Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch
(129 reviews)
Price: $34.24
In Stock
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch
Item # C58000
Retail:$36.97
Our Price: $34.24
You Save: 7%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (129)
- Q & A (0)
- Photos
CURT Accessories and Parts - C58000
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Flat
- 5 Flat
- 6 Round
- 7 Round
- CURT
Attach this electrical bracket to your 2" trailer hitch to make mounting your trailer connectors (sold separately) fast and easy. Use with a 6-pole or 7-pole round connector and a 4-way or 5-way flat connector. No drilling required.
Features:
- Electrical bracket lets you mount your trailer connectors to your hitch quickly and easily
- Holds (1) 6-way or 7-way round connector and (1) 4-way or 5-way flat connector
- Fits 2" x 2" trailer hitch receivers
- Sturdy steel construction is long-lasting
- Black powder coat finish resists corrosion
- Notched design allows for access to pin and clip or hitch lock
- Fast, simple, no-drill installation
- Fit bracket over hitch receiver opening and secure around lip with included hardware
- Dimensions: 10" long x 3-1/4" tall
- Edge is 1-5/32" at widest point
Specs:
- Overall dimensions: 10-1/2" wide x 3-1/4" tall x 1-1/8" deep
- Diameter of mounting hole: 2-1/16"
58000 Curt Easy Mount Combo Electrical Bracket for 2" Trailer Hitches - 4-Flat or 5-Flat and 6-Round or 7-Round Plugs
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch - C58000
Average Customer Rating: 4.6 out of 5 stars (129 Customer Reviews)
Attach this electrical bracket to your 2" trailer hitch to make mounting your trailer connectors (sold separately) fast and easy. Use with a 6-pole or 7-pole round connector and a 4-way or 5-way flat connector. No drilling required.by: Joe03/05/2023
Super easy to install. It's actually is more rigid/solid than I thought. Comes with all the hardware you'll need. Definitely a good compliment to a hitch that doesn't have a bracket welded on.
by: John03/29/2023
The part fit very well and seems sturdy enough. I used it last summer and it still seems to be holding up well.
John B.
3/30/2024
After one year, the product still worked great. It was stable and held up to use.
by: John06/29/2018
This bracket works well, but being at the same elevation as the receiver
opening. No more hitting the welded on RV connector bracket and tearing
up the connector. I cut my old bracket off as you can still see part of
it on my hitch. Painted the exposed metal to prevent rust.
A couple of suggestions for those installing this bracket. First use an
adjustable wrench and bend the top and bottom edges inward so the
bracket fits tight on your receiver end. Doing this will keep the
strain on the Stainless Steel M8 bolts used as they are too small to
bend the bracket edge and will snap off. Second use the appropriate
size metric wrench or socket to turn the nut. The nuts have an insert
to keep them from working off while driving, so no lock washers are used.
Installing the RV 7-way connector is just like installing it in any
other bracket, just locate the appropriate holes for your connector and
insert the screws. If your 7-way connector is plastic do not over
tighten the nuts. Installing the 4 or 5-way connector is even easier to
install.
John
6/16/2019
It has work great as expected. Did sell vehicle in March
by: Vicentino02/03/2024
Easy installation on my 2023 Hyundai Palisade. Looks good and fits well with my OEM 7 pin wiring harness which I recently purchased from my local dealer's parts department and installed myself - "plug and play" with the existing connections on my Palisade Limited.
by: Patrick N12/03/2016
Rocks, curbs, parking stops...Bend and destroy your last electric brake car-side connector bracket. Finally there's a solution for those of us with plastic bumpers who don't have a lifted 4x4 or stock through-bumper socket. This bracket safely puts the vehicle side connector at the same height as the receiver itself!
I installed it on a 2002 Toyota Land Cruiser with factor hitch but this could work for my wife's Subaru so I'll probably get her one too. Anyone who needs to install a trailer wiring connector on low vehicles or on vehicles with rubber/plastic bumpers now can have a better solution.
After ruining 3 L-brackets and $30 connectors I was about to build my own but gladly Curt created a solution. Installation of just the bracket was less than 15 minutes. If you have an existing 2" tube-style hitch. Without measuring the installation was universal for 2" receiver hitches. The only issue might be if your receiver hitch and bracket is too close to the hitch crossmember but I believe the bracket was flexible enough to adjust.
In my opinion, the bracket could be 1/8" steel plate in case you accidentally back the trailer into it but time will tell if that becomes an issue. The bracket comes with fastening hardware which presumably is stainless with lock nuts but including thread lock compound might be a good option. I was able to snug up the bolts enough that the bracket no longer flexed. We're having some rainy weather that's preventing me from rewiring the new female socket connector that I also purchased.
On a side note, my original female socket had the 4-pin connector built into it. Instead this time, I ordered the Curt #57674 4-Way to 7-way RV Blade & 4-Way Flat socket. One important not is if you use this option, the Curt Bracket includes a mounting bracket that will separately hold the 4-pin plug. It may be a cleaner install to use the Hopkins integrated 4-way/7-way adapter instead of using Curt's side mount bracket for the bracket in this review.
Overall, this will buy me some time before I have to upgrade my Land Cruiser to steel bumpers. Essentially this $20 product saved me from having to lift the vehicle to deal with the ground clearance issue. Preserving the low center of gravity and street appearance was important. Even with that said, if you do lift your vehicle its just really nice to get this electrical work up out of harm's way.
All in all, kind of a no brainer easy replacement and because there's a gap in the mounting bracket for the female socket, you may not even have to rewire to upgrade. Just slide the wires of the old socket through the gap and reinstall the screws.
by: Michael W.11/13/2017
Product is good basic design, remains to been seen how quickly bracket bends or distorts when plugging/ unplugging 7 way as thickness and strength is questionable.
It would have been a plus if product info informed buyers that some, including my Stowaway brand anti rattle hitch bracket cannot be used when using this c58000 wire holder. I have installed my anti rattle device upside down but not sure yet if going to work.
Michael W.
11/13/2018
after a year of daily trailer towing I can report that my concerns of the lightweight metal used in build has been a issue with bending so far no splitting of metal just keep bending back, also mounting hardware light duty. would I buy this product again yes but would seek a more secure way of mounting
by: Michael11/23/2023
Bent a little bit when I put on a anti-rattle device but other than that, it has worked as expected
by: Cliff07/27/2017
Nice black powder coat finish. Solid feel. Doesn't fit.
This Curt easy mount bracket doesn't fit my Curt class 3 trailer hitch #13355. Either the bracket is designed wrong or the chain hooks on the hitch are welded too close to the receiver collar. Can't install the screw and the bracket sticks out oddly at the bottom because of this.
One picture shows the gap of the bracket to the receiver collar and the screw unable to go through the hole, and the other picture has a closeup of the chain hook / bracket interface.
by: James11/22/2017
If I could give it 4.5 stars I would. Only less than 5 because the metal could be thicker. On the other hand, I could really tighten the screws at the receiver and bend the metal flush with the thicker collar and there is no wiggle. I had previously installed the Hopkins combo 4-flat with 7-round connector and it fit just fine as etrailer said it would. The only negative is Hopkins doesn't provide stainless steel screws for their connector. I also didn't install the harness according to the excellent video for my 2005 Sienna. Instead I ran all the wires inside the van by bringing them up through a grommetted hole already right where the connector belongs and then tucking them behind the trim panels all the way to the front. The door sill pieces come off easily to route wires under them.
by: Michelle04/07/2023
Fabulous bracket. Much more custom looking than the OEM bracket which has the 7pin plug hanging lower than the hitch receiver. Mine got bent and rusty backing into some snow. Pardon the oil spot on the driveway. I had to spray my hitch lock to get it to come loose.
by: T Day10/16/2014
This is a pretty elegant way to mount the 7-pin connector, especially compared to other options.
by: Jody C.06/11/2013
Received the part I ordered,was exactly what I needed.Enclosed is a pic of it installed.Thanks !
by: Vincent 10/18/2023
It wasn't perfect but once I put it on it is actually very good.
by: Robert 05/31/2020
This bracket provides a convenient and easy way to mount a 7 way trailer connector without hacking up your vehicle. Easy to install and sturdy.
Robert
5/31/2021
So glad I went with this option!! Looks great even after a year of usage.
by: Mark07/22/2023
Very easy to install and works as expec ted
by: Frank07/28/2018
( The product was Excellent and was made very well ) the problem was that it wouldn't fit my 2014 Toyota Tacoma pickup receiver. My receiver is a 2" and that is what it said to buy but it would not bolt on there is a flange around the outside of the receiver. The bracket fit around it just fine but the bolt holes were to closes in and the top and bottom flange on the bracket need to be longer and wider. I should have maybe tried the 2.5 I might have had better luck but I did what the information online told me to do.
Heather A.
7/28/2018
The OEM hitches on the Toyota Tacomas has a thicker width than traditional 2 inch hitch receivers. The width of the receiver including the walls is about 2-3/4 inches. The 2-1/2 inch Curt bracket will not work with the Toyota Tacoma either. You can always use a traditional 7 way mounting bracket such as part # 18138 for a 7 way plug and part # 18144 for the 4 flat.
by: Paul04/14/2019
Thank you for the fast shipping. This makes it vary easy to install a 7 pin adapter plug. Going on a hitch of a 2013 Lincoln mkx
Paul
4/15/2020
Working out great have 8x14 trailer with 7 pin bracket works great for plug
by: Derrick05/07/2020
Very Pleased with this product. Teresa was especially helpful in guiding my choice and providing a solution for my specific needs.
by: John05/25/2016
Very simple solution to mount your trailer connector. It is still working great. It has not loosened or in any way exhibited signs of weakening or failing. It does have one drawback of limiting the type of anti-rattle hitch attachment you can use, but that is easy to overcome by careful selection. Great product.
by: Phillip05/25/2018
It's been 4 seasons. No rust or damage. It does bend & give a little when the plug is pushed in or pulled out. I only wish the bracket is a little bit more rigid and a little bit slimmer so that it looks more integrated and open up for a little more room around the receiver for pin locks and such. Otherwise, it does what it's supposed to do. My installation is on a 2014 Odyssey.
by: Phillip D06/27/2014
A great & sturdy solution for adding wiring to a truck that was not a tow package. I had a flimsy mount screwed into the bottom square tube on my Curt hitch on my F150-it hung to low & was always getting bent out of shape. The design accommodates lots of screw patterns for the 7-way female plug and it worked great for mine. This makes a slick add-on that is much nicer cosmetically than the low-slung mount I replaced. It is heavy gauge steel and feels much more like a factory install. If you bend this mount you've probably done other damage! Great solution that was a cinch to install. I highly recommend!
Etrailer.com shipped when they said & I got it when promised. Buy your Curt products from them! You can buy other brands from them as well but I'm partial to Curt.
by: David05/14/2020
Thank you for your assistance, great products, and instructional videos! On my 2010 VW Touareg I had to A) install the T-one wiring harness, then B) install the Brake Controller 7- and 4-Way Installation Kit (ETBC7) with a C) Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch Item # C58000. Instead of drilling/cutting wires/etc. to get the T-one harness under the vehicle, I zip-tied the 4-pole connector from the ETBC7 to the hitch bracket, and when I need to tow a trailer, I simply drape the T-one 4-pole connector out the tailgate (as I would if I were pulling a 4-pole connected trailer) and connect the two harnesses. Simple install!
by: Karl07/24/2020
Curt needs some help with this product, good concept, execution not so good. Stainless nyloc nuts on stainless hardware is a NO NO without using anti seize, either provide some in the package or at least mention the need in the installation instruction. The 4 screws provided to mount the connector should be hex head with a flange for safer, non-damaging install, slotted head screws for an application like this went away in the 1950s. Whenever I receive one of the items, the clam shell package is open with all of the pieces floating around in the secondary packaging, hopefully all of the pieces are still there and the bare bracket has not damaged other items in the package.
by: Paul W07/13/2020
I liked this solution to mount on our Curt hitch. Works as advertised and have had no issues in the year it has been installed. Nice to have a no drill option and a mount for both 4 wire and 7 wire connectors.
by: Chris05/29/2018
Installed easily, but also bends easily. after a year of backing it into tall curbs it's a little loose on the hitch but is still secure and the bending doesn't seem to have done it any harm. the cut out to access the hitch pin is sufficient but a little tight for large hands. a little more material on the top support would get it 5 stars.
25
129
Show More Reviews
See what our Experts say about this CURT Accessories and Parts
- How To Secure Curt Echo On 2015 Audi Q5The best option to secure a trailer connector on a 2015 Audi Q5 with a trailer hitch like the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75940 is the Curt Easy Mount Bracket part # C58000. This will provide a safe and secure connection for the 7-Way RV Upgrade Kit part # ETBC7L and Curt Echo Wireless Trailer Brake Controller part # C51180. The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # C56404 is an excellent option as well.
view full answer... - Mounting Bracket for 7-Way Trailer Connector and Trailer Hitch 75338 on a 2008 Jeep Grand CherokeeDo not drill into the hitch because that is going to void its warranty and could potentially compromise the structural integrity of the hitch. I recommend the Curt Easy Mount bracket # C58000 which will allow you to mount the 7-Way without having to drill at all. I have included a link to a video review for you.
view full answer... - Recommended 7-way Connector To Use Curt Echo C51180 On 2020 Ford Escape TitaniumWe have exactly what you are looking for! Since your 2020 Ford Escape Titanium already has a 4-way connector installed you will need the # ETBC7L which was designed specifically for the Curt Echo Wireless Trailer Brake Controller # C51180 you have. The # ETBC7L will plug into your existing 4-way connector and just require two more connections. You will need to run the black wire to the positive terminal of your battery with the included 40 amp circuit breaker, and ground the white wire...
view full answer... - What Is The Easiest Trailer Brake Controller To Install In A 2021 Subaru Outback Wagon?I would be happy to help! There is not a 7-way connector or factory trailer brake controller port on your 2021 Subaru Outback Wagon so the trailer brake controller will not be plug and play, but I do have an option that is pretty close. First you will need to install a 4-way connector using the # 118467 which will plug into your Outback with no splicing. Next you will need to add the # ETBC7L which will plug into your newly installed 4-way connector and just require two connections. The...
view full answer... - Recommended Trailer Hitch and Wiring Bracket for 2020 Toyota Highlander XLE AWDThe Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C99FR is the correct hitch fit for your 2020 Toyota Highlander. You are correct it doesn't have a welded bracket for the trailer wiring connector, so I recommend using the Easy Mount # C58000. This will work really well with the wiring connector # 37185 you mentioned or the # ETBC7 kit if you are adding a brake controller. I don't recommend using any other hitch and this is the best option without connecting the wiring to...
view full answer... - Comparing Class III Trailer Hitch Receivers For a 2023 Subaru CrosstrekThe main differences between our class III receivers for your 2023 Subaru Crosstrek is the amount the receiver is visible. The Draw-Tite Max-Frame Trailer Hitch Receiver # 76209 is the most visible when it is installed. The cross tube along with the 2" receiver are both visible with this receiver. These can also affect your departure angle on steep driveways and on tall curbs. The cross tube does have a mounting flange to accept either a 4-Way Bracket # 18144 or 7-way Bracket # PK12711U....
view full answer... - 4-Way and 7-Way Trailer Wiring Harness For a 2023 Mazda CX-50 With Curt Trailer Hitch ReceiverCurrently the Vehicle Wiring Harness # C45FV is the only custom fit wiring harness available for your 2023 Mazda CX-50. This harness is for a 4-way flat connector that will fit most of the smaller trailers you may tow. This will likely be the most useful wiring as I see your CX-50 has a maximum towing capacity of 2,000lbs to 3,500lbs depending on your exact factory options. You can always check with your dealer to determine your exact towing capacity. A Mounting Bracket # C58001 will allow...
view full answer... - 7-Way Trailer Connector Mounting Bracket for B&W Hitch on a 2007 Chevy Silverado ClassicThe B&W trailer hitch # BWHDRH25182 does not come with the mounting bracket for a 7-Way trailer connector. A couple of cool 7-Way brackets that I like are the Curt Easy Mount # C58000 and the Draw-Tite box, # 18159. Either one will work with the B&W hitch on your 2007 Chevy Silverado. I have included links to videos on both products for you.
view full answer... - How To Mount a 7-Way On the etrailer Hitch Receiver for a 2019 Nissan PathfinderThe etrailer.com Trailer Hitch Receiver part # e98908 which is a fit for a 2019 Nissan Pathfinder does not have any sort of integrated trailer connector mounting bracket nor is there a similar option for the Pathfinder with this feature. However, you can use the Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors part # C58000 which will provide an easy to access spot to mount the trailer connector. That said, the options are limited for trailer connector mounting...
view full answer... - Class V Trailer Hitch and 7-Way Bracket for a 2003 Chevrolet Silverado 1500I do have an option but the Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center part # 41944 is not a fit for your 2003 Chevrolet Silverado 1500 as it is designed for 2500 and 3500 models. Instead, I recommend the Curt Trailer Hitch Receiver part # C15323 which has the same class V rating and 2" receiver tube opening as the above. This option however is made in the USA whereas the Draw-Tite is made in Mexico. The above Curt hitch is a bolt-on fit that does not require any drilling...
view full answer...
- Recommended Trailer Brake Controller and Wiring for a 2020 Honda OdysseyThank you for all of the information. I am more than happy to help you sift through the selection of brake controllers so you can choose the best one to use with your 2020 Honda Odyssey. Since you only stated as having the Draw-Tite Trailer Hitch # 76170 I'm going to guess you don't have any kind of wiring at the moment. To install a brake controller you're going to need a 4-Way wiring kit that activates the basic lighting on your trailer and then an adapter and extra wiring to use the...
view full answer... - 7-Way Mounting Bracket Recommendation for a 2011 Chrysler Town and Country with Curt HitchDue to how tight your hitch opening sits to the bumper of your 2011 Chrysler Town and Country I have a solution for you, but the Curt Bracket part # C58000 would not be it. Instead I would recommend the 7-Way Trailer Connector Mounting Box # 18159. This will strap around the cross beam of the hitch and will provide an excellent mounting bracket for your 7-way.
view full answer...
- OEM Tow Package Wiring Harness with 7-Way Connector for 2018 Honda PilotFor your 2018 Honda Pilot, I recommend the T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector # 118286. This harness will connect behind the rear bumper and the converter plugs into the factory wiring harness in your rear cargo area on the driver's side. The wiring includes all fuses needed to activate the tow package. Wiring also provides a connector for vehicles with the backup sensor that allows the sensor to continue working. It is a great option to save...
view full answer... - Comparing Curt Trailer Hitch Receivers # C99FR and C45CR For a 2022 Toyota HighlanderThe main difference that you will see is the Curt Trailer Hitch Receiver # C45CR has a visible cross tube where the Curt Trailer Hitch Receiver # C99FR has a hidden cross tube. So when you have these mounted on your 2022 Toyota Highlander Limited you will either see just the receiver slot and chain loops that hangs down, or you will see the receiver and cross tube that attach to the mounting plates on the left and right frame rails. I have included images so that you can see the difference...
view full answer...
- Recommended Trailer Hitch and Wiring for Towing with a 2019 Nissan PathfinderI recommend using the etrailer.com Trailer Hitch Receiver # e98908 for your 2019 Nissan Pathfinder because it is a Class III trailer hitch with a 2" receiver, a hidden crosstube, and a matte black finish that does a better job at hiding scratches and dings from road debris than the glossy black finish that most other trailer hitches have. Then for wiring I recommend the T-One Vehicle Wiring Harness # 118273 which comes with a 7-Way connector and all of the relays you need to activate...
view full answer... - Recommended Wiring Harness For A 2023 Ford Ranger When installing trailer wiring on your 2023 Ford Ranger I recommend the Curt T-Connector Vehicle Wiring Harness # C56431. The Curt harness comes with a 7-way trailer connector. The harness plugs into your vehicle's wiring harness, which is located behind the driver side rear bumper. To mount the harness you will also need the Mounting Bracket # C58000. It is also recommended that you use a small amount of grease # 11755 on all electrical connections which includes your vehicle and the 7-pole...
view full answer... - Adding a 7-Way Trailer Connector to a 2020 Ford Explorer Without Factory Tow PackageTo add a 7-Way to your 2020 Ford Explorer you first need the T-One # 118599 to add the basic trailer light functions. This tees in behind your tail lights and then draws power directly from your vehicle battery. Then for the 7-Way you also need the Universal Wiring Kit # ETBC7 which connects to the T-One and then has some wiring that is routed to the front of your Explorer. Since you have the etrailer Trailer Hitch # e29YR installed on your Explorer you'll need to use the Curt Mounting...
view full answer... - Does Curt 7-Way Wiring Harness Fit 2019 Ford RangerThe Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector # C56431 will absolutely fit the connector you have on your 2019 Ford Ranger. If you take a look at your photo as well as the accompanying photo I added from the install video of this harness on a Ford Ranger, you can see the connectors are exactly the same. I do recommend checking out the linked video install of the Wiring Harness # C56431 so you can see how easy it is. I also strongly recommend using Dielectric...
view full answer...
- Part Needed to Add Second 7-Way Trailer Socket to 2009 Chevy SilveradoTo give your etrailer.com Electric Jack with 7-Way Plug # EJ-3527-BBX its own 7-way socket you can add part # A10-7007. This harness plugs in between the existing 7-way and the harness that connects to it. Both the factory 7-way socket and the additional one will carry all light and power signals. No cutting or splicing needed. This kit includes zip ties to allow you to secure any excess harness length. You can use mounting bracket # C58000. Please keep in mind that adding the second 7-way...
view full answer... - Vehicle Wiring Harness Needed When Installing Trailer Hitch Receiver On a 2022 Honda PilotWith the etrailer Trailer Hitch Receiver # e98840 going onto your 2022 Honda Pilot you will need to decide what kind of towing you may be doing. The Tekonsha T-One Vehicle Wiring Harness # 118760 will give you a 4-way flat connector. This is most commonly used with smaller trailers that do not have brakes or separate batteries that require a vehicle charge. It can also be used with Auxiliary Lights # C53201 on cargo carriers or bike racks that impair the view of the tail lights on your...
view full answer... - Can Redarc Tow-Pro Elite RED44FR Be Installed On 2017 Subaru Outback Wagon To Tow Pop-Up Camper?If your pop-up trailer has electric trailer brakes then the Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional # RED44FR you were looking at is a perfect choice for a trailer brake controller, and will work with your 2017 Subaru Outback Wagon. Since you mentioned you only have a 4-way connector currently installed, you will need to install a 7-way connector, but the # 118290 you were looking at is only confirmed to fit the 2019-2021 Subaru Ascent. Instead you...
view full answer... - How to Remove Trailer Connector From Hitch Mounted BracketIt looks as if your hitch crossbar has been drilled into and riveted into place which is a BIG TIME no-no. The people that installed it should have known better as drilling into a hitch can weaken it's structural integrity. To remove the trailer connector from the bracket, simply remove the 4 nuts holding the connector onto the bracket. At the bottom of the bracket, there's a gap that will allow the wires to slip through. If you want to remove the bracket from the hitch, the easiest way...
view full answer...
- Best Wiring Brackets for a 7-Way Harness on a 2018 Mercedes-Benz Sprinter 2500To attach your 2018 Mercedes-Benz Sprinter 2500's factory 7-way to the Draw-Tite Max-Frame Trailer Hitch Receiver item # 75549 you will want to use the Mounting Bracket for 7-Way item # 18138. To attach it to the Curt Trailer Hitch item # C13388 you will need the Curt Easy Mount Bracket for 7-Way Trailer Connectors item # C58000. This bracket attaches directly to your receiver which allows for a clean no drill install. To round out your towing setup I recommend the Curt Towing Starter...
view full answer... - Recommended Mounting a 7-Way Trailer Connector on Hitch with Hidden CrossbarSince the Draw-Tite (hidden hitch) # 76025 crossbar on your 2014 Honda Odyssey is not accessible you can either mount the bracket directly to the fascia or use another style bracket. I recommend using the Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch # C58000 which mounts to the receiver tube collar. This will allow you to mount the 7-way of your # ETBC7 kit.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video by:
Zack K
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Joe
3/6/2024
still going strong a year later. Still supper happy.