Hand Winch Cable with Safety Hook 1/4" Diameter x 50' Long - 3,500 lbs
(30 reviews)
Price: $66.07
In Stock
Hand Winch Cable with Safety Hook 1/4" Diameter x 50' Long - 3,500 lbs
Item # DL24104
Our Price: $66.07
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (30)
- Q & A (0)
- Videos (1)
- Photos
Dutton-Lainson Accessories and Parts - DL24104
- Trailer Winch
- Cables and Straps
- Wire Rope
- Dutton-Lainson
- 1/4 Inch Diameter
- 3500 lbs
- 50 Feet Long
Hand winch cable with safety hook.
Features:
- 1/4" Diameter x 50' long cable with safety hook
- 7 x 9 Galvanized aircraft cable
- Suitable for use on D-L hand winches up to 3,500 lb capacity
- Electric winch models SA9000 and SA12000
24104 Winch Cable and Hook 1/4" x 50' by Dutton-Lainson Model 6524
Video of Hand Winch Cable with Safety Hook 1/4" Diameter x 50' Long - 3,500 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Dutton-Lainson Trailer Winch DL24104 Review
Today we're going to be taking a look at part number DL24104. This is the Dutton-Lainson hand-winch cable with a safety hook. The cable itself is going to give us a 1/4" diameter. It's going to measure 50 feet long. It's going to have the forged steel hook on this end with the safety latch mechanism that is spring loaded. It's going to prevent accidental disconnecting or unhooking. This is a flexible 7 x 9 galvanized aircraft cable.
It is going to be suitable on Dutton-Lainson Hand Winches, up to a 3,500 pound capacity. It will work for StrongArm electric winches up to 3,000 pounds. It's going to have the safe working load limit for other applications of 1,400 pounds. Nice construction, very strong, and very durable. You can see here where the steel hook swivels around the cable.
Dutton-Lainson puts a nice steel plate in there. That's just going to prevent the cable from wearing or fraying. It's going to extend the life of the cable itself. Here on this end, you have the exposed cable end. This is going to be the end that gets anchored to the winch.
That's going to do it for our review of part number DL24104. This is the Dutton-Lainson hand winch cable with a safety hook. Again, you're going to have 50 feet in length. The cable diameter is 1/4". .
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Hand Winch Cable with Safety Hook 1/4" Diameter x 50' Long - 3,500 lbs - DL24104
Average Customer Rating: 4.7 out of 5 stars (30 Customer Reviews)
Hand winch cable with safety hook.by: Dana 03/19/2024
It is a great item pulling a race car into the trailer. Its holding up well and doing what it supposed too.
by: Joe W07/03/2020
I installed this on my Dutton-Lainson Hand Winch P/N DL11001. Both are in my 20 foot enclosed trailer in case I have to pull in a vehicle that won't run. The winch cable worked perfectly when I pulled my 3000lb tractor into the trailer as a test. I am pleased with this purchase. Jameson assisted me in picking out this product.
by: Jim04/12/2022
I love it George - very well made - I sprayed the cable I got with it - with lithium grease and after being outdoors for most of the year on my trailer it looks like new still! The worm gear set up with my high speed Milwaukee Fuel hammer drill (great torque - pro drill) works great.I use it to haul a small drift boat up and down steep inclines (drift boat for rivers - fishing) and it works well. I also added corrosion X grease to all of the winch's moving parts - New England weather is a good test for it.
by: steve1808007/25/2014
Hand winch is strong, larger than expected, and built pretty heavy duty. One thing to note, the pawl (clicker) is only one sided, so it won't hold the load when letting cable out. It would be nice if it had an extra little tab to allow cranking in, cranking out, and neutral (line pull out) positions.
Also, I'm new to winches, but kind of wish it had a clutch on the cable to keep tension on the cable spool. When nothing is on the line, the tension on the spool unravels, causing the cable go all over the place, the first time i used it, I slightly pinched the cable (I had half the line payed out, and the slack on that part got bunched up when I started pulling in)
I went with a cable instead of strap so that I could use a snatch block pulley if i ever needed extra power, and also ordered a cable twice as long as what I needed to allow for looping back (using it on a utility/car trailer)
Looking back I should have went with the shorter cable so that the line would be all the way out when starting to winch. I might cut down the cable to a shorter length and eventually replace it with a strap. Another drawback i found with the cable is that it tends to wander all over the drum back over itself if you aren't careful causing a tangled mess, but I guess that happens on the power winches too.
Another accessory I wish they had was a heavy waterproof drawstring bag to slip over the winch when not in use. I made a removable pedestal using 2" receiver tube, so I plan to keep the winch indoors. but I really should grease up the cable and it would be nice to have a cover. (Might try to make a bag or have one made)
Overall I'm satisfied and the winch itself more than met my expectations. I was able to easily pull a 2003 Grand cherokee up the ramps onto my trailer with one hand and single line.
by: John D08/14/2019
This winch has a lot of power, very smooth operation. It works great with my 1/2in battery powered drill. cable always winds perfect and tangle free. I use it to pull my 16ft jon boat out of the water on a makeshift ramp. the boat and motor is around 1000 lbs. its a very high quality winch and its made in the USA.
by: Bishop s Ag Services02/22/2017
Everything arrived in nice big box, packed well. Looks like perfect replacement parts. Fast ship time.
by: James09/28/2018
eTrailer is awesome. I ordered this product to place a Superwinch Terra cable and rolled on no problem.
by: Michael B09/24/2020
Was not easy to install properly - but now does the job.
When the trailer is parked outside cover it up so its not getting rained on - that will extent the life of that cable...
by: Jackie W.06/01/2016
Excellent. I probably could have used a much smaller cable, but it should handle any load I might have in the future.
by: Ken Showalter05/08/2015
The product was exactly what I ordered, but the service was really great and the staff was very friendly and knowledgeable. My purchase arrived a couple days early and the invoice arrived on the day of purchase. I work with many many companies and yours for service is one of the best. Thanks for your help in obtaining this cable. Ken
by: Jeff,michigan11/25/2022
nice works as expected
by: Slava A.09/21/2016
Very nice product! I am happy!
by: Aaron09/23/2017
Item as described
by: Raymond01/25/2018
No problems at all.
by: Chris02/26/2024
by: Tim G.05/30/2012
Looks like a high quality cable and the packaging was good.
by: mlp09/22/2015
Worked nice
by: Bryan 03/26/2020
Great
by: Douglas09/03/2020
by: Blake P.10/23/2015
Good price. Fast shipment.
by: Stephen 08/05/2021
As advertised
by: George 02/21/2024
by: Marty 04/08/2023
by: Dallas10/12/2021
by: Ed06/19/2021
25
30
Show More Reviews
See what our Experts say about this Dutton-Lainson Accessories and Parts
- Availability of Winch To Use With 1/4-Inch Wire CableIf you need to have a winch that uses a wire cable I do offer the Dutton-Lainson 1,400-Lb Winch, part # DL15303. This winch will accept either a 1/4-inch wire cable or a 2-inch wide strap. It will hold up to 40 feet of 1/4-inch cable or 31 feet of 2-inch wide strap. The part number for the cable would be # DL24104 and for the strap would be # DL24260.
view full answer... - Ceiling Mount System for Creating Bed LiftUsing the Tow-Rax L-Track # TWSP18DTAB is an interesting idea, though I cannot recommend using any type of track system on your ceiling to use as anchors as they are not designed for that. What that means is they are not tested for use on ceilings and don't have a weight capacity so I can't guarantee this would work, or even be safe. The best option we can provide is a winch, the Dutton-Lainson Hand Winch - Ceiling Mount # DL10954 with Hand Winch Cable # DL24104. I have provided a dimensional...
view full answer...
- Recommended Dutton-Lainson Freewheeling Brake Winch 1500 lbs. # DL14996I have a recommendation for you, but unfortunately we do not have a Worm-Gear Hand Winch that has a free wheel option. The closest winch we offer to fit your needs is the Dutton-Lainson Freewheeling Brake Winch with TuffPlate Finish # DL14996. This winch is self locking, has a weight capacity of 1,500 lbs. and has a free wheel option. The handle sits on the side and is not reversible. It does need at least 75 lbs. for this winch to operate properly and the handle is included with this...
view full answer... - Mounting Dimensions for the Dutton-Lainson Trailer Winch # DL14881I went out to our warehouse and measured the mounting base for the Dutton-Lainson Trailer Winch, item # DL14881. The flat part of the base measures 8-3/8 inches long by 5 inches wide. The elongated bolt hole at one end of the winch is 1-7/8 inches long and the 4 elongated holes at the other end are 1 inch long. The two round holes are 3/8 inch diameter. The distance on center between the long elongated hole and the first set of shorter elongated holes is 4-1/8 inches. The distance between...
view full answer...
- Recommended Worm Gear Winch for Tilting 2000-lb Well HouseWhile the 1.8K-rated Dutton Lainson winch # DL15502 has enough capacity for tilting your well house, in your particular application of using a winch to raise one side of a 2000-lb well house to allow servicing I recommend a worm gear winch for the most safety. Worm gear winches CANNOT reverse the direction of pull, meaning that the person working underneath that well house will have the peace of mind of knowing they will get to wake up in the morning. Dutton-Lainson winch # DL11001 has...
view full answer... - Winch Recommendation to Use as Hoist for Lifting Sign into AirThe only style of winch we offer that can be used to hoist something safely into the air is a worm gear winch like the Dutton-Lainson Hand Winch - Worm Gear - Loop Drive - Ceiling Mount # DL10954 that was actually designed to mount on the ceiling and hoist something into the air like you mentioned wanting to do. I attached a picture of two of these mounted on a ceiling for you to check out as well. For a cable then you'd want the part # DL24104.
view full answer...
- Winch Recommendation for Ceiling Hoist with Automatic BrakeFor that application you will want a worm gear winch like the Dutton Lainson Ceiling Mount part # DL10954 this is the best and safest winch we offer that you can use as a ceiling hoist that automatically applies a "brake" when you stop cranking the winch. I attached a review video for this for you to check out as well. For a cable then you'd want the part # DL24104.
view full answer... - Upgraded Winch Recommendation With Same Mounting Dimensions As Current WinchThe closest I can come to the same mounting holes you have for your DL1402A winch is part # DL14527. This is a 1,600-lb pulling winch and it has very similar mounting hole locations. I have attached dimensional drawings for the DL1402A and the # DL14527 winch you can check out. The mounting holes are nearly identical and I am sure the # DL14527 will work great for you. This winch does not come with the cable. For a cable I recommend part # DL24104. If you prefer a strap for the winch...
view full answer...
- Recommended Hand Winch for Low-Weight Lifting of Outdoor GrillThe best type of winch for your application is a worm gear winch like the Dutton-Lainson Worm Gear Hand Winch with Hex Drive # DL11001. I recommend this over a brake winch because it does not have a minimum load requirement, it allows you the option to use a power drill to operate it if you like, and it needs no mechanism to stop gear movement. With a worm gear winch unless you are cranking the handle (or using a drill) the winch simply cannot rotate. This is the best type of safety feature...
view full answer... - Recommendation for a Winch to Load a Harley Davidson Motorcycle into a Cargo TrailerYou would need to consult a qualified welder to have a mount fabricated that will allow you rotate the handle 360 degrees on a hand winch. We do not stock any bolt on parts that are heavy enough to be used to mount a winch safely in this case, and you would need to tie the mount into the trailer frame for stability. We have a Universal Hand Winch Right Angle Mounting Bracket, item # DL24110, which would make the fabrication of the raised mount easier. An option I would look at, would be...
view full answer... - Winch for Lifting and Suspending 2,000 lb LoadThe Dutton-Lainson StrongArm Electric Winch # DL24962 is designed for straight pulling and not really vertical pulling. Even if you were to mount it on a wall so the vertical pull would technically be a straight pull the winch wouldn't be able to suspend a load. Instead you need a winch that is designed to suspend a heavy load like that. For your application you need a worm gear hand winch. These operate much slower and are hand cranks (although you can connect a power drill) but they...
view full answer... - Winch Recommendation for Lifting 900 lbs 20 Feet HighA winch that you could consider using is the Dutton-Lainson Brake Winch, # DL14964, which would allow you to lift the 900 lb load 20 feet, with the 50 foot hand winch cable, # DL24104. This winch has the advantage of less moving parts and is a bit more economical. The drawbacks to this winch are that the winch will be harder to crank and there are not two speeds to select from. If you are lifting from the floor to an elevated position you could also use a block and tackle setup. The force...
view full answer... - Can Smaller Diameter But Longer Cable be Used with Dutton-Lainson Hand WinchSince the max cable capacity of the Dutton-Lainson Hand Winch # DL14825 is 5/16" x 47' you can definitely use the 1/4" x 50' Cable # DL24104 but you may have to cut off some of the length for it to fit properly on the winch (as it is 3' longer than the recommended size cable). Please note that the winch has a max weight rating of 2,500 lbs so even though this cable is rated for 3,500 lbs since the winch has a lower rating that is what you are limited by.
view full answer... - Can the Dutton-Lainson Worm Gear Hand Winch with Hex Drive # DL11001 Be Mounted VerticallyYes, the Dutton-Lainson Worm Gear Hand Winch with Hex Drive # DL11001 that you referenced could be mounted vertically like on the post that you referenced. I attached a review video for this winch for you to check out. For cable you might also be interested in the Hand Winch Cable with Safety Hook # DL24104.
view full answer... - Is Dutton-Lainson 3,500 lb Winch ReversibleYes, the Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 3,500 lbs # DL14881 is reversible. This winch does require a cable, the Hand Winch Cable with Safety Hook # DL24104.
view full answer... - Can Synthetic Wire Rope be Used with Dutton-Lainson Hand Winch I spoke with my contact at Dutton-Lainson regarding the 2-Speed Hand Winch # DL14881 that you referenced. She stated that they do not recommend using synthetic wire rope with any of their winches. This is because of how synthetic rope will get tighter as it stretches, which over time can actually cause damage to the winch drum. For this particular winch, I instead recommend using the cable # DL24104. This galvanized aircraft cable measures 50 feet long and includes a safety hook. I have...
view full answer... - Hand Winch Needed that will Accept 60 Feet of 1/4 Inch Wire Rope with at least 600 Pounds CapacityWe have several options that may work for your application. The Dutton-Lainson Hand Winch with TUFFPLATE Finish, Two Speed with Direct Drive - 1,800 lbs., item # DL15502, will hold up to 70 feet of 1/4 inch wire rope or cable. Next, the Dutton-Lainson Hand Winch with TUFFPLATE Finish, Single Speed - 1,800 lbs., item # DL14627, will also hold up to 70 feet of 1/4 inch wire rope or cable. Finally, the Dutton-Lainson Hand Winch with TUFFPLATE Finish, Single Speed - 1,600 lbs., item # DL14527,...
view full answer... - Recommended Tree Mounted Winch to Pull 3000 Pound Boat Up Slope on Log RollersWe do not offer any tree mount winches and a tree is not a recommended place to mount a standard hand winch. Normally in these situations, people mount a hand winch on a steel post held in the ground with concrete in order to support the weight. You'll need to make sure the winch pays out and reels in a straight line into the winch so it may need to be angled. When winching a boat onto a boat trailer a common ratio for determining your winch load capacity is 2 to 1. For example, a 5,000...
view full answer... - Two-Speed Trailer Winch for a 6,400 Pound Cabin Cruiser BoatThe Boat-size-to-winch capacity is generally 2 to 1. With good rollers and short winching distances, increase the ratio to 3 to 1. And with wooden bunks and long winching distances, reduce the ratio to 1 to 1. For example, a 2,200-lb boat generally requires a 1,100-lb winch. If the same boat were winched a short distance with a low incline and with rollers in good condition, it can be safely winched with a 900-lb winch. The boat requires a winch with a 2,200-lb capacity if you are winching...
view full answer... - Boat Winch Recommendation for a 4,500 lb BoatWhen it comes to choosing a winch for a boat trailer, there are a few general rules we can use. The boat-size-to-winch capacity is generally 2 to 1. With good rollers and short winching distances, the ration can increase to 3 to 1 and with wooden bunks and long winching distances, you will want to reduce the capacity to 1 to 1. So basically, you will want to look at the type and condition of the bunks on your trailer to choose the best winch. The Dutton-Lainson Hand Winch, # DL14825, will...
view full answer... - How to Select Appropriate Winch for Car Hauler TrailerBoth the Fulton # F142421 and the Dutton Lainson # DL15440 2-speed hand winches are rated for 3200-lbs maximum capacity. The Fulton works only with wire rope # FWC7500100 but the Dutton Lainson works with a wire rope # DL24104 or a polyester strap # DL24251. Although both are intended for use on a boat trailer they could certainly be used in a car trailer application so long as they offered the required pulling capacity. Most of the time car trailers use an electric winch, like one of...
view full answer... - Hand Winch with Largest Drum Capacity for 3/8 Inch Wire RopeThe Dutton-Lainson Hand Winch # DL15440 features the longest 3/8 inch rope capacity at 30 feet in length. This heavy-duty winch features a zinc TUFFPLATE finish to resist corrosion during marine applications and it has a 3,200 pound weight capacity. The handle is included and the unit is made right here in the USA. I have attached a short video demonstration on this winch that you can also check out.
view full answer... - Hand Winch Recommendation that has a Hex Drive for a DrillDutton-Lainson Hand Winch # DL15721 does not have a hex head that is fixed and would allow you to use an electric drill attachment. For that I recommend using worm gear winch # DL11001 which does have a hex drive and you can use a 5/8 inch socket attachment to power the load in or out. Worm gear winches are brake winches so when you stop turning the drum, either with the handle or a drill, it will hold the load. There is also no minimum load required. This winch can accept up to a 82 foot...
view full answer...
- Replacement Hand Winch Cable for a 2,000 lbs Capacity Shelby Brake WinchAs of October 2016 Shelby is owned by winch maker Dutton Lainson. If you are just needing to replace the 2,000 lbs capacity cable on your Shelby winch, I recommend the Hand Winch Cable with Safety Hook item # DL24104. This cable is 1/4" in diameter and 50' long and has a 3,500 lbs. If you're looking for a 2,000 lbs capacity winch you will also need the Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,000 lbs item # DL14730. This winch has a hand brake for manually...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Bishop S.
2/26/2018
So far the cables are fine and I had enough to fit both winches for our application.