To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This high-strength red threadlocker locks and seals a variety of threaded assemblies, preventing unwanted loosening of nuts and bolts and thwarting corrosion of treated parts. Stands up to the worst shock, vibration and environmental conditions.
Features:
Specs:
Applications:
The shaded areas of these diagrams indicate where this threadlocker should be applied in various types of threaded assemblies.
Threadlocker 262 is applied as a liquid to the threads of screws, nuts and bolts before assembly. The red, high-strength formula keeps connections securely tightened, even during the most severe vibration, shock and stress. Threadlocker also seals out air, water and grime to prevent rust or other corrosion from forming, ensuring that the connected assemblies will remain sound for a long time. Uncorroded assemblies come apart easier and can be reused.
This threadlocker requires heat (500F) to free parts for disassembly with hand tools. Five minutes' application of a torch may be required. Disassemble while parts are still hot.
This threadlocker is anaerobic (hardens in the absence of air) and requires contact with an active metal to cure. Active metals (those that tarnish, corrode or rust) include brass, copper, bronze, iron, soft steel and nickel. If both parts to be joined are made of inactive materials, Loctite Klean 'N Prime primer must be applied to one of the surfaces for curing to occur. Inactive materials include plated parts, stainless steel, zinc, galvanized steel, magnetite steel, pure aluminum, titanium, magnesium, gold, silver, plastic, cadmium, Iconel, natural or chemical black oxide and anodized aluminum.
Klean 'N Prime can speed the cure rate of Threadlocker 262. This is especially helpful when you are applying the adhesive to any material, active or inactive, in colder temperatures (below 70 F).
This product is OEM specified: It is approved to meet specifications of original equipment manufacturers.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (141 Customer Reviews)
This high-strength red threadlocker locks and seals a variety of threaded assemblies, preventing unwanted loosening of nuts and bolts and thwarting corrosion of treated parts. Stands up to the worst shock, vibration and environmental conditions.The instructions and accompanying videos on your site made this a DIY installation that came out perfectly.
Used it for the towing equipment on our Jeep and it has done it's job by keeping all the bolts in the same position. Would highly recommend
Worked as expected.
I ordered multiple Roadmaster products from etrailer.com to rebuild a used Roadmaster Sterling towbar and prepare my car for its first time towing behind the motorhome. The etrailer people are great to work with, the prices are good, delivery is quick, and free shipping for all of my orders. The technical support at both etrailer and Roadmaster is the best.
This stuff works! Used it to install my trailer hitch bolts.
Bought this product after watching the video how to install base plates on 2014 Honda CR-V. If you read the instructions talks about checking the bolts periodically for torque, now I don't know how many people are going to spend 4 hours pulling off the front bumper to this. So for peace of mind use this product so bolts won't come loose.
For the installation the instructions were good, but watching some videos made it much easier to take apart a brand new car. All went well. Installed on a 2020 Chevy Equinox 2.0
I have used the LocTite products for many years. They make several grades of thread locking fluids, each appropriate for specific uses. Their products do exactly what they say they will; and will secure threaded parts from vibration or lock them together permanently. Your toughest choice will be in determining which product is most appropriate for your use. My recommendation is to start with the lowest strength and work you way up as needed. Just remember that without special tools, permanent means permanent with this product. The lower grades are very strong in preventing vibratory loosening.
Needed Loctite 262 to assemble my Harley Road King primary. Great service and fast shipping. Will buy from etrailer in the future.
Easy install and a HUGE difference in control. Along with the stabilizer you cannot go wrong.
Loctite used on base plate installation. Worked well as always.
Reinstalling clutch, equipment manufacturer specifies using LOCTITE 262 on clutch reinstall. Unable to locate 262 except in large quantities in my area. Etrailer had the small quantity 262 and responded to my order immediately. Completed clutch reinstall and equipment is running fine. Thanks Etrailer
Product was exactly as advertised, and as I wanted. Delivered as stated. etrailer is a great company to work with. This is the second vehicle I have outfitted, and they have had great videos and directions with their products.
I am so glad I came across etrailer.com, They have what I need in stock, and show you how to use and or install the product.
They have great prices and fast shipping, What else could you ask for!
Product worked as advertised. Can't ask for more than that. etrailer.com was very good at expediting my order. Thanks
Perfect size for replacing 24 wheel studs on my 1975 Argosy.
Perfect installation. works as advertis ed..
Great product. Instructions easy to follow
Loctite worked great for front sight installation on a Glock. Service / delivery impeccable and timely.
Loctite is always a good thing!
Was easy to install and stabilized the RV significantly.
The parts were as described during the purchase phase of my order. The prices and quality of parts were very good and de]livery and packaging efficient. I will refer this supplier to my friends!
Bolts have not fallen off yet... lol They are all still tight.
Excellent product used it several times on some small nuts and bolts.
It's Loctite folks, what's to say, it works as it should.
Do you have a question about this Lubricants Sealants Adhesive?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jeffrey
4/8/2020
Used on bolts for trailer hitch receiver.Still holding tight after 1-1/2 yrs.