To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Raise hauling to a new level with this elevated truck bed rack. The streamlined ladder rack is custom fit for your vehicle and works with inside-the-rail tonneau covers. Gain 500 lbs of load-carrying capacity without sacrificing your bed cover.
Features:
Specs:
Whether you're working or playing, the Adarac Pro Series truck bed ladder rack will haul your gear to a higher level. This aluminum rack lets you elevate long construction loads such as ladders, lumber, and pipes or recreational equipment like surfboards, snowboards, kayaks, and more.
Tonneau Cover Compatibility
This ladder rack works with Lomax hard tri-fold covers, Access roll-up covers, and most other inside-the-rail tonneau covers. Pairing your tonneau cover with the Adarac Pro creates a seamless, sophisticated look. And the framework of the ladder rack won't interfere with the framework of tonneau covers, in-the-bed toolboxes, or other gear.
Utility Rails and Slotted Crossbars
Take advantage of the utility rails and slotted crossbars with built-in mounting channels for quickly attaching accessories. Tie-downs (sold separately) attach to the utility rail's mounting channels and can be easily repositioned to secure additional cargo.
The slotted crossbars offer mounting channels on both the top and bottom of each bar. The anti-slip, anti-vibration rubber strip on each crossbar stabilizes your cargo. You can remove the rubber strip to utilize the top mounting channels.
The vertical uprights can be repositioned along or removed from the utility rails to accommodate the size of your load. Included channel nuts allow the uprights to slide closer to or further apart from one another along the rail's mounting channels.
Optional Load Stops
Sold separately are load stops that help contain your cargo and prevent it from shifting. They have integrated tie-down hooks that can be used to strap your load down. The load stops easily attach to the front or rear crossbar mounting channels and can be adjusted along the bars to accommodate the size of your load. Simply slide the load stops along the mounting channels into the desired positions, and then tighten for secure placement.
These load stops are constructed of durable, rustproof aluminum, and they have thick rubber casings to help stabilize cargo.
Easy, No-Drill Installation
The Adarac Aluminum Pro Series is easy to install with the included mounting hardware. No drilling is required.
The utility rails mount onto your truck bed rails with the included aluminum stake pocket inserts. The underside of the rails are foam-padded to protect your truck from scratches during installation.
Streamlined Aluminum Design
The Adarac offers a heavy-duty, streamlined design with an aluminum framework that is lightweight but tough. The rustproof, UV-resistant construction with an extruded anodized aluminum finish on the crossbars and rails provide added durability.
For a clear view, the angled uprights are positioned on the truck bed railing, and the crossbars run above your vehicle's roof. The tapered shape of the uprights create a clean look while maintaining durability. Hauling long loads across the durable aluminum crossbars leaves more room for other cargo and accessories in your truck bed.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (29 Customer Reviews)
Raise hauling to a new level with this elevated truck bed rack. The streamlined ladder rack is custom fit for your vehicle and works with inside-the-rail tonneau covers. Gain 500 lbs of load-carrying capacity without sacrificing your bed cover.
I bought this ladder rack because I needed something that would attach to the stake pockets of my f-150 because I have a bed cover. Everything else I found had to hook around the side of the truck bed. Installation was easy. The only issue I had was the forward stake holes didn't have a removable cover. I had to cut a hole in each side.I use them to carry my kayaks when I go camping. They work great for that and carrying anything that won't fit in the bed.
I had delayed trying to get ladder racks because I wasn't sure whether it would work with my bed cover. I was able to locate the correct model online and verify my findings and order on the phone Rodney was helpful and friendly.
I have had the rack installed for about six weeks. After a few trips on everything from highways to gravel and dirt roads it has been very solid. We have a fly fishing rod case mounted on it and it's solid. I think there is a little wind noise but not much. Easy to install, lots of good paper instructions as well as videos on line. Next trip will have our canoe mounted on top.
Packaged delivered in good shape. The rack was very well made. It was easy to install. Very sturdy and should hold up well. The Pro model worked with my Bak-flip Tonneau Cover. I would highly recommend this product. I have used etrailer for years and they always come thru.
I love my Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - Matte Black - 500 lbs. I found it easy to install by myself—including cutting the deck plastic trim to expose my stake covers. Its black finish complements my truck. Best of all, it enables my BAK Industries tonneau cover, Revolver X2, to maintain is full functionality. My only recommendation would be to include more foam strips. They are intended to fill the gaps between the end of the grooves on the plastic trim to the end of the rail. There was enough for one strip of foam on each end rather than two (one on each side of the rail) on each end of the rails.
Easy to install, very stout, light weight, looks great and the tie down points on the ends of the racks are a great feature. Nothing to not like ... well maybe the price lol.
Took a couple of hours to install. One on the few you can use with hard tri-fold bed cover. Going to add side bars for off-road tools.
Love this ladder rack...it works great with my tauneau cover, Iuse it to transport our Kayaks when we go camping and it is great to still be able to use my bed with the tauneau cover on to protect our gear in inclimate weather. I would absolutely buy it again. Thanks.
I really like the aesthetics of the ladder rack and functionality. Its sturdy, durable and looks slick !
Works great with the backflip hard cover.
Should have some predrilled hole to attach tie down straps.
I think it's a great ladder rack for step ladders and shorter extension ladders. I qwould support anything longer than a 16 footer. It was easy to put together and works really well for what I need and with my tonneau coover
Order was cancelled because I couldn't get timely delivery. Got delivery from another source. Rack is great, carries two Kayaks and two cycles cross country! Still do business with etrailer anytime I can. Will be in touch!
Would have been 5, but threads on 4 bolts were slightly jammed up making assembly more difficult than it should have been. Also some minor scratches on parts from shipping. Overall easy to assemble and rock solid.
Very good ladder / load rack. I have maxed it out several times with heavy lumber. No issues at all.
Easy installation Will let, me take kayaks with my new travel trailer.
This rack is very solid and travels well.
I have had no problems but I should say I have used it lightly.
Rack was just what I was looking for. Pretty easy to install.
The rack is great
Perfect fit, looks great easy to assemble. everything it is supposed to be. 100 percent pleased with the product.
Do you have a question about this Ladder Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.