Master Lock Covered Solid Body Padlocks - 1/4" Shackle Diameter (2 Pack)

See what our Experts say about this Master Lock Padlocks

• Carrying a 30 Inch Diameter Spare Tire on the Roof of a 2015 Audi Q5 2.0 Hybrid Prestige
  Your 235/55-19 spare tire is about 30 inches in diameter. It will fit in the Yakima RocketBox # Y07192 but it will probably have to be placed in the box at a slight angle. What I recommend is a cargo basket instead of a box. You can use the LoadWarrior # Y07070 and then use the spare tire carrier # Y07076 to hold the spare in the basket. You can lock the spare to the basket and carrier using a pad lock such as # 141T for a 2-pack.
  view full answer...
• Cargo Basket Recommendation for 34" Tire Mounted on Truck Bed Roof Rack System
  I'd be happy to recommend a cargo carrier to fit with the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers # RRVA180B-RRRLT600 on your 2022 Ford F-250 Super Duty! I really like the 53" x 49" Yakima OffGrid Roof Cargo Basket # Y07139 because the mounting hardware is easy to use, you can lock it to the crossbars with the Lock Core Kit # Y07204, and it's compatible with the Spare Tire Carrier # Y07076 which works with up to a 35" diameter tire and can be locked...
  view full answer...
• Is There a Locking Gun Case Storage Box Available for the 2016 Chevy Colorado
  I may have a solution for you, but DuHa does not make an underseat locking gun storage box for any mid size trucks like the 2016 Chevy Colorado. It's not going to be exactly what you're looking for but they do have 2 truck bed mounting options that you could use on your truck with the # DU70103 or the # DU70114 (same as the DU70103 but with mounting brackets). You would also need padlocks for these which you can get with the Master Lock Covered Solid Body Padlocks - 1/4" Shackle Diameter...
  view full answer...
• What to do With Lid When Folding Up the Carpod Walled Cargo Carrier
  The lid of the Carpod Walled Cargo Carrier w/ Lid # M2205-2201 will actually need to be completely removed when you are completely folding it up. You will want to put the lid elsewhere, like inside your vehicle, if you do not need to use the carrier but still have it in the hitch. To mount it to your hitch you can use Pin and Clip # PC3 though I recommend using the Trailer Hitch Receiver Lock # e98880 to lock the Carpod to your and protect your investments. Additionally, if you decide...
  view full answer...
• Recommendation for a Weather Resistant Cable Lock to Secure Entry Ports on a Trailer
  The Master Lock Armored Cable Gun Lock, # 107KADSPT, is designed as a gun lock and is not intended for all-weather conditions. Water and salt could cause corrosion of the steel components. Instead, I recommend separate locks and cable that are coated and/or made of corrosion resistant materials. Take a look at Master Lock Covered Solid Body Padlocks, # 141T. These locks are constructed of corrosion resistant materials so would work well outdoors. I would use these locks with Master Lock...
  view full answer...
• Lock Solution for Bulldog BX1 Gooseneck Coupler
  The BX1 series of gooseneck couplers can be locked with a padlock like the part # 141T. When the BX1 couplers are in the coupled position, you can place a padlock through the hole as indicated in the picture. The coupler could then not be opened with or without a trailer connected.
  view full answer...
  
• Will The Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter Work With A B&W Gooseneck Hitch
  As long as the B&W gooseneck hitch is compatible with a 2-5/16" hitch ball, then yes, the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter part # CAB-C5G will work for you. To secure this adapter, I recommend using the Master Lock Covered Solid Body Padlocks part # 141T. If you do not already have a 2-5/16" hitch ball on your B&W gooseneck trailer, I recommend using the Replacement Hitch Ball for B&W Turnoverball Underbed Gooseneck Hitch part # BWGNXA2006. I have attached a review...
  view full answer...
• Lock Recommendation for the Convert A Ball Fifth Wheel Gooseneck Adapter
  To lock the Convert A Ball part # CAB-C5G you could easily use a pad lock set like the part # 141T that we offer. If you check out the very end of the review video I attached for this product you will see how the padlock would get used on this adapter.
  view full answer...
• Axle Spacing Compatibility with Ultra-Fab Chock and Lock Wheel Stabilizers UF21-001070
  The Ultra-Fab Chock and Lock Wheel Stabilizers # UF21-001070 will work on travel trailers whose tandem axles provide wheel-to-wheel spacing between 1-1/2 - 5-1/4-inches. This product is excellent for reducing the rocking of your occupied trailer or RV but it is not intended as a safety device like actual block-style wheel chocks such as # 337WC1467A. For wider wheel spacing the similar item # UF21-001095 is offered. Please refer to the linked video for installation details. Either kit...
  view full answer...
• Recommended Hitch-Mounted Cargo Carrier and Bag for 2017 Ford Explorer
  The etrailer Cargo Carrier # e98874 referenced in your question is a great choice for the 2 inch trailer hitch on your 2017 Ford Explorer. This carrier will provide you with inside/usable dimensions of 60 inches wide, 24 inches deep, and 5-1/2 inches tall. As you mentioned, the carrier can easily fold up toward the rear of your Explorer when not in use. It also tilts away from your vehicle, even when loaded, so you can get to your back doors. I have attached a short video demonstration...
  view full answer...
• Can the Offset Convert-A-Ball Be Locked
  Yes. The Offset Convert-a-Ball # CAB-C5GX1216 can be locked using a padlock like the Master Lock Covered Solid Body Padlocks - 1/4" Shackle Diameter (2 Pack) # 141T. If you've already got some padlocks with 1/4" diameter shackles, you could also use those.
  view full answer...
• How to Determine Correct Wheel Stabilizers for Tandem Axle Trailer
  In order to determine the correct wheel stabilizer for your tandem axle trailer, you need to know the spacing you have between your wheels, as there isn't a standard spacing for trailers based on size. So all you need to do is take a quick measurement of the space between the tires at their closest point, which you'll use to determine the right stabilizers. - Up to 5-1/4" Wheel Spacing: Ultra-Fab Chock and Lock Wheel Stabilizers # UF21-001070 (can be locked with Master Lock Padlocks #...
  view full answer...
• How to Lock Thule Adventurer Cargo Box With Missing Lock Barrels
  Although you have the lock core, you are missing the lock cylinder or barrel assembly it would install into. Unfortunately, Thule doesn't offer this as a replacement part. To be honest, your best bet would be to get a couple of lock hasps like # ML702D and padlocks like # 141T.
  view full answer...
• Does Carpod Walled Cargo Carrier Fit 2022 Tesla Model Y
  Yes, so long as your 2022 Tesla Model Y has a 2 inch trailer hitch receiver, you can absolutely use the Carpod cargo carrier you asked about, which is the following part number: - 23x47 Carpod Walled Cargo Carrier w/ Lid - 2" Hitches # M2205-2201 If you need a hitch the correct fit for your '22 Model Y (all models, including the Long Range) is the EcoHitch Invisi Trailer Hitch Receiver # EH39FR. When we installed this hitch on a Model Y we found it was about 5" from the hitch pin hole...
  view full answer...
• Swagman Bike Rack for an RV Towing Setup
  Bike racks like the Swagman XC, part # S64650 that are not rated for RV use are generally can't handle the increased sway and rock that an RV experiences. This is largely caused by the distance between the rear axle and the trailer hitch. RV Rated racks tend to be built with sturdier designs and heavier materials to be able to withstand this sway. Many of them will not have tilt or fold away features on them to help withstand this motion. I recommend avoiding the use of the dual-hitch...
  view full answer...
• Availability of a Waterproof Case to Store Equipment on a Hitch Mounted Cargo Carrier
  The waterproof cargo bag I recommend for your cargo carrier is the 20 cubic feet cargo bag # 988501. It will include 6 tie-down straps to secure it to your cargo carrier, but I recommend a lock such as the Master Lock padlock # 141T to lock the cargo bag by the zippers. Simply insert the lock through both holes on the zipper to secure. I went to our warehouse to get the cargo bag and locks to ensure they fit too. See picture I included. The center underside of the Tow Ready cargo carrier...
  view full answer...
  
• Is The Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter Compatible With A B&W Gooseneck
  As long as the B&W gooseneck hitch is compatible with a 2-5/16" hitch ball, then yes, the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter part # CAB-C5G will work for you. To secure this adapter, I recommend using the Master Lock Covered Solid Body Padlocks part # 141T. If you do not already have a 2-5/16" hitch ball on your B&W gooseneck trailer, I recommend using the Replacement Hitch Ball for B&W Turnoverball Underbed Gooseneck Hitch part # BWGNXA2006.
  view full answer...
• Needed Tools to Install the Convert-A-Ball 5th Wheel to Gooseneck Adapter
  No worries! You don't need specially-shaped sockets to install Convert-A-Ball 5th-Wheel-to-Gooseneck Adapter # CAB-C5G although a torque wrench like # PT87ZR is definitely helpful to make sure you have enough torque. When installing the kingpin, a 3/4" hex bit was used. I attached a screenshot from the video. As for the large square cap screws on the adapter, it helps to tighten down as much as you can with a crescent wrench before torqueing it down to the instructed torque of 100 ft. lbs....
  view full answer...
• Recommended 5th Wheel to Gooseneck Adapter for Atwood Gooseneck Folding Hitch Ball
  The reason that we do not have any information regarding the Atwood Gooseneck Folding Hitch Ball is because at this time we do not carry it, although we do carry the Draw-Tite version # 8339-4434. I do have a solution for you as long as your Atwood hitch instructions do not prohibit the use of an adapter. Since your 2003 Chevy Silverado 2500 has a long bed, I recommend using the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter, part # CAB-C5G. This is one of our top of the line...
  view full answer...
• Recommended Padlocks for Locking Bikes on Swagman Nomad Bike Rack
  I recommend using the Master Lock Covered Solid Body Padlocks # 141T to lock the ratcheting arms on the Swagman Nomad Bike Rack for 2 Bikes # S36FR. These padlocks have a 1/4" diameter shackle and they use the same key since they come in a pair.
  view full answer...
• Recommended Roof Basket and Cargo Bag for 2016 Toyota Highlander
  For a roof basket to mount onto the factory crossbars of your 2016 Toyota Highlander, I highly recommend the Rhino-Rack Roof Mounted Steel Cargo Basket # RMCB. This is a great, heavy-duty steel cargo basket that will provide a weight capacity of 165 pounds. It will fit with the factory crossbars on your Highlander as long as they are no wider than 3-1/2 inches or more than 1-1/2 inches in height. It also needs a crossbar spread (distance between the two crossbars) of 21 to 30 inches. This...
  view full answer...
• Hitch Cargo Carrier Recommendation for Carrying etrailer.com Generators # 333-0003-2-0007
  The Reese Cargo Carrier part # 6502 has a 500 lb weight capacity but doesn't quite have the dimensions needed to fit both of the etrailer.com generators part # 333-0003-2-0007 so for a better option I'd recommend the 23 inch by 47 inch Carpod Cargo Carrier part # M2205-2201 as it has the dimensions and weight capacity needed, but what I really like about this carrier is that it's enclosed which makes it easier to secure the generators in and also makes it easier to protect them from theft....
  view full answer...
• What are the Two Smaller Holes for on the Roadmaster Base Plate Kit # 1528-3
  The smaller holes on the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 1528-3 are there to padlock the arms to prevent theft. If you need a padlock, I recommend the Master Lock Covered Solid Body Padlocks - 1/4" Shackle Diameter (2 Pack) # 141T. I recommend this lock set because it has the vinyl covering that will protect it under your vehicle.
  view full answer...
• Recommended 2-Bike Rack for Use While Towing with a 2014 Chevrolet Traverse
  Aside from using some roof mount bike racks on your 2014 Chevrolet Traverse the most popular bike rack that we have for a towing application is the Swagman Traveler XCS # S64664. This is a platform mount bike rack that installs on a ball mount for a 2" trailer hitch. The platform style with ratcheting arms for securing the bikes allows you to carry a wide variety of bike frame styles that don't have a drastic step-through frame. It has a 70 lb weight capacity (35 lbs per bike) which will...
  view full answer...

Do you have a question about this Padlock?