To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located in the rear cargo area. You will have to remove the rear threshold plate, privacy screen, storage covers, and floor covering and partially remove the rear interior trim panels to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed in the rear cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A ModuLite power module is built into this T-One connector. With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (58 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.The last time I wired a vehicle was 25 years ago, nightmare on Elm. To this kit, what a difference, everything I needed was in this kit, fantastic!! And, most of all, thank you, very much!! Took me 20 minutes to wire everything, read the directions and watch your video's. Best tool yet, thank you again.
This wiring harness fit our 2020 Escape Titanium Hybrid perfectly! The online video demonstrates the installation. Big thank you to etrailer.com for supplying all the parts needed to install a complete hitch assembly including a hitch, wiring harness and mounting bracket for the harness plug.
James F.
9/17/2021
Excellent product & fit
Great instructional video, quality part - what’s not to like?
Good price. Have not installed yet. Was emailed and told that it will not come for a few more weeks but it arrived on time.
This item was back ordered till 11/22/23 , this is totally unacceptable had to demand a refund on 8/30/23 Wish this transaction went a lot smoother. Ordered one from auto zone and will ship to my residence on 9/1/23
Very easy to install
The video on the install was spot on for my 2020 Ford Escape Hybrid SE. Only issues I had were cleaning up the goop from under the door weather seal that got spread along a bit after I peeled it back. A roll of paper towels and a few shots of WD40 loosened it up and got it off. I don't use the towing set up that much so I left the wires inside the car rather than mount the connector outside. Passed all tests with my tester and on the trailer. Thanks for the great products and videos!
This wiring harness works perfectly and is very easy to install. I had ordered the C95FR which was a product made by Curt (#56432) and on there site said it was the right harness for the 2020 Escape and did not work. etrailer exchanged the part thinking it may have been bad with no questions. That one did not work either so I ordered the TE54FR which is the correct harness for my car. etrailer was great to work with and I will order from them on future needs. There video is accurate and you do not have to pull the tail lights on the 2020 escape like on all the proceeding models.
Awesome product. No disappointment here.
The combination of finding the correct part as well as the very detailed and informative video made installation so easy on this that I didn’t need to read the instructions.
Super kit! It's well thought out and easy to install.
Looks well made, just not enough ambition to install it
Easy plug and play harness. However, the instructional video should include wiring to a traditional Escape. Not just a hybrid, which the battery is in the back of the car, easy peasy to get to. The traditional gas powered car is more involved to get wired to the front of the vehicle. At least give pointers.
Everything needed for our 2020 Ford Escape. All the connections were strait forward and and worked directly. You do need to open up some of that back inside paneling but that's were the connections are so you have to do what you need to do. It wasn't hard on the Escape. The instructions were accurate and clear.
Wiring harness was a simple plug in fit for my 2020 Ford Escape. Interior panels easily popped open to access all the connection locations.
The kit installed smoothly and worked on the first test. I couldn't find a You Tube video for a 2020 Ford Escape Hybrid installation but the supplied printed instructions were clear and told me what I needed to know.
Instructions were clear and detailed. The wiring has worked flawlessly. It may take a little time to install, but the finished product is neat and out-of-the-way. It looks as good as a factory install!
I put this on my 2020 ford escape. The only slight issue I ran into was running the power wire to the battery. The video shows it being installed on a titanium version with the battery in the back. Lower models have the battery upfront with several different firewall grommets.
Great fit, quick shipping, excellent video for following along and doing the install. Tons of length for the harness, very impressed.
Ordered 06/01/20 - Shipped 06/02/2020 - Arrived 06/05/2020 -
Installed 06/05/2020 (had a professional install) - Have not used it yet but look it looks good from the back of the car. I like the little device connector next to the receiver.
Looks good
Works well. Fits well. My battery was all the way in the front so I wired it to a cigarette outlet that was in the back and it works great
Great product, worked exactly as hoped for my car.
Service was fast but I hate to pay for shipping
I use to work for [online] many years ago.
Use to install your hitch on many vehicles
In the early 80’s
I know that your hitches are #1
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
3/28/2024
Easy to install and the stay on when in use.