Load Stops for Adarac Truck Bed Ladder Rack Crossbars with Mounting Channels- Qty 2
(30 reviews)
Price: $34.05
In Stock
Load Stops for Adarac Truck Bed Ladder Rack Crossbars with Mounting Channels- Qty 2
Item # A4000880
Our Price: $34.05
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (30)
- Q & A (0)
- Videos (1)
- Photos
Adarac Accessories and Parts - A4000880
- Ladder Racks
- Load Stops
- Adarac
- Adarac Truck Bed Rack
Durable, rustproof aluminum load stops secure and stabilize your cargo when carrying elevated loads. Designed to fit aluminum Adarac ladder rack crossbars with mounting channels. 2 Load stops included.
Features:
- Position load stops freely along the mounting channels of your ladder rack's crossbars to stabilize and secure cargo
- Designed for your Adarac ladder rack crossbars with mounting channels
- Integrated hooks on the bottom can be used as tie-down points for additional cargo
- Lightweight aluminum construction is rustproof and UV resistant
Specs:
- Maximum capacity: 100 lbs per load stop
- Quantity: 2 load stops
These load stops will fit aluminum Adarac crossbars with a mounting channel along the bottom and/or top of the bar, as pictured above.
4000880 Agri-Cover Inc (ACI) Add a Rack Load Stops for Crossbars with Channels - Aluminum - Qty 2
Installation Details
Video of Load Stops for Adarac Truck Bed Ladder Rack Crossbars with Mounting Channels- Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Adarac Ladder Racks A4000880 Review
Speaker 1: Today we're taking a look at the load stops for Adarac Truck Bed Ladder Rack Cross Bars. You can position these load stops freely along the mounting channels of your ladder rack's cross bar to stabilize and secure your cargo.These are designed for your Adarac ladder rack cross bars with mounting channels. You'll notice that here on the bottom we have the integrated opening. This can be used as a tie down point for securing additional cargo. You can place an S-hook, a ratchet strap, anything on there to secure your gear. So that's a nice built-in feature of the unit.The load stops are constructed from light-weight aluminum.
They're rust-proof and UV-resistant. They also have these sleeves or these top caps that protect your gear from scratches. So whatever gear makes contact with the load stop you don't have to worry about this scratching or damaging it at all.Maximum capacity is 100 lbs per load stop and you'll get two load stops with this part number. The overall height from bottom to top is about five inches tall, but the usable height, so your bar, actually sits right here, so basically what happens is this piece goes on top. This is the piece that slides into the channel along the bottom of the cross bar.
And so, the usable space of the load stop is really from this top cap, up, which is about three and one-eighths inches. The width of the aluminum bracket is two and one-eighth inches wide and it increases to that two and five-sixteenths inches if you include this cap or this sleeve.The opening, right here, for a tie down. This measures an inch and a quarter long, right here at the base, and then front to back is about nine-sixteenths of an inch wide.That's gonna do it for today's look at the load stops for Adarac Truck Bed Ladder Rack Cross Bars.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Load Stops for Adarac Truck Bed Ladder Rack Crossbars with Mounting Channels- Qty 2 - A4000880
Average Customer Rating: 4.9 out of 5 stars (30 Customer Reviews)
Durable, rustproof aluminum load stops secure and stabilize your cargo when carrying elevated loads. Designed to fit aluminum Adarac ladder rack crossbars with mounting channels. 2 Load stops included.by: Gary04/20/2022
I had delayed trying to get ladder racks because I wasn't sure whether it would work with my bed cover. I was able to locate the correct model online and verify my findings and order on the phone Rodney was helpful and friendly.
by: Stephanie04/14/2020
Goes well with our ADARAC ladder rack which will be used for hauling kayaks.
by: Gary 08/14/2023
Super fast delivery. Great company to work with always a pleasure
by: Arthur 05/19/2023
Easy to install. Shipping arrived on time. Real heavy duty.
by: Gary 08/06/2021
Got fast shipping, got exactly what was described, again!! E trailer is my first stop whenever I’m looking for stuff for my truck or rack, because of their service!
by: I smith05/08/2021
Really nice ladder stops 5 stars .My only complaint is shipping takes a long time but etrailer has some products and I will be buying from them again.
by: Angel 06/02/2023
fast and efficient
by: Gary05/16/2019
I've had a set of these ladder stops installed on my truck for a year and need another set. They are easy to install and work fine. They do catch the wind though. I was very impressed at the speed of delivery of this order. Very good job!!
by: Paul 01/12/2021
Nice materials and hardware. Works well with the Adarac Pro.
by: Michael 10/03/2020
Good, reliable company for truck produc ts.
by: Gary04/10/2019
Couldn't be more satisfied with these stops.
by: andrew06/24/2021
Got it.
Looks great!
Andrew
6/24/2022
This rack looks great and works even better. I have a hitch in the bed of my truck. The rack can be loosened and slid along the track and out of the way of the hitch.
by: Harveen10/25/2022
Fast shipping and fast delivery. So happy with product.
by: Sergio09/07/2022
Durable, strong and very good aesthetics !
by: Hector R07/12/2022
Very sturdy and easy to install. They don't loosen and I have been beating the hell out of them. No break, or cracking yet.
by: Ronald 08/19/2022
Nice quality and function well.
by: Gary 04/04/2021
Gary
4/5/2022
They are still going strong after a year. They’re easy to move or remove. They are really great
by: Anthony06/23/2023
10:10
by: Richard 07/02/2021
Easy to install will help hold kayaks from sliding side to side.
by: Fernando 11/24/2021
A++ products
by: Eliel03/19/2021
Great product
by: Jason 07/13/2022
Arrived ontime as describex
by: Chris 02/29/2020
Package was shipped the same day as the order was placed and arrived quickly.
Thank you
by: Richard 05/24/2024
by: Matt09/09/2021
25
30
Show More Reviews
See what our Experts say about this Adarac Accessories and Parts
- Adarac PRO Series Racks Overall Height Above Bed RailsThe Adarac Pro # A4000952 is 30" tall from the bed rail to the tallest point of the rack when installed. This rack is designed to sit a couple inches above the cab, as well. For carrying kayaks, you'll want to add the Aluminum Tie-Downs # A4000882 to provide a secure tie down point or the Load Stops # A4000880 which have tie down points integrated while also providing stabilization of your cargo.
view full answer... - What Hard Roll-Up Tonneau Cover and Ladder Rack do You Recommend for My 2022 Ford Ranger?For a great hard roll-up tonneau cover that will allow you to use a ladder rack and fits the 5-foot bed on your 2022 Ford Ranger, I recommend the BAK Revolver X2 Hard Tonneau Cover - Roll Up # BAK39332. The Revolver X2 is a ultra-flush, low-profile cover that sits inside your truck bed rails and has no visible hinges. It also involves a no-drill installation and simply clamps on the inside of your bed's side rails. As far as the ladder rack, I recommend the Adarac Pro Series Custom Truck...
view full answer... - Recommended Ladder Rack for 2021 Toyota Tundra With Deck Rail SystemFor your 2021 Toyota Tundra I recommend the Adarac Pro Series Custom Truck Bed Ladder Rack. The exact rack will depend on your truck bed. You will need one of the following: # A4001666 for a 5-1/2 foot bed. # A4001671 for a 6-1/2 foot bed. # A4001676 for an 8 foot bed. This rack has a carrying capacity of 500 lbs (250 lbs per bar) and is also compatible with most inside-the-rail tonneau covers. It is constructed of aluminum so it is rust proof and has integrated mounting channels along...
view full answer... - Will the Thule Xporter Work with a Truxedo Tonneau Cover on a 2019 Ford Ranger?I have a great solution for you. Unfortunately since the Thule Xporter # TH500XTB clamps onto the bed rails of your truck, it will not work with a Truxedo tonneau cover. If you have a Trexedo tonneau cover that attaches fully inside the bed's bed rails, a great solution is the Adarac Aluminum Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs # A87ZR (for 5-ft. beds) and the # A59ZR (for 6-ft. beds). The Adarac Aluminum Series ladder rack attaches on top of the truck bed's rails and...
view full answer... - What No-Drill Ladder Rack Works with the BAKFlip MX4 # BAK448130 on My 2021 Silverado 1500 Short BedFor a great drill-free ladder rack that is compatible with the BAKFlip MX4 # BAK448130 on your 2021 Chevy Silverado 1500 with a 5-3/4 foot bed, I strongly recommend the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum # A4002965. Since the Adarac's base rails stand straight up without any inward angle, there is no need to worry about any rubbing/interference of the rack with the MX4 when opening/closing. Since the MX4 install on your truck completely inside the bed rails, it leaves...
view full answer... - Which Ladder Rack Will Work With BAK Revolver X4 Tonneau Cover On 2018 Chevy Colorado 5' BedI have a solution for you, but the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack - Aluminum - 500 lbs - 68" Crossbars # Y01151-58 is specifically made to work with the Retrax XR tonneau cover and will not work with your BAK Revolver X4 cover. For a ladder rack setup that will work with your current bed cover, I would look into either the Adarac Pro Series Custom Truck Bed Ladder Rack 500 lbs # A4000950 or the Adarac Aluminum Series Custom Truck Bed Ladder Rack 500 lbs # A4001225....
view full answer... - Does the Adarac Custom Ladder Rack # A4003493 Fit with the BAKFlip MX4 on My 2021 Silverado 1500?Yes. Since the BAKFlip MX4 # BAK448131 leaves the stake pockets completely open on your 2021 Chevy Silverado 1500 with 6-foot bed, you can use the Adarac Custom Truck Bed Ladder Rack - Steel with Aluminum Crossbars # A4003493 with the cover. However, if you notice from the design of the ladder rack, the bases angle inward toward the center of the truck. With this factor, there may be some rubbing when trying to open and close the MX4 on the truck. In order to open and close the cover, you...
view full answer... - Does the TracRac SR Fit Simultaneously with the BAK Revolver X4s on My 2022 Ford F-150?Based on your recently-searched parts, I am assuming you have a 5-1/2 foot bed on your 2022 Ford F-150. If that is the case, the Thule TracRac SR # TH43002XT-508 and the BAK Revolver X4s # BAK56ZR are definitely compatible. I went ahead and attached a photo of a neighbor using the TracRac SR and the X4s on his Ford F-150. However, while it is not a huge issue, there may be some very slight rubbing against the base of the innermost sliding upright of the TracRac SR since they angle toward...
view full answer...
- What Ladder Rack do You Recommend that Works with My WeatherTech AlloyCover on a 2018 GMC Canyon?I went ahead and did some research on your WeatherTech folding aluminum AlloyCover. From the photos I found, it looks like the AlloyCover installs on the inside of the bed rails of your 2018 GMC Canyon and leave the stake pockets on the rail caps completely open. If this is the case, I recommend the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum # A4000950 (for 5-foot beds) or the # A4000951 (for 6-foot beds). The advantage of the Pro Series lies in the fact that it installs...
view full answer... - Ladder Rack For 2014 Ford F-150 With 5-1/2 Foot BEd Compatible With BAK Roll-X Tonneau CoverThere is a ladder rack option for your 2014 Ford F-150 with a 5-1/2 foot bed you can use with your BAK Roll-X tonneau cover, but the Invis-A-Rack Folding Ladder Rack # DZ951550 won't work because it clamps onto your bed rails, so it would interfere. What you will need instead is a rack from Adarac that installs into your F-150's stake pockets: - Adarac Pro Series Custom Truck Bed Ladder Rack # A4000964 This rack has a 500 lb weight capacity, just like the Invis-A-Rack, and is able to...
view full answer... - Which Ladder Rack Fits A 2020 Ford F150 With Bed And Roll-N-Lock Toneau Cover?You will want to verify, but it looks like the Roll-N-Lock tonneau covers for the 2020 Ford F150 mount inside the bed rails and not in the stake pockets. In this case, you can install a rack that mounts on top of the bed rails such as Adarac Pro Series Custom Truck Bed Ladder Rack which comes in black # A86RR or silver A4000964. This rack has 2 66" long crossbars that have integrated channels in which you can install Tie-Downs # A4000882 or Load Stops # A4000880. The weight capacity for...
view full answer... - What Tonneau Cover and Ladder Rack do You Recommend for a 2022 Ram 1500 with MultiFunction Tailgate?For your 2022 Ram 1500 with a 5-1/2 foot bed (without Ram Box) and a multi-function tailgate, I recommend the TruXedo Pro X15 Soft Tonneau Cover - Roll Up - Polyester and Vinyl # TX89FR. The Pro X15 comes with automatic tension control keeps the cover tight. In addition, the cover is super low-profile (sits only 1/2 inch above truck's bed rails). This provides a more sleek/factory look of the cover. This cover is compatible with your multi-function tailgate. Since the stake pockets remain...
view full answer... - What Folding Tonneau Cover and Ladder Rack do You Recommend for My 2022 Chevy Colorado? For a great folding tonneau cover for your 2022 Chevy Colorado (5-foot bed), I recommend the BAKFlip FiberMax Hard Tonneau Cover - Folding # BAK126126. The FiberMax is made of 1/2" thick, fiberglass-reinforced polymer panels. It also comes with hair cell texture which helps with durability in the sunlight or elements. As far as installation, it does not require drilling and attaches inside your truck's bed rails. If you are looking for a compatible ladder rack with the FiberMax, I recommend...
view full answer... - What Ladder Rack do You Recommend to Use with the Revolver X4s # BAK56ZR on a 2022 F-150? As far as the Thule rack, I believe you are referring to the Thule TracRAC SR # TH43002XT-508. You are definitely correct that this works with the BAK Revolver X4s # BAK56ZR. However, it is important to note that since the uprights of the TracRAC SR angle inward toward the truck, there may be some slight rubbing of the X4s against the uprights when opening and closing. For your 2022 Ford F-150 with a 5.7 bed, I recommend the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum # A86RR...
view full answer... - Is There A Ladder Rack That Is Compatible With BAKFlip MX4 Tonneau Cover On 2015 Toyota Tundra?Yes there is! You will want go with the Adarac Pro Series Custom Truck Bed Ladder Rack; this installs on top of the bed rails and has upright arms that will not interfere with the BAKFlip MX4 Hard Folding Toneau Cover. If you have the 5-1/2' bed then the correct version is # A4001666, and if you have the 6-1/2' bed then the correct version is # A4001671. This ladder rack features 66" long crossbars that have a T-slot channel on top. This allows for track-mounted accessories to be easily...
view full answer... - What Economical Retractable Tonneau Cover Works with My Ladder Rack on My 2020 Toyota Tundra?Yes! You are correct that I was talking about a 6-1/2 foot bed on a 2020 Toyota Tundra. The Adarac Aluminum Series Custom Truck Bed Ladder Rack # A4001670 will definitely fit. As far as being able to move the rack away from the tailgate - yes, you will be able to position the uprights/crossbars forward away from the rear. In most truck models, the mounting pockets are located under a small, square plastic tab. There are also some truck models that require you to saw off the top surface...
view full answer... - Will the Thule XSporter # TH54RR Fit with My BAKFlip MX4 on My 2020 GMC Sierra 1500?I have a solution for you. When considering a ladder rack for your 2020 GMC Sierra 1500, it is important to determine if your truck's stake pockets are open and accessible. If you have a BAKFlip MX4 installed on your vehicle, the stake pockets on your truck are available to accommodate a ladder rack. However, since the Thule Xsporter Pro Shift # TH54RR clamps onto your truck's bed rails, it will interfere with the BAKFlip MX4. For a great alternative that is compatible with your tonneau...
view full answer... - What Ladder Rack do You Recommend with the BAKFlip MX4 # BAK72426 on My 2022 Toyota Tacoma?The great thing about the BAKFlip MX4 Hard Tonneau Cover - Folding # BAK48427 on your 2022 Toyota Tacoma (6-foot bed) is that it leaves the stake pockets completely open for stake-mounted ladder racks. For the absolute best option, I recommend the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum # A26ZR (matte black) or # A86ZR (aluminum). There are a lot of benefits to using this model with the # BAK48427. First off, since the uprights stand straight up and do not angle inward...
view full answer... - What Ladder Rack do You Recommend to Use with My Lomax Folding Tonneau on My 2021 Ram 1500?Without knowing which exact model of Lomax tri-fold tonneau cover you have installed on your 2021 Ram 1500, the main determining factor that allows for you to install a ladder rack is if the tonneau cover leaves the stake pockets completely open on your rail caps. As long as your tonneau leaves the stake pockets open like the model # LOM28QR, you can accommodate a stake-pocket mounted ladder rack. For the stake-pocket mounted rack, I recommend the Adarac Pro Series Custom Truck Bed Ladder...
view full answer... - Ladder Rack Compatible With BAKFlip MX4 on 2020 Jeep Gladiator MojaveWe have one ladder rack available that is compatible with your BAKFlip MX4 # BAK77FR. That is the Adarac Pro Series Custom Truck Bed Ladder Rack # A38ZR. This features a no-drill installation so you won't be drilling any holes in your bed. It also has an aluminum construction with a matte black finish, and a carrying capacity of 500 lbs. Load stops # A4000880 and tie-downs # A4000882 are available separately if needed.
view full answer... - Which Ladder Rack Will Work With My BAKflip MX4 Bed Cover On 2019 Toyota Tundra 5-1/2' Bed?I can definitely find you a nice ladder rack that is compatible with the BAKFlip MX4 Hard Tonneau Cover # BAK48409T that is installed on your 2019 Toyota Tundra with 5-1/2' bed. I highly recommend looking into the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs # A4001666. This is designed to be compatible with inside-the-rail bed covers like the MX4. The crossbars on this system are 66" long and feature an integrated channel on top and bottom of the crossbars; this...
view full answer... - Finding A Ladder Rack To Pair With BAKFlip G2 Hard Folding Tonneau Cover On 2016 Chevy ColoradoLuckily, the BAKFlip G2 Hard Tonneau Cover - Folding # BAK26125 installs inside the bed rails, leaving the top of the bed rails exposed for specific ladder racks to mount to. For your 2016 Chevy Colorado 6' bed, I recommend going with the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs # A4000951. This is a popular option which has completely vertical upright arms that do not bend in, allowing for full functionality of your folding hard tonneau cover. The ladder rack...
view full answer... - What Ladder Rack Will Work Transporting Kayaks on My 2020 Ford Ranger?Since your Gator FX hard folding cover leaves your truck bed's stake pockets open, you will be allowed to mount a stake-mounted ladder rack into the truck with your cover. If you have a 5-foot bed on your 2020 Ford Ranger, I recommend the Adarac Pro Series Custom Truck Bed Ladder Rack # A36ZR. The Adarac Pro Series is great because the bases on the ladder rack do not slant inward, which will make it easy to open up your Gator FX cover without rubbing against the rack. In addition, you can...
view full answer... - Will Adarac Ladder Rack Fit with Retractable Cover on 2023 Chevy Silverado 2500 Short BedYes, the Adarac Aluminum Series Custom Truck Bed Ladder Rack # A36HG is compatible with the Pace Edwards Full-Metal JackRabbit # PE88CV cover on your 2023 Chevy Silverado 2500 short bed. The tonneau cover installs inside the bed rails and the ladder rack uses the stake pockets for the installation so they won't interfere with each other at all. The ladder rack comes with tie-down loops at the ends of the crossbars but if you want some other options you can use the tie-down kit # A4000882...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Cole B
Updated by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Gary
4/11/2020
The ladder stops are still working great!