Cargo Van Mats Specs:
Features:
Protect the floor of your vehicle and get a slip-resistant, heavy-duty thermoplastic work surface backed with a 1/2" thick cushion for your load. A durable VanTred cargo van mat is great for tough, commercial applications and frequent use.
Tech Tip:
Mat is sized for models with the Wall System along side walls. If your van has bare walls with exposed ribs, mat only extends to the ribs and so there will be a small gap along the side walls between those ribs.
More Information >Cargo Van Mats Specs:
Features:
Protect the floor of your vehicle and get a slip-resistant, heavy-duty thermoplastic work surface backed with a 1/2" thick cushion for your load. A durable VanTred cargo van mat is great for tough, commercial applications and frequent use.
Tech Tip:
Mat is sized for models with the Wall System along side walls. If your van has bare walls with exposed ribs, mat only extends to the ribs and so there will be a small gap along the side walls between those ribs.
More Information >Cargo Van Mats Specs:
Features:
This cargo van floor mat looks and feels like soft carpet but stands up to rugged use. The 3/4" thick cushioning adds cargo protection plus dent resistance for your vehicle's floor, and the non-skid surface is perfect for fragile loads.
Tech Tip:
Mat is sized for models with the Wall System along side walls. If your van has bare walls with exposed ribs, mat only extends to the ribs and so there will be a small gap along the side walls between those ribs.
More Information >Cargo Van Mats Specs:
Features:
This cargo van floor mat looks and feels like soft carpet but stands up to rugged use. The 3/4" thick cushioning adds cargo protection plus dent resistance for your vehicle's floor, and the non-skid surface is perfect for fragile loads.
Tech Tip:
Mat is sized for models with the Wall System along side walls. If your van has bare walls with exposed ribs, mat only extends to the ribs and so there will be a small gap along the side walls between those ribs.
More Information >Videos
for Cargo Van Mats
Help Articles
for Cargo Van Mats
Expert Answers
for Cargo Van Mats
The custom fit VanRug made for your 2015 Sprinter 2500 with 144in wheelbase is VanRug Custom Floor Mat for Cargo Vans - Charcoal Gray - Carpet #VRMS06M. It is designed for the cargo Sprinter Van and extends from behind front seats to under cargo…
view full answer...Hello John. The Hot Dot LEDs #328-003-17A you were looking at are definitely a good option. Especially is you need something with the 2" center on center for the holes. We do have two other options for you to look at, take a…
view full answer...I suggest the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75912. It is a no drilling required install and takes the shortest amount of time to install in relation to other hitches for this model.…
view full answer...There are 4 slits in the VanTred Custom Floor Mat for Cargo Vans #VTTC14L (see attached) that I believe are for the D-Rings you're talking about. If your D-Rings are in a different location then you can cut into the mat for…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...The VanTred Custom Floor Mat for Cargo Vans #VTNV11 is going to extend from the back of the front seats all the way to the plastic shroud of the back cargo doors. I've attached a video below that displays this.
view full answer...For your 2021 Chevrolet Blazer you're going to need to start with a base plate kit. Since there aren't any Blue Ox base plates I'd recommend going with the Roadmaster Direct-Connect Base Plate Kit…
view full answer...For your Sprinter 2500, I recommend the Curt Trailer Hitch Receiver #13358 that will do a great job for your bike carrier and more should you decide to tow later. This hitch model is designed for either the 144" or…
view full answer...There is a trailer hitch receiver that fits your 2024 Mercedes-Benz Sprinter 2500, made by Curt. The correct part number is the following: - Curt Trailer Hitch Receiver #C13388
view full answer...Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The…
view full answer...I spoke with my contact at BedRug and the VanRug Custom Floor Mat, #VRG96, was designed for the 1996 - 2014 Chevrolet Express Cargo Van with standard wheelbase. In order for this mat to work in your 2014 Chevrolet Express 3500 passenger van, you…
view full answer...Filter Products (8)
Contact and Help
What our customers are saying:
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD