Mounting Grommet w/ Built-in Wedge for A91 or AL91 Series Lights - Black
(57 reviews)
Price: $8.20
In Stock
Mounting Grommet w/ Built-in Wedge for A91 or AL91 Series Lights - Black
Item # A91GZB
Our Price: $8.20
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (57)
- Q & A (0)
- Videos (1)
- Photos
Optronics Accessories and Parts - A91GZB
- Trailer Lights
- Mounting Hardware
- Grommet
- Optronics
- Rectangle
- 3-3/8 Inch Long
3-3/8" L x 2-1/8" W; black PVC grommet; built-in wedge; mounts A/AL91 Series lights at an angle; shock mount to lengthen lamp life
Features:
- Made of black PVC, grommet has built-in wedge
- Allows A/AL91 Series sealed marker and clearance lights to be mounted at an angle
- Provides shock mount to lengthen lamp life
- Measures 3-3/8" long x 2-1/8" wide
- Requires A46PB 2-wire straight pigtail for electrical connection
Black PVC grommet has built-in wedge that allows A/AL91 series lights to be mounted at an angle.
Provides shock mount to lengthen lamp life.
Requires A46PB for electrical connection.
A91GZB Optronics Mounting Grommet with Built-in Wedge for A-91 or AL-91 Series Lights - Black
Alternate part number: A-91GZB
California residents: click here
Video of Mounting Grommet w/ Built-in Wedge for A91 or AL91 Series Lights - Black
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Optronics Trailer Lights A91GZB Review
Speaker 1: Today we're taking a look at the trailer light mount and grommet with the built in wedge. It's made from durable black PVC construction. It allows A91, AL90, AL191, and AL91 series sealed marker and clearance lights to be mounted at a 15 degree angle.It provides road shock protection which extends the life of your trailer light. This area right here for the light, that cutout, that measures about two and 3/8th to two and 7/16th of an inch long. And then going this direction that's about one and 1/16th of an inch. It's a really nice, durable design.Overall length, it's about three and 3/8ths of an inch.
Going this direction, that's about two and 1/8th of an inch. And it's going to fit in a cutout that measures three and 1/8th by one and 3/4 inches. I do have a light that fits inside of this unit. You can see that the light securely fits inside the grommet, you just place it in, push it in, it's going to hold it in place, really gives a nice finished look to the light. On the backside you still have access to make all your wiring connections as necessary.That's going to do it for today's look at the trailer light mounting grommet with the built in wedge..
Customer Reviews
Mounting Grommet w/ Built-in Wedge for A91 or AL91 Series Lights - Black - A91GZB
Average Customer Rating: 4.9 out of 5 stars (57 Customer Reviews)
3-3/8" L x 2-1/8" W; black PVC grommet; built-in wedge; mounts A/AL91 Series lights at an angle; shock mount to lengthen lamp lifeby: Jerry 04/10/2024
Just what needed for my ezload trailer zx190 skeeter 2010 model
by: David 04/27/2024
Exactly what I needed
by: Tyler 03/13/2024
Exactly what I needed.
by: Mark 02/06/2024
Exact fit!!
by: Leslie 08/13/2022
Fit perfect was just what i had ordered .
by: John 09/10/2023
Was just as I ordered but I did not measure the opening so will have to get a smaller one my fault
by: Roger 06/21/2023
They too were exactly what they were supposed to be.
by: Joel 04/13/2023
Looks great on the trailer!
by: Stephen 07/07/2021
Product was as represented and delivered as promised .
I will be ordering any and all of my trailering needs from this site thank you very much.
Stephen
7/8/2022
Product is still all good .
by: Eric08/21/2018
The customer service from Etrailer is second to none. Quality products were delivered at least 2 days sooner than I would have suspected. My new marker grommets and lights make my Skeeter trailer look great again. Can't imagine going anywhere else. Thank you George !
by: Billy S10/31/2016
Product was ordered as a replacement for a ez loader trailer. One had been previously ordered from the dealer which was more expensive from the dealer which appears to be an identical product.
by: Frank04/09/2022
Perfect hard to find trailer light accessory for a “Skeeter” boat trailer.
by: Steve 05/17/2023
Delivered on time and items were as advertised. Great job!!
by: Christopher08/26/2018
I had a problem looking for this rubber mounting grommet, due to the wedge and size, but etrailer had it. Thanks to the phone tech I was about to give up.
by: Brian P09/04/2021
This was a hard part to find for ez loader trailer, but e trailer had it. Got to my residence in a timely manner.Thank you very much.
by: Larry M.05/17/2015
The product wedge design was 90* from the original, but I knew a grommet was necessary to mount the marker light replacement. The etrailer representative was very helpful in finding the solution part.
by: Ron 05/11/2023
Excellent services
by: Bobby 09/25/2019
Product was an exact match to the original one on my boat trailer! Very fast shipping!
by: Scott 07/19/2021
Good replacement for side marker on 2018 Ranger RT188 trailer.
by: Scot12/08/2021
My order arrived very quick and it was a perfect fit. Would order from etrailer again.
by: Scott 10/23/2020
Perfect fit! Exact replacement for my EZ Loader trailer.
by: Jerrell06/08/2021
Part worked very well. Took a lot longer to receive than expected but I think that was the USPS and not etrailer's fault.
by: Brett 07/10/2022
Perfect replacement for my Ranger trail boat trailer
by: Gary 03/08/2023
Quick response
by: G w05/26/2016
The product was inexpensive and worked great. It came to my house in great condition and was as promised.
25
57
Show More Reviews
See what our Experts say about this Optronics Accessories and Parts
- Optronics Mounting Bracket with WedgeI have a solution for you but I am sorry I am not seeing anything in our system or online with A-91G15B. It may be an outdated part that has been discontinued. I would guess someone just used a different mounting bracket on one of the sides. We do have an angled mounting bracket that is similar to the item # A91GB you referenced. It is Mounting Grommet w/ Built-in Wedge for A91 or AL91 Series Lights - Black item # A91GZB. The black PVC grommet has built-in wedge that allows A/AL91 series...
view full answer... - Replacement Wedge Rubber Grommet for Optronics A91 Series Clearance LightsIt looks like you're looking for the Mounting Grommet w/ Built-in Wedge for A91 or AL91 Series Lights part # A91GZB which has a built-in wedge and is designed for Optronics A91 Series Clearance Lights.
view full answer... - Replacement Clearance Lights For a 2017 Skeeter Boat TrailerLooking at images for a 2017 Skeeter boat trailer it appears they use the Mini Clearance/Side Marker Light # TN96MR on the rear of the trailer to fit into a 3/4" hole. And the Thinline LED Clearance and Side Marker Light # AL91AB just in front of the axles. This is a recessed style light that is 2-1/2" long x 1-3/16" wide. It is designed to fit in a Grommet # B150-181 or on a Mounting Bracket # 150-13. We also have Angled Grommet # A91GZB as this is what your trailer appears to use.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
Tyler C
Installed by:
Cole B
Updated by:
Brian T
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Leslie
8/16/2023
still working good