bing tracking image
  1. Tie Down Anchors
  2. Brophy
  3. D-Ring
  4. Tie-Down Cleats and Rings
  5. 4000 lbs
  6. Trailer Tie-Down Anchors
  7. Truck Tie-Down Anchors
Brophy D-Ring Tie Down Anchor - Bolt-On - 2-3/8" Wide - Surface Mount - 4,000 lbs

Brophy D-Ring Tie Down Anchor - Bolt-On - 2-3/8" Wide - Surface Mount - 4,000 lbs

Item # LRB1
Retail:$12.73
Our Price: $11.85
You Save: 7%
Tie Down Anchors
Shipping Weight: 0.93 lbs
Add to cart
In Stock
Brophy Trailer Tie-Down Anchors,Truck Tie-Down Anchors - LRB1
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This durable steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The zinc-plated ring resists corrosion and bolts onto a flat surface. Includes mounting bracket. Great Prices for the best tie down anchors from Brophy. Brophy D-Ring Tie Down Anchor - Bolt-On - 2-3/8" Wide - Surface Mount - 4,000 lbs part number LRB1 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (116)
  • Q & A (0)
  • Photos

Brophy Tie Down Anchors - LRB1

  • D-Ring
  • Tie-Down Cleats and Rings
  • 4000 lbs
  • Trailer Tie-Down Anchors
  • Truck Tie-Down Anchors
  • Surface Mount - Bolt-On
  • Brophy

This durable steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The zinc-plated ring resists corrosion and bolts onto a flat surface. Includes mounting bracket.


Features:

  • Tie-down anchor provides a solid point to secure your cargo with straps or bungee cords
  • Surface-mount design does not require you to cut a hole in your trailer or truck bed
  • D-ring rotates 180-degrees so you can attach straps from multiple angles
  • Zinc-plated steel construction resists corrosion and retains its strength through repeated use
  • Simple, bolt-on installation to flat surface
    • Mounting hardware not included


Specs:

  • Maximum load (break strength): 11,700 lbs
  • Working load limit: 4,000 lbs
  • Ring diameter: 1/2"
  • Internal ring dimensions: 2-3/8" wide x 2-1/2" tall
  • Dimensions: 3-1/2" wide x 3-3/8" tall
  • 1-Year limited warranty


Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.


Surface mount trailer d ring

LRB1 Brophy Zinc Plated Lashing Ring Tie Down - Bolt On - Surface Mount - 4,000 Pounds





Customer Satisfaction Score:


Customer Reviews

Brophy D-Ring Tie Down Anchor - Bolt-On - 2-3/8" Wide - Surface Mount - 4,000 lbs - LRB1

Average Customer Rating:  4.9 out of 5 stars   (116 Customer Reviews)

This durable steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The zinc-plated ring resists corrosion and bolts onto a flat surface. Includes mounting bracket.

by:

They are very sturdy and bigger than they look in the picture. Hopefully they’ll do the job but I think they will.

Christopher

11/29/2023

They have been great at holding large equipment in place on the trailer. I’ve been pleased with my purchase and I always like dealing with etrailer. They always answer your questions and give good advice.



by:

The pictures of these don't do them justice. They are larger than they look on the website. I'm using 4 of these to secure my Jeep to my trailer. I would have given 5 stars but there seems to be a dimensional issue if you use 3/8" carriage bolts. The bolts cannot seat fully into the square hole because the hole is to close to the curved portion that holds the d-ring in place. This doesn't affect the function but does hurt the appearance of the finished product.



by:

Got these to add to the bed of my truck for more tie down spots for 4 wheelers and my sons dirt bike. Attached to my tool box and they work and fit great!!!

Cliff W.

6/19/2015

Great!!! Helps out a lot tying things down.



by:

Easy to install, never rusted, never broke with multiple trips of tying down cars and light pickup trucks. Great bang for buck!



by:

Wow these things are serious, heavy duty D rings. The D ring is big, in case that's a factor for your setup. These will do great in my trailer. etrailer's notifications were outstanding every step of the way, excellent packaging.

Monsterp

2/4/2015

Heavy duty and not messing around. Great product that you dont have to ever worry about as long as you secure them right. Excellent.



by:

Used these as tie downs for my UTV on a snowmodile trailer. Works well.

Kirk H.

9/16/2017

Excellent after a year



by:

Great for making easy access tie downs on trailer deck.

Ryan R.

3/20/2018

Everything is working great. Your parts helped me put a nearly new, yet fender-bendered, trailer back together for a very reasonable price. It rolls down the road great!Ill probably be contacting you all again in the near future for a wiring harness for a trailer brake controller on my new-to-me F250 when the weather finally decides to dry out a bit!.



by:

Great quality. Install 6 on my 5x10 utility trailer with a wood deck. Used 3/8 x 2 1/2 inch Carriage bolts.

Steve T.

10/16/2013

Steve, I have the same application 6x10 wood floor. Where did you mount these beauties, on the outside of the frame rails? Or did you go thru the floor into the angle pieces holding the floor?No experience in this, just dont want my 49 Allis Chalmers to fall off!Thanx Bruce Bower

Patrick B.

10/18/2013

Going to the siderails can make securing a car more challenging than it needs to be. Going to the deck of the trailer would be easier. Check out part RR5K. It will make the install a little bit cleaner as they tie-down points are recessed. The backing plate is included too for use with wood decks, and it even has a 5K working load limit.


by:

Nice addition to my trailer to haul my SxS. My trailer didn’t come with any tie down points. Another bonus with these is adding tie down points exactly where you want them on the trailer that works best for your application.



by:

This was an 'after thought' for my 'newer' recently purchased truck. I needed more tie-down capability for other 'Toys' in the bed of the truck. These made perfect sense after I found two flat spots in my fiberglass bed liner. So once the Headache Bar, I bought from etrailer, is firmly in place with these tie-down loops, and the Off-road 'toy' of choice is snug in the bed. I will certainly be off to the 'dirt'! Thanks to all at etrailer!



by:

The tie downs I received were bigger and better than what I expected I used grade A bolts to anchor to the floor of our trailer that halls ranch/farm equipment. These tie downs won’t break. Great product and a great price and yes I recommend this tie downs. Retired 2



by:

Hefty tie down anchors. I was going to weld or bolt/weld 4 of these onto my lightweight folding trailer for motorcycle transport, but I'm quite sure a couple of sturdy bolts, lock washers, and nut should do the trick. Anyone know the correct carriage bolt size to securely fit square holes?



by:

I ordered 8 heavy duty bolt tie downs for my two trucks. After they arrived, I took a free day to install them. Well into the project, I discovered that I had only 7 bolt tie downs and one that has to be welded, which I cannot use. Being a little more conscientious when putting the order together would have saved me a lot of time in calling, returning the wrong part, waiting for a new one and then hauling out the tools again.

As for the correct tie downs and the ratchet straps I ordered, they are excellent quality and I would recommend them.



by:

I under estimated the size of this thing, and the fact that it holds 12,000 lbs (stamped on it), but I got exactly what I ordered. I shouldn't have a problem holding my boat down with them (or picking it up)

Etrailer Expert

Laura E.

12/15/2016

Thanks for your business and your review, Billie. As a precaution, tie-down anchors must be chosen according to their safe working load limit WLL. The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.



by:

Seem very heavy duty. Installed with 3/8 inch carriage bolts to trailer flooring. As advertised. Very quick turn around from ordering to receiving order.



by:

I would not ever consider buying tires anywhere else than etrailer. Your 5 star tires,service and follow up are wonderful.



by:

Excellent product. I was half expecting something smaller...i'm glad it wasn't! The brackets were mounted to the sides of my car trailer deck, which allowed for extra tie down points.



by:

Like the other reviews state, these things are hefty. The Box was about 3lb for two of them. We will use them for the first time in a couple weeks, but they appear legit. Also, we got 3/8 carriage bolts so they can be flush with the bracket.



by:

They look the same and they are Solid! I Use them to hold down my dirtbike. Great buy. 2006 Frontier SE4X4



by:

Great.....On all of my orders. First the etrailer web site made it so easy to place my order. It was then processed fast, and to finish up my multiple orders were shipped and recieved in just a couple days. Excellent Excellent Excellent.



by:

It was a lot bigger than I expected and not what I was looking for...but we will be using it with my husband's motorcycle repair shop trailer. :-)



by:

I didn't realize how big these were from the picture. These look like they are for tying down cars. I just need them to tie down motorcycles so I used something smaller and lighter.



by:

Very good and sturdy. Not like the cheap ones you get at your local hardware store



by:

Thanks Much, just got in from installing everything I ordered and it
all went on nicely. I rebuilt a 6' X 12' 1999 utility trailer
with treated lumber etc..........plus your parts, looks great. Thanks
again, going to do the same for another utility trailer I have, a
6' X 10, so, I'll be ordering from you later in the summer. Thanks
again



by:

Just great company to work with. Fast shipping. Excellent product. Absolute no need to worry when you order from etrailer.com.


25
116
Show More Reviews

See what our Experts say about this Brophy Tie Down Anchors

  • Method to Secure 2012 Scion iQ in Toy Hauler Trailer
    If your transport is a one-time or occasional event you might consider a pair of basic rubber chocks like the # 337WC8127 for stabilization along with a cable lock to secure the vehicle by its axle. We offer the Master Lock Quantum Self-Coiling, Combination Cable Lock - 1/2" Diameter x 6' Long # 8122D that is 6-feet by 1-3/16-inches thick. This could wrap around an axle and be secured to a simple bolt on D-ring like # LRB1 (hardware is not included). This arrangement would allow the cable...
    view full answer...
  • Tie Down Anchor Recommendation for Alumna Trailer
    Sounds like you are looking for D-Ring Tie Down anchors like the part # LRB1 which would get bolted to the floor of your trailer and has a 4,000 lb capacity. I attached an install video as well.
    view full answer...
  • What Size Bolts Should be Used to Mount the Trailer D-Ring Tie Down, # LRB1
    I went out to the warehouse to measure the square holes in the Trailer D-Ring Tie Down, # LRB1. According to my measurements it will accept bolts no larger than 7/16 inches in diameter. A 3/8 inch bolt would probably be the most ideal size to use.
    view full answer...
  • Best Tie-Down Recommendation for a Pine Wood Floor Flatbed Trailer Carrying Motorcycles
    I think installing the Recessed Trailer D-Ring, # RR5K, that you have referenced, would be better than # LRB1, because the backing plate is going to help distribute the load from the ring which would be better for your wood decking and make for stronger connection points. If you use this kit with the backing plate an attachment to the frame is not required as the backing plate, which would be underneath the wood floor, would prevent the hardware from pulling out. The only down side to...
    view full answer...
  • Construction of and Attachment Method for CR Brophy # LRB1 Tie-Down Ring
    The CR Brophy # LRB1 features a zinc plated ring. I suppose the ring could be welded into place, but the only way the 2,750 lb WLL can be maintained is by installing it by bolting it into place, as the manufacturer intended. Installing it in any other manner would have an unknown effect on the weight bearing capacity of the D-Ring Tie Down. If you decide to attempt welding a zinc plated item, be sure to do so in a well-ventilated area, as galvanized or zinc plated items can give off toxic...
    view full answer...
  • Could the Brophy D-Ring Anchors part # LRB1 Get Welded to Trailer Frame
    You definitely could weld the Brophy D-Ring Anchors part # LRB1 to your trailer frame if you wanted to install them. You would just want to make sure that you are in a well-ventilated area as these are zinc coated. I attached an install video for you to check out that shows them getting bolted on as well.
    view full answer...
  • What Finish Does the Trailer D-Ring Tie Down # LRB1 Have
    The Trailer D-Ring Tie Down # LRB1 that you referenced has a zinc finish to prevent corrosion. Check out the review video I attached as well.
    view full answer...
  • Frame Mounted Forged D-Ring Tie Downs on Big Tex 70 Steel Car Trailer
    I can absolutely help you and make a recommendation. The floor of your Big Tex 70 car trailer is an 1/8 diamond steel plate. The 1/8 plate will be fine for a tie down point for anything but a car. You need a bracket not to fasten something down tight but to keep your car from moving. The rolling resistance would be too much for an 1/8 plate but sufficient for any type of other loads, like lumber, drywall, trash, pipe etc. You're going to need to drill into the frame to safely secure mounting...
    view full answer...
  • Can Brophy D-Ring Tie Down Anchor Be Mounted to Trailer Frame
    You can drill into the frame to mount the Brophy D-Ring Tie Down Anchor # LRB1 to the floor of your trailer. If it is a steel frame I wouldn't worry about it, if it is an aluminum frame I would try to avoid it. However, I recommend using a steel backing plate to avoid drilling into the frame entirely. This will be more than enough to keep the tie down secure.
    view full answer...
  • Width of the Mounting Bracket for the Brophy D-Ring Tie Down Anchor # LRB1
    I went out to the warehouse and found that the width of the mounting bracket for the Brophy D-Ring Tie Down Anchor # LRB1 measured 1-3/4". I have attached a photo with the dimensions listed for you to check out.
    view full answer...
    Image 1 for
  • Mounting Hole Diameter of Brophy D-Ring Tie Down Anchor # LRB1
    Sounds like you are asking about the distance between the mounting holes of the # LRB1, which is 2 inches, or the diameter of ring it is designed to fit which is 1/2 inches.
    view full answer...
    Image 1 for
  • Tie Down Anchor Recommendation for Trailer That Has 3/4 inch Depth Restriction
    I have a solution for you, but the part # RR5K would stick down too far for the hole you have that only can fit 3/4 inches of depth. For a similar rated tie down anchor that surface mounts instead you would want the part # LRB1 which has a 4k capacity. I attached an install video for you to check out as well.
    view full answer...
  • Recommended Bolt-On D-Ring for Retaining Ring on Trailer Tongue
    For your retaining ring mounts on the trailer tongue, I recommend using the Brophy D-Ring Tie Down Anchor - Bolt-On - 2-3/8" Wide - Surface Mount - 4,000 lbs # LRB1. This is the strongest bolt on option we have. Anything stronger would require welding.
    view full answer...
  • Pull Rating for the CE Smith Tie-Down Bracket for Trailers # CE26214G
    I spoke with my contact at CE Smith and unfortunately they do not have a pull rating for the tie-down bracket # CE26214G. However, he did say that because the brackets are 7 gauge steel, 2 inches wide you should have no problems securely tying down a full-sized ATV to your trailer. I have included a link to a video showing the dimensions of the brackets. A second option would be the Brophy Utility Trailer D-Ring Tie Down # LRB1 which has a 1/2" ring diameter and measures 2-1/2" x 2-3/8"...
    view full answer...
  • High Capacity D-Ring Recommendation for Enclosed Trailer
    Your best solution will be the # LRB1. This D-ring anchor has a 4,000 lb working load limit, has mounting holes that are in line and has a continuously welded D-ring. I attached a review video for you to check out as well.
    view full answer...
  • What Size Mounting Hardware is Needed for Trailer D-Ring Tie Down # LRB1
    According to my measurements the mounting holes on the Trailer D-Ring Tie Down, # LRB1, will accept bolts no larger than 7/16 inches in diameter so you could go with a 3/8 inch bolt/nut or screw. You can just use standard hardware which can be obtained from your local hardware store. We do not offer any hardware for these tie downs.
    view full answer...
  • Safety Chains and Cargo Tie Downs for 6 x 10-Foot Flat Deck Utility Trailer
    Thank you for the photo of your utility trailer that appears to already have safety chains installed near the coupler. Safety chains should be selected based on trailer weight and on the length you need. If your trailer has a 3500-lb-rated axle then chains like 60-inch 5K Curt part # C19749 would provide sufficient capacity and their latching hooks will make for easy attachment. If you prefer shorter chains you might prefer the 27-inch 5K # 2118-605-04. For a weld-on bracket you might...
    view full answer...
    Image 1 for
  • Choosing D-Ring Cargo Tie Downs for Toy Hauler Trailer
    We offer D-ring tie down products with working load limit (WLL) ratings from 330-lbs, as with the Brophy # SR10-C, up to more than 15,500-lbs, as with the weld-on Curt D-ring # C83780. The Brophy D-ring # RR01-C you referenced has a WLL of 400-lbs, half of what you need to match your other D-ring, if it is indeed rated for 2500-lbs breaking strength. Note that such parts carry two types of ratings, a breaking strength and a working load limit (WLL). Straps and anchors must be selected...
    view full answer...
  • Recommended Tie-Down Straps for Transporting TrailBlazer and Traverse on Car Hauler Trailer
    The Erickson Ratchet Tie-Down Strap with Web Clamp and Snap Hooks, part # EM58501 that you referenced, is suitable for your application to secure a vehicle to your flat car hauler trailer by its tow hooks, but we also offer shorter straps like their 7-foot Car Tie Down # 58503 which also has hooks on both ends. To use either of these you'll need tie-down hooks on the deck of the trailer. If you need D-Ring tie downs you can use # LRB1 from Brophy. If you prefer you can use 4 axle straps...
    view full answer...
  • Availability of 2-3/8 inch Wide Anchor D-Ring
    For a D-ring that is overall 2-3/8 inches wide you would want the part # LRB1. I believe that is the dimension you are looking for. I attached a review video for you to check out as well.
    view full answer...
  • Can Curt D-Ring Tie Down Anchor Be Welded to Aluminum Trailer
    I have a solution for you, but it is not easy to weld steel to aluminum. The Curt D-Ring Tie Down Anchor # J-705 is made of raw steel. It will not work well to weld on to your aluminum trailer because of the differences in the melting points of these metals. All of our weld-on D-rings are made of steel. A skilled professional welder may be able to weld the # J-705 to your aluminum trailer. Your best option will be to use a bolt-on D-ring, like the Brophy D-ring Tie Down Anchor # LRB1....
    view full answer...
  • Availability of D-Ring Trailer Cargo Control Tie Downs
    We offer D-ring tie downs like the bolt-on Brophy # SR15-C and the weld-on Curt # J-705 that can be seen on the linked page. For one close to your measurements you might consider the Brophy # LRB1 which is also a bolt-on part whose dimensions are shown in the linked photo.
    view full answer...
    Image 1 for
  • Recommended Way to Install Heavy Steel D-Ring Tie Down to Aluminum Floor of Car Hauler
    Using a piece of plywood between the aluminum will not hold up as well because the wood will start to weaken and will rot over time. The best way to install the trailer D-Ring Tie Down Mount, part # LRB1, to the aluminum floor in your car hauler would be to mount it through the frame of the trailer if possible or using a steel backing plate would suffice. It would probably be good to use some sort of gasket material between the aluminum and the steel to prevent any oxidation or reaction...
    view full answer...
  • Installing Brophy D-Rings on OSB Trailer Flooring
    When used along with a steel backing plate, the Brophy D-Ring Tie Down Anchor # LRB1 that you referenced should offer enough support to provide a safe anchor point on the wooden T-Grade OSB flooring on your trailer. With that being said, a better option might be with the Brophy D-Ring Tie Down Anchor w Backing Plate # RR5K for your application, as it features a larger surface area on the D-Ring mount to better disperse weight and also includes the backing plate for installation. It has...
    view full answer...


< Previous
12



Do you have a question about this Tie Down Anchor?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Hayden R
Installed by:
Hayden R
Employee Wilson B
Updated by:
Wilson B
Employee Jacob W
Updated by:
Jacob W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.