To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Designed for use with motor-home-mounted tow bars, the direct-connect brackets are virtually invisible, easy to mount and remove, and they eliminate the need for a quick-disconnect crossbar on your tow bar. Installs on your vehicle's frame.
Features:
Note: Roadmaster direct-connect base plates will only work with Roadmaster tow bars that slide into a trailer hitch, such as the Nighthawk, Sterling, Blackhawk, Blackhawk 2, Falcon, or Falcon 2. These base plates will not work with tow bars that require a hitch ball.
The drawbars, or front arms, on this base plate kit are supremely easy to mount and remove. Just insert them into the brackets and twist to lock them in place. To remove each arm, simply tug the built-in pull pin to disengage the lock, twist the arm back and pull it out of the bracket. Once the drawbars have been removed, the remaining brackets are virtually invisible. On most automobiles, the brackets are mounted within the grille, where they remain not only unseen, but protected from scrapes and scuffs as well.
Average Customer Rating: 4.8 out of 5 stars (2057 Customer Reviews)
Designed for use with motor-home-mounted tow bars, the direct-connect brackets are virtually invisible, easy to mount and remove, and they eliminate the need for a quick-disconnect crossbar on your tow bar. Installs on your vehicle's frame.Just received the base plate. Nicely packaged and well built. I will update once installed
The Roadmaster baseplate has been used for a full season now and I couldn't be happier with the performance. The installation went smoothly and was simpler and less invasive than other brands. The videos provided by etrailer were a great help as well.
Thanks etrailer for the great product, great price and delivery, and great product videos!
3rd Road master tow bar I have installed on my toads (Miata, Honda Fit and Kia Soul). All are well built but not all interference issues are in instructions and video. On the Kia Soul, wasted 3 hours figuring out bolt was too short for blind assembly inside a pocket. Also radiator air guides needed trimming. Just plan for more time and be patient.
No problems after 1yr, 2000 miles. Installation took some time, but instructions were good. Parts fit well.
I 1st bought the Blue Ox and found that it called for too many modifications and it was thin and flimsy. When I received the Roadmaster bass plate, I quickly seen that it was a better product. It's a thiker metal and had easy direction to follow. I've towed over 50,000 miles with it and haven't had any problems.
Baseplate fit my Kia Soul perfectly. Instructions were clear and while not easy, installation went without any problems.
This worked out well for my Kia Soul. The removable arms are quick to release and and store away while leaving the front of the Soul looking uncluttered. I would buy again.
Great product, took about 2 hours to install, directions were easy to follow and all parts were provided. Tow bar brackets are way overkill, thanks..
The baseplate arrived in excellent condition and I was able to install it in just under 2 hours. Everything fit pretty good but I did have to modify two bolts to make it fit properly on my 2018 Kia Soul. The instructions were right on and the pictures were a great help.
etrailer has some of the greatest customer service I have experienced in a long time , I ordered several things to outfit my toad and from start to finish they were a class company to work with .
New customer for life !
INSTRUCTIONS DO NOT SHOW THE RIGHT CUTOUT FOR MY GRILL
Lightning Fast Delivery
Getting installed at the RV dealership today. Arrived promptly and the cost was reasonable.
Thanks
I bought and self installed this on my 2021 GMC Sierra Duramax 1 year ago. Install took about 5 hours and wasn't difficult...I could problty install it in 2-3 hours after leaening the tricks. Weve towed the truck all over the USA since then (over 10,0000 miles) and it works great! I've used other brands and highly recommend Roadmaster tow systems over the competition.
I reported that one of the removable tow arms was missing to etrailer within hours of receiving the baseplate. This was due to the shipping box being damaged during transit and likely just fell out. After four business days with no communication from etrailer I contacted Roadmaster. A couple of emails and they shipped the part. Very disappointed having to do etrailer's legwork. For this I will give etrailer one star.
The baseplate RM 524473-5 for a 2023 Ford Escape fit as expected sorta. Had to apply a 3 pound hammer as the mounting brackets were tweaked a little likely from welding and pulling a little out of square. I felt the instructions had a lot of reading between the lines, a couple of times I just about picked up the phone and called them to see if my interpretation was correct. But I just consulted with my analytical 15 year old grandson and we figured it out. (His 18 year old brother served to knock me to the floor and pull me back up again, faster than calling a crane service.)
My big complaint was that they could have provided actual measurements where to drill the Tupperware where the arms go through, there is a couple of reverence points that could be used. There was a few minor things that didn't/did need to be done but likely could easily be because of running production changes. (And better packing of 45 pounds of steel by RM)
The tow bars hook up easily to my dinghy car, a 2020 Ford Escape Hybrid. I like that the arms dis-attach easily and can be stored elsewhere. The tow arms attach quickly and easily to the baseplate arms. I do like this system. The installers put it in, so I cannot comment on how easy that was. I know the installers contacted etrailer for their questions, so I was glad to hear that.
The Roadmaster direct connect base was a perfect fit for my 2013 focus S to flat tow. We had it installed in about 3 hrs following the complete direction and pictures. I highly recommend using etrailer.
Good product. If you are reasonably handy and have some tools, you can install this yourself in a few hours. I'm a mechanic, it took me a little over 2 hours to install on my own toad. The fit is good, there are 4 holes you have to drill, otherwise it is plug and play. When you insert and twist lock the tow bar mounts into their sockets they feel a little sloppy but they are secure, and i never noticed any rattle when towing. Overall i give it a 4 out of 5 for easy install and clean look after install. Pic included of installed base plate.
Installed on my 2020 Jeep Cherokee for flat towing behind our motorhome . I wanted a tow bar connection that integrated with the front end of the Jeep and the removable arms did the trick . I had one issue with the driver side receiver bracket not lining up with the upper mount bolt hole on the Jeep, image 0547. Had to make a slight adjustment to the receiver bracket so the holes would line up, image 0551 and image 0559. The rest of the install went smoothly
I also installed the Demco braking Stay n Play Duo system , image 0565 which went in without any issues, image 6028. 7 thousand miles of towing later, couldn't be happier with the products
This is a rock solid baseplate. Installed on a 2023 Equinox LT (AWD). I followed etrailer's videos for installation and they are spot on. We connect with a Roadmaster Nighthawk tow bar, charge line kit, smart diode lighting kit, and a Demco Stay-in-Play supplimental braking system. It is fairly well hidden when not in-use. This setup is great!
I installed them on my new RAM 1500. Works great, very heavy duty. I also modified and attached a push bumper and used the Roadmaster base plates.
Exactly what I needed. Written jbstructuons were spot on and video was very helpful.
Installed on my 2020 jeep jl sport s with factory plastic bumper and plastic rock guard. Shane’s video was very helpful but I did not like how the metal plate behind the rock guard was cut away and how the rock guard had two big cut outs so I did some modifications. I cut two slots in the metal bracket and added angle brackets for extra support. As a result i did not use the supplied brackets for the rock guard. I created a template for the rock guard which resulted in two small cut outs. A lot of extra time but i am retired so time is relative. I think it looks great.
Installing on 2020 Jeep Trailhawk :
Pic #0557 : Roadmaster Base Plate Kit , Demco Supplemental Braking System , Diode Wiring Kit , Demco Battery Charge Wire Kit
Pic # 0548 ,0551 , 0559 Had to adjust the bracket plate to line up with the upper bolt holes
Pic #6028 finished install , mounted the operating unit to the top fuse box cover using automotive Velcro . Air cylinder , controller and LED light installed . Aside from the base plate bracket not lining up with the upper bolt holes I would give it 4 stars . My son in law is a master at solving mechanical issues .
Do you have a question about this Base Plate?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Paul
12/20/2023
Base plate has performed as expected in my first year of use. Instructions were wry easy to follow and install went well. Wet happy with the purchase