I then googled the curb weight and it said between 3,600 lbs and 3,900 lbs. In order to flat tow your '15 Cherokee Latitude with 4WD there are a number of parts you'll need: - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-521447-5 - Tow Bar: Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522 - Safety Cables # RM-645 - Wiring Kit: Roadmaster...
view full answer... - Flat Tow Setup For A 2006 Honda Pilot When it comes to flat towing your 2006 Honda Pilot you will need the items listed below: The Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 1550-1 Roadmaster Falcon 2 Tow Bar # RM-520 Replacement Quick Disconnect Crossbar Assembly # 910021-00 Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-152-98146-7 Brake Buddy Select 3 Portable Supplemental Braking System # HM39524 Roadmaster 64 inch Single Hook, Straight Safety Cables # RM-645 I attached a review video...
view full answer... - Recommended Parts to Flat Tow 2020 Chevy Traverse Behind a MotorhomeWe can absolutely get you set up with all the parts you need in order to flat tow your 2020 Chevy Traverse. You will need base plates, a tow bar, wiring kit, and supplemental braking system, and the best parts that will fit are the following: - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-523200-5 - Tow Bar: Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar # RM-422 - Safety Chains: Roadmaster 80" Coiled Safety Cables # RM-653 - Wiring Kit: Roadmaster 4-Diode Universal...
view full answer...
- Tow Bar Wiring for 2018 Ford Edge SELThere is not a plug-in wiring kit available, but since there is nowhere to put magnetic lights on your 2018 Ford Edge SEL you will have to use a splice-in wiring kit. I recommend the Roadmaster 7-Wire to 6-Wire Kit # RM-152-98146-7. Please keep in mind that since your vehicle has variable voltage tail lights, two 50 ohm, 10 watt resistors will need to be purchased elsewhere for the taillight circuit to work correctly on both SEL and SE models.
view full answer... - What Base Plate Do I Need to Flat-tow My 2021 Jeep Cherokee Trailhawk With My MotorhomeThe base plate I recommend for your 2021 Jeep Cherokee Trailhawk is the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521451-5. I recommend this Roadmaster base plate because the Direct-Connect option makes it very easy to connect your tow bar to the base plate. You will also need a tow bar to link your motorhome to your Jeep Cherokee. The tow bar I recommend is the Roadmaster Falcon 2 Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lbs # RM-520. I recommend the Falcon 2...
view full answer... - Equipment Needed to Flat Tow 2021 Ford F-150 Raptor2021 F-150 4x4 models that have a neutral position in the transfer case are capable of being flat towed. You'll need base plates, a tow bar, safety cables, a flat towing wiring harness, a supplemental braking system and possibly a high/low adapter. For base plates, use the Demco tabless base plate, part # DM56MV. For a tow bar, I'd recommend the etrailer SD, part # e34ZR which is self centering and includes safety cables. For a wiring harness, the # RM-152-98146-7 diode system would...
view full answer... - Flat Tow Wiring for 2020 Hyundai PalisadeWhen using a car dolly, such as the Demco Kar Kaddy SS, # DM9713045, one generally uses the included lighting package for the indicator lights, plugging into the tow vehicles flat 4 plug or RV style 7-way. However, it is possible to use the same wiring harness for flat towing a vehicle instead, using vehicle indicator lights instead of the tow dolly's. Because they use the same tow vehicle/RV plug, it is one or the other. Since the 2020 Hyundai Palisade is not able to be flat towed, there...
view full answer... - Base Plate Kit for 2015 Kia Soul Manual for Flat TowingI recommend the Roadmaster # RM-522114-5 base plate We do not have an instructional video showing the installation of these baseplates. I have attached the installation instructions. Figures Q and V illustrate the areas requiring trimming. As with any base plate kit there will be some trimming. In this case it is an area around the honeycomb grill section. If you plan on flat towing these are the parts that you may need: 1. Base Plate Kit: Roadmaster # RM-522114-5 2. Two Bar: Roadmaster...
view full answer... - Parts to Flat Tow 2021 Jeep WranglerThe base plate kit can vary depending on the Jeep front bumper type. I am quoting parts based on the factory plastic bumper. If you have a factory steel bumper, Off road bumper with 3/4" D-rings or Off road bumper with 1" D-rings, just let me know so I can adjust the recommendation if necessary. For the base plate kit I would recommend the etrailer # e98948 Invisible Base Plate Kit with removable arms. I have attached a installation video for a 2020 Wrangler Unlimited to give you an idea...
view full answer... - Flat Towing 2021 Ford F-150 PlatinumFirst, your owners manual forbids recreational towing of a 4X2 truck. If you have a 4X4 then follow the guidelines in the manual. You will need a flat tow wiring kit. You mentioned the # RM-154. I recommend the Roadmaster # RM-152-98146-7 Universal wiring kit which includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter...
view full answer... - All Parts Needed to Flat Tow 2021 Jeep Grand CherokeeWe can get your 2021 Jeep Grand Cherokee set up to flat tow, and I'll make a list for you of all the parts that you'll need, which will include base plates, a tow bar, wiring, and a supplemental braking system. The exact parts for your '21 Grand Cherokee will be the following: - Base Plate Kit: Demco Tabless Base Plate Kit # DM9519291 - Tow Bar: Demco Dominator Non-Binding Tow Bar # DM9511008 - Wiring Kit: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire #...
view full answer... - Equipment Needed to Flat Tow 2021 Chevy Silverado 1500 If your 2021 Chevy Silverado 1500 is a 4WD model that has a two speed transfer case with a Neutral and 4WD Low setting, it can be flat towed. If its a 2WD or if it DOES NOT have a two speed transfer case, it cannot be flat towed and would need to be towed on a trailer with all 4 wheels off the ground. For base plates, I'd recommend the Roadmaster # RM-523199-5 which are compatible with vehicles that have tow hooks. For a tow bar, go with the Falcon All Terrain tow bar, part # RM-522. The...
view full answer... - Parts Needed to Flat Tow 2021 Ford Ranger with Blue Ox Tow BarYou'll need the Blue Ox base plate kit part # BX2679 which is a confirmed fit for your 2021 Ford Ranger and will work great with your Blue Ox tow bar like part # BX7420. This will also work great with your Brake Buddy like part # HM39530. You will need a lighting solution as well like with the # RM-152-98146-7 which allows your tow vehicle to control the Ranger taillights when you are travelling. I attached an install video for this for you to check out as well.
view full answer... - Parts Needed to Flat Tow 2013 Jeep Wrangler with Off Road BumperFor a base plate kit tow tow your 2013 Jeep Wrangler that has an off road bumper with 1 inch D-rings you'd need to start with the # BX88358 for a Blue Ox setup. Then for a tow bar you'd want the # BX7420 which is the easiest to use and allows the vehicle to track the best behind the coach. For lighting you'd want the # RM-152-98146-7. The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling...
view full answer... - Parts Needed to Flat Tow 2015 Jeep Wrangler Unlimited Rubicon With Smittybilt Bumper & 10 Inch RiseWe can get your 2015 Jeep Wrangler Unlimited Rubicon with a Smittybilt bumper set up for flat towing, including the correct high-low adapter to make up that large 10" height difference between the D-rings and your hitch. To make it easy, I'll create a list of the parts you'll need for your Jeep. - Base Plates: 3/4" Shackle Mounts: Adapter for Jeep D-Ring Bumper Mounts - 3/4" Thick # RM-035 OR - 1" Shackle Mounts: Adapter for Jeep D-Ring Bumper Mounts - 1" Thick # RM-035-1 - Tow Bar: Roadmaster...
view full answer... - Diode lighting Kit Needed For Flat Towing A 2020 Jeep Gladiator With LED LightsSince you have LED tail lights the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord Item # RM-152-98146-7 will not work. Instead you'll need the Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red Item # RM-152-LED-7.
view full answer... - Recommended Flat Tow Base Plate Kit For 2021 Jeep Gladiator MojaveFor your 2021 Jeep Gladiator Mojave I recommend the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM77VR which will only require you to cut a slot in the skid plate on each side as shown in the included cut out from the instructions, but will not require you to modify the bumper. The # RM77VR will pair up perfectly with the Roadmaster Falcon All-Terrain # RM-522 which is a very popular tow bar due to its non-binding arms that allow you to quickly and easily unhook your flat...
view full answer...
- What Versions of 2019 Jeep Cherokee Trail Hawk Can be Flat Towed behind MotorhomeYou can flat tow the 2019 Jeep Cherokee if it is a 4x4 model with 2-speed power transfer unit. Models with the 1-speed power transfer unit would have to be put on a trailer. None of the 2-wheel drive models can be flat towed but you can dolly tow front wheel drive models from the front. The reason for this is the 2WD models are front wheel drive so if you get the front wheels off the ground with a tow dolly like the part # RM-2050-1 you avoid the problems associated with flat towing. If...
view full answer... - Parts Needed to Flat Tow 2020 Chevy Silverado 1500 DieselI checked with Blue Ox and the # BLU54VR that you referenced does not have fit exclusions for the diesel engine versions of the 2020 Chevy Silverado 1500 so it would work great for your truck. The Avail Tow Bar part # BX7420 would be a great solution as well. The battery of your truck does need to be disconnected when flat towing it which is why the Roadmaster quick disconnect kit part # RM-766 is recommended as it makes this easier. Your current braking system would work great. For lighting...
view full answer... - Base Plate Kit for a 2017 Jeep Grand Cherokee Trailhawk 4WDI have a solution for you but there is no Blue Ox baseplate kit available for the 2017 Jeep Grand Cherokee Trailhawk 4WD. You will need to use the Curt Custom Base Plate Kit - Removable Arms item # C46JR. This base plate kit will work with Blue Ox tow bars without an adapter. To flat tow your Jeep you will also need: Roadmaster InvisiBrake Supplemental Braking System item # RM-8700. Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord item # RM-152-98146-7. Roadmaster...
view full answer... - Recommended Tow Bar Base Plate And Wiring Options For 2020 Jeep Wrangler UnlimitedThere are baseplate options that will work with factory bumpers, and certain off road bumpers but they will not work on both. For your factory bumper I recommend the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521453-5 which will work great with your Roadmaster Falcon All Terrain Tow Bar # RM-522. When you are picking a custom bumper I recommend picking one with 3/4" or 1" thick D-Rings which will allow you to use # RM-035 for 3/4" thick D-Rings or # RM-035-1 for 1"...
view full answer... - Recommended Flat Towing Setup For 2018 Ford F-150 Crew CabI would be happy to recommend everything you will need to flat tow your 2018 Ford F-150 Crew Cab with your 2016 Jayco Greyhawk 29MV. Starting with the base plate kit I recommend the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-524431-5 which will pair up perfectly with the Roadmaster Falcon All-Terrain # RM-522. The # RM-522 is one of our most popular tow bars due to the non-binding arms that allow you to unhook your tow vehicle quickly and easily even on un-even ground,...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
Expert Research:
Mike L
Expert Research:
Jameson C
Video by:
Zack K
Video by:
Kathleen M
Video by:
Shane H
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Rick G
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video Edited:
Jonathan Y
Video Edited:
John S
Written by:
Shelly K
Updated by:
Hannah L
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James
3/3/2023
no issues after 10K miles super happy with this product