Lippert Manual Pull-Out Step for RVs - Double - 7" Drop - 24-1/4" Wide - Steel - 300 lbs
(615 reviews)
Price: $140.25
In Stock
Lippert Manual Pull-Out Step for RVs - Double - 7" Drop - 24-1/4" Wide - Steel - 300 lbs
Item # LC432682
Retail:$236.94
Our Price: $140.25
You Save: $96.69
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (615)
- Q & A (0)
- Photos
- Used (1)
Lippert RV Steps - LC432682
- Pull-Out Step
- Towable Camper
- 2 Steps
- 24 Inch Wide Step
- Lippert
- 7 Inch Drop/Rise
- Steel
- 25-1/2 Inch Wide
- No Ground Contact
This 8-1/4" deep, double pull-out RV step opens and closes with just 1 hand. Anti-skid tread tape and water collection channels on step surface provide safe entry and exit. Bolts or welds onto your RV frame. Rust-resistant black powder coat.
Features:
- Manually operated RV steps make it easy to get into and out of your motor home
- Simply pull steps out for use and position back in place for travel
- Non-skid and slip-resistant step design
- Tread tape provides sure footing
- Water channels and drain holes help to keep rain from pooling
- Grab handle eases use and keeps hands clear of moving parts
- Black powder coated steel is sturdy and rust resistant
- Easy bolt-on or weld-on installation
- Mounts to RV frame in same manner as original step
Specs:
- Entry height: 21-1/2" - 24-1/2"
- Step dimensions: 24-1/4" wide x 8-1/4" deep
- Mounting bracket dimensions: 25-1/2" wide x 9-3/4" tall x 12" deep
- Drop/Rise: 7"
- Weight capacity: 300 lbs
- 1-Year warranty
Will Lippert Pull-Out Steps Work for You?
Pull-out steps are typically installed on travel trailers. The pull-out steps from Lippert are easy to install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
The Lippert pull-out steps attach the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. You will need a mounting space that is at least 25-1/2" wide and 12" deep.
If it turns out you have more or less space beneath your doorway, there are other step assemblies available with bracket sizes ranging from 25-1/2" wide to 28" wide. A full list of the available steps is below.
Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.
Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 6" to 9" to account for the drop from the bottom step to the ground. This measurement will also tell you how many steps you need.
The chart below displays entry height measurements in the first column. If you determined you need a 25-1/2" mounting bracket, the step part numbers with that width are in the second column. If you determined you need a 25-3/4" mounting bracket, the step part numbers with that width are in the third column. The steps for 27-1/2" mounting bracket widths are in the fourth column, and the steps for 28" mounting bracket widths are in the fifth column. Choose the bracket size that is closest to your measurements without going over.
This page's step assembly is in bold text.
| Entry Height | 25-1/2" Mounting Bracket Width | 25-3/4" Mounting Bracket Width | 27-1/2" Mounting Bracket Width | 28" Mounting Bracket Width |
|---|---|---|---|---|
| 14-1/4" - 17-1/4" | Not available | LC432678 | Not available | Not available |
| 21-1/2" - 24-1/2" | LC432682 | Not available | Not available | Not available |
| 24-1/2" - 27-1/2" | Not available | Not available | LC432687 | Not available |
| 31" - 34" | Not available | Not available | LC432696, LC432690 | Not available |
| 36-3/4" - 39-3/4" | Not available | Not available | Not available | LC432698 |
How Do You Install the Steps?
To install the steps:
- Make sure the camper is level on flat ground
- Lift the steps into the mounting space and prop into place
- If needed, mark the mounting holes on the camper and drill
-Set aside steps before drilling
- If needed, install the outriggers
- Align step mounting holes and secure in place with bolts and flange lock nuts
-Make sure the bracket is backed up fully against the I-beam on the chassis
-Hardware not included
- Tighten hardware until snug
- Make sure assembly is sitting square and level
- Torque the hardware to 20 ft-lbs
432682 Lippert Components (LCI) Double Radius Entry Step
Similar to Hickory Springs 952240RFXWAC1, 95224EXTALC1, and 982240RFXWC1
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Lippert Manual Pull-Out Step for RVs - Double - 7" Drop - 24-1/4" Wide - Steel - 300 lbs - LC432682
Average Customer Rating: 4.8 out of 5 stars (615 Customer Reviews)
This 8-1/4" deep, double pull-out RV step opens and closes with just 1 hand. Anti-skid tread tape and water collection channels on step surface provide safe entry and exit. Bolts or welds onto your RV frame. Rust-resistant black powder coat.by: Mary 05/12/2023
Delivered on time. Had to adjust the back brackets because the holes did not match. Overall it looks like a quality product and is now on the trailer.
by: Paul K02/27/2023
The new set of dual steps looks great-- i was re-fitting my single step on a Salem Forest 2002- with a new set of steps-- It is your product on the trailer form the factory marginally. The bolt patters is a bit different so I will have to drill the attachment plate to the new holes in the new set of steps. It woudl be nice to include cut out drilling pattern to go along with a the steps. Otherwise very happy with this set of steps an the retrofitting.
Paul K.
2/29/2024
The steps are working out just fine. Happy with their use. The installation and product did not come with instructions. a Re drill pattern woudl have been nice. I had to hold it up and mark the one drill hole and then go to Lowes and get new stainless carriage insulated bolts. overall the lower step seems a bit weak- Im considering purchasing accompanying hinged supports that fold down when the steps are down for added support. If i woudl suggest a change in production make the lower step thinker metal- so it doesnt feel so flimsy.
Mike L.
2/29/2024
@PaulK We'll pass that along to the folks at Lippert!
by: D. Funk05/17/2023
A little more work than I expected to install, but if you need an extra step, it’s worth it. Nice and sturdy product. A few light scuffs right out of the box, but the paint does seem thick and durable.
Went from a single 16” step up to an easier 9” then only 5” after. Really needed it for my wife after her recent back surgery, and it should be easier for my son once he starts walking.
The extra work had me drill the “outriggers” because this set was 1/2” wider than my factory set. I’d have to guess my factory set is some nonstandard brand. Trailer is a 15’ Forest River Wolfpup 16BHS.
by: Kirsten02/14/2023
Love this pull out step! Replaced our bulky steps that fold up inside the trailer (and track dirt and get in the way) with this handy little step. It's super-sturdy and easy to collapse and pull back out. Had them on for a year now and no rust or corrosion even though camper is parked outside.
by: James03/04/2023
Original step to 2016 23RB Jayco Jayflight broke. Bought this step to replace. Installation was perfect with no issues. Took about 10 minutes. All mounting holes of the new step aligned to original trailer brackets with no issues. Even was able to use the original hardware. This newer step is definitely better built than the original. Looks good!
by: Steven 12/20/2023
These steps are a perfect replacement for the original steel steps on our2006 Safari Airstream trailer. They bolt in without modification to the steps or the trailer.
by: Tzar Igor10/19/2023
Fits perfectly on our Lance 1685 travel trailer after removing the damaged steps. Removing the damaged steps was 95% of the work since cutting huck bolts with a hack saw in a cramped space is a PITB. The original steps were damaged and bent after we snagged them several times dragging our trailer over rough terrain (they were folded up, but still hang too low).
by: Airstream Replacement10/10/2023
Replaced the steps on my 2015 20 ‘FB flying cloud airstream. EXACT fit ! Fast shipping. Great communication
by: Tim04/16/2022
These steps were very simple to install. They are good quality, feel and look sturdy. These replaced steps that were broken on one side. Good deal for the price. Their customers ordering and service was great.
Tim
4/17/2023
They still continue to work well for me.
by: Jim W09/04/2023
It was easy to find exactly what I needed on eTrailer.com. As usual, the price was as good or better than anywhere else. The stairs arrived on time and they fit my Kodiak 186E perfectly, using the same bolt holes as the old stairs. Easy to install if you have a floor jack or jack stands to hold them in place while you put the carriage bolts in. Simpler design than the old stairs. I like the grab handles underneath.
by: Don10/09/2023
Great product, less than an hour to install both front and rear doors.
by: Bill N04/19/2019
I have a 2017 RPod 180 and needed to change the one step to two steps after my wife’s knee replacement this past month. This part seemed to match closer to the current 25 7/8” width of the existing step. These steps are 25 1/2” so needed a few washers to space out. I replaced the 3/8” carriage bolt from 1” long to 1 1/2” long on one side. Reused the original on the other side. To fit this in the space I had to notch the steps at the back to fit around the frame beam. No impact on function. The steps were not fitting up to the current intended notch so I added another notch to lock them in the new position. I set the steps all the way up against the frame. This minimized the reduction in ground clearance as well as reducing the top step rise. It did require drilling new holes in the original supports. Ground clearance is ~9”. Was 10”.
by: Vincent 06/03/2024
Received it fit perfect and had it installed in half hour
by: David06/27/2020
Great fit works as described very fast shipping
Will purchase futher parts from etrailer
David
6/28/2021
Great no rust steps are looking as new as when delivered
by: Mike10/11/2023
Well made, simple install, although a floor jack is recommended to install.
by: Vicki 07/14/2023
We had difficulty installing all four bolts necessary on the steps. By standing on our heads and working upside down, we were finally able to get them in place. We used a bottle, jack and a piece of wood to help hold the steps in place while we positioned the bolts correctly before tightening.
by: Glenn 09/14/2023
I needed different set of steps.Easter to get into my camper.the steps work good as we speek.so for so good.
by: C. Moore08/03/2023
Super fast shipping, very easy to find what I needed, my husband (not super handy) put it on with minimal swearing. It would have cost us 4 times as much to take it somewhere and have the stair repaired. Will certainly use etrailer again. Stair was damaged when we drove into a puddle hiding a HUGE pothole. Thanks for the outstanding product/service.
by: Paula 07/18/2023
Bought these for my 2015 Forest River travel trailer. Excellent ship time, received in a few days. They were a little snug when installing but after the installation was complete were perfect. They seem very sturdy and well made.
by: Michael 02/21/2024
Just what I needed. I needed to shim both sides but it wasn’t an issue. Thanks!
by: Tom 08/25/2022
This item is being installed in a unique type of configuration and photos will be comming later as the camper and truck are out for paint. I think it wll be a first time istallation.
Tom
8/29/2023
Works and fits well very good product !!!
by: Rick09/06/2023
Stairs came on time and packaged well. Very easy installation and took about half hour.
by: Richard 02/11/2024
Easy to install. Very strong and sturdy. Doesn't move when being used!
by: Jim 06/18/2023
Two steps are exactly what I was looking for for my small trailer
by: Craig 06/20/2023
Bolted right to keystone passport trailer
Fast shipping
Great to do business with
25
614
Show More Reviews
See what our Experts say about this Lippert RV Steps
- Side Hole Spacing of Lippert Manual Pull-Out Step for RVs LC432682The side mounting bolt holes measure 7 inches apart on center for the Lippert Manual Pull-Out Step for RVs - Double - 7" Drop - 24-1/4" Wide # LC432682. From the bottom of the bracket to the bolt holes it is 9 inches, or from the top to the bolt holes it is 3/4 of an inch. If needed, you can also install them using Lippert Outriggers for Manual RV Steps # LC301704. And for mounting hardware use Mounting Hardware for Lippert Electric and Manual RV Steps # LC118155-72.
view full answer... - What Double Step do you Recommend to Replace my Single Step on my Wildwood 241QBXLI have a really good solution for you but it's slightly different than your current steps and a great upgrade that folks love. SInce the distance is so short with a single step there really is not enough room for them underneath. Instead I recommend the SolidStep Manual Fold-Down Steps part # LC733931 these are designed for door frame widths between 26" & 29-7/8" and entry heights between 22" - 28". You'll have to double check you fit into these measurements but I believe you do. Check...
view full answer... - What is the Width of the Lippert Manual Pull-Out Step LC432682The 27-1/2 inch measurement is a diagonal measurement from the front of the mounting surface to the front of the bottom step when it is pulled out. The 25-1/4 inch measurement is the overall width. The mounting holes are 24 inches apart on center.
view full answer... - Are New Mounting Brackets Required to Install Double Step on RV in Place of Single StepThe single step RV steps do have smaller mounting dimensions so if you are wanting to go with a double step to replace what you have what you'd need is the Lippert Manual Pull-Out Steps # LC432682 which is a double step that has a foot plate that provides solid traction. Since the mounting brackets of your RV are going to be too small you'll need outriggers too to go with this as part # LC301704 and you'll be set.
view full answer... - Replacing Auto Steps With Manual Steps on Forest River RVThe steps you need are going to depend on some measurements you'll need to take; as for the installation, each of these can be either bolted on or you can have a professional weld them on. The right step for you is going to depend on the amount of length you have from your doorway to the ground, as well as your current mounting base dimensions, which need to match up in order to get a secure fit. The Lippert Manual Pull-Out 2 step # LC432682 has mounting base dimensions of 25-1/4" wide...
view full answer... - Recommendation for 2 or 3 Step Assembly with 25-1/4 Inch Wide Mounting BaseI went out to the warehouse to take a look at the Flexco Manual Pull-Out Steps # SMFP-2100 referenced in your question. I actually found that the mounting base on this unit measures 27-5/8 inches wide, so it will be too large to fit between the welded on brackets you mentioned having on your trailer. I instead recommend looking at the Lippert Manual Pull-Out Step # LC432682. This two step assembly does indeed have a mounting base of 25-1/4 inches wide and 8-3/4 inches deep. It features...
view full answer... - How to Determine if Lippert Pull-Out Steps 432682 Will Work as ReplacementWe can help you figure out if the Lippert Manual Pull-Out Step for RVs # LC432682 will work as a replacement for you, though we have no way of researching if they will fit your '17 Jayco because we do not have access to a complete list of parts for each trailer made. What I can tell you is that to find out if these steps are going to fit you will just need to measure to ensure you have enough room for the mounting bracket to fit. The Lippert steps you referenced have mounting brackets...
view full answer...
- Replacement Steps For Wolf Pup Travel TrailerThe Wolf Pups sit pretty close to the ground. You are likely at the cusp of 2 steps is not enough and three steps may be too many. To measure for replacement steps, first measure the "entry height" which is the height from the ground to the top of the steps mounting flange. Then measure the inside width of the bracket that holds the steps. If the inside width of your steps mounting bracket is 25-1/2", and your entry height is 18-1/2" to 28", then the TorkLift # TLA8003 will be a good...
view full answer... - Replacement RV Step for 2015 Coachmen Apex 239RBSBased on your dimensions the Lippert Manual Pull-Out Step for RVs # LC432682 would be what you would need. This would fit and work great on your 2015 Coachmen Apex 239RBS.
view full answer... - Can Single Step of Winnebago Access Chalet Be Replaced by Double StepA double step can replace a single step but typically the widths are different. Worse case scenario you can move the brackets or install new outrigger brackets but it's very doable. Do you know what the width of your current steps is? A very common double step is the part # LC432682 which is 25-1/4 inches wide which is a very common width. For outriggers then you'd want the part # LC301704 if your current brackets aren't the correct dimension
view full answer... - 2 Step Pull Out Recommendation for a 2016 Wildwood Forest River CamperYour 2016 Wildwood camper was made by Forest River which typically uses Lippert frames, so the Lippert pull out steps part # LC432682 should work well for you. However, you can measure your current steps and compare them to the dimensional pictures I attached to see if they would fit.
view full answer...
- Is There a Folding Double Step That is 24-1/4 Wide x 8-1/4 DeepThere is a folding double step that has the same 24-1/4 inch wide x 8-1/4 inch dimensions as the Lippert Manual Pull-Out Step for RVs - Single # LC432678; the step you are looking for is the following: - Lippert Manual Pull-Out Step for RVs - Double # LC432682 I have added a link below to a video review for you to check out as well if you'd like to take a look.
view full answer... - How Can I Tell What RV Steps Will Fit My 2006 Airstream International Travel TrailerIf your 2006 Airstream International has an entry height of 21-1/2"-24-1/2", and a mounting place that is at least 25-1/2" x 12", then the Lippert Manual Pull-Out Step for RVs # LC432682 will fit great. To find out whether or not this will work for you, you will need to measure your door frame's width and depth, as well as from the mounting point to the ground. The entry height measurement should match the height of the steps when extended, plus 6"-9" for the drop from the bottom step...
view full answer...
- Recommended Pull Out Steps for a Travel Trailer There's no parts list for what's on your trailer so I will need two measurements that you can email back to me at your convenience. The first is the width of your doorway. The second measurement is how far is the floor of the entry way from the ground. The Lippert Manual Pull-Out Step for RVs item # LC432682 you were looking at fits a doorway that is 24-1/4" wide and works with a entry height of 21-1/2" - 24-1/2". This is pretty basic step that folds underneath a trailer. If you are looking...
view full answer... - Replacement Manual Step for 2005 Jayco Greyhawk Class CWe do not have a database that tells us what steps are on your 2005 Jayco Greyhawk Class C, but the Lippert Manual Pull-Out Step for RVs # LC432682 are 24-1/4" wide, so as long as your door opening is around that size these would be a good option. These can either be welded or bolted onto your trailer frame, and they should be relatively easy to install. With that said, I recommend instead going with the SolidStep Manual Fold-Down Steps, which are a 2 step setup designed for entry heights...
view full answer... - RV Step Recommendation that is 25-1/2 inches Bracket Width and Door that is 24 inches From GroundWe have what you are looking for with the part # LC432682. This has a bracket width of 25-1/2 inches like you need and was designed for doorways that are between 21-1/2" - 24-1/2" from the ground.
view full answer... - Availability of RV Replacement Slide-Out Steps with Step-Up Height or Rise Shorter than 8 InchesWe do have a manually operated pull-out step, part # LC432682, a 2-step unit that features a 7-inch rise between steps. This might be a better choice and hopefully the 1 inch difference will make a difference for your wife. There is also a 3-step unit, part # LC341501 that also has a 7-inch rise between steps. To determine which unit you need, measure from the mounting surface where the steps would attach down to the ground, and compare that distance with the total height of each unit...
view full answer...
- Outrigger Recommendation for Installing Double Step on Coachman Clipper 17BHSYour dimension of 26-3/16 inch is not a standard dimension that we'll have a direct fit for but you can use the outriggers # LC301704 once you remove the old brackets to install new steps at dimensions that match what you need. With those you could install a double step like the part # LC432682 and you'll be set. These are the standard 25-1/2 inch in width.
view full answer... - 2014 Coachman Clipper 17BH Double Step RecommendationI looked up a couple pictures of your 2014 Coachman Clipper 17BH and it appears to have the Manual Pull Out Step which is a pretty standard step like # SMFP-1100. Like most single steps this has a narrower mounting bracket width than double or triple steps. Yours in particular has a 26 inch width. The good news is we have a double step # LC432682 that will fit well and require minimal spacers.
view full answer...
- Availability of Pull Out RV Steps That Are 25-1/4 Inches WideLippert components offers a 2 step unit with a 25-1/4 inch overall width, with the bolt hole spacing being 24 inches on center, side to side and 7 inches front to back on center. The part number is # LC432682.
view full answer... - Recommendation For 3-Step Unit That Fits 25 1/4" Mount On 2018 Forest River Flagstaff Camper I contacted the manufacturers of steps and unfortunately no one has a 3-Step option that fits your 25-1/4 inch mount on your 2018 Forest River at this time. Most 3-Step options have different mount sizes with 27-1/2 inch being the more common sizing. I have attached a link to our 3-Step inventory department. I do have a 3-step scissor option by Torklift that is Item # TLA8103 that is close but it's mounting dimensions are 25-7/16 inch wide by 12 inch deep. Additional information...
view full answer... - Replacement Pull Out RV Steps For A 2018 Coachmen Apex Nano 193BHS Trailer TrailerThe Lippert part number 173552 you referenced comes back to the Lippert Manual Pull-Out Step for RVs # LC432682. Because there is a bit of cross over with these item numbers it's best to take a quick measurement of what you currently have to ensure nothing was lost in translation. These steps have the following dimensions depicted below. If you find the measurements differ from what your 2018 Coachmen Apex Nano 193BHS Trailer Trailer has then please let me know what those measurements...
view full answer...
- Folding RV Step for Ford Transit T150 VanI suggest the Flexco Manual Pull-Out Step for RVs, # SMFP-1100. While we cannot confirm the fitment to your van as we have not attempted this type of mount, I can point out that the Lippert Outriggers for RV Steps, # LC301704 are available if needed. These can be either bolted or welded to the van.
view full answer... - Recommended Replacement Steps For 2017 Forest River Sandstorm 27I can absolutely recommend a set of replacement steps for your 2017 Forest River Sandstorm 27 but you will need to do a quick measurement of your entry height to confirm the correct model as we unfortunately do not have a way of checking the entry height on your RV. I recommend the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear which you will need # TLA8104 if your entry height is between 32-1/2" - 44", # TLA8103 if your entry height is between 25-1/2" - 36", or # TLA8102 if...
view full answer...
Do you have a question about this RV Step?
Used Items Available
Condition: Surface Scratches
Notes: small dents on front of steps, frame has slight bend, light surface scratches
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Halie H
Installed by:
Cole B
Written by:
Chelsea B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mary
5/13/2024
Still working great. I took a corner to close and bent them a little, but they still work fine.