Yakima MegaWarrior Extra Large Cargo Basket Review Video

Unfortunately the design of the Tyger roof baskets will not allow any accessories to be attached to the basket. A basket that would be able to handle accessories attached to the rack would be the Yakima OffGrid Roof Cargo Basket - Steel -…

The Yakima SkyBox NX 16 Cargo Box #Y95AV measures 35-inches wide at its exterior. I checked the specs for your car's factory roof rack, but the crossbar side-to-side length is not noted on the Subaru website, only the roof's 150-lb…

For your 2008 Hummer H3, I recommend checking out the Yakima MegaWarrior Extra Large Roof Rack Cargo Basket #Y07080-82. This cargo basket will easily attach to a set of crossbars like the Yakima HD Crossbars #Y01156, measures 74" long x…

We have exactly what you are looking for. The Yakima A Anchor plates #Y8810074 you purchased are designed to work with the Yakima Landing Pad 1 #Y00221 which is not what is in the picture of the landing pads you purchased so you will need to…

Since you want to change your trailer hubs to the 5-on-4-1/2 bolt pattern I suggest you select a 60-inch axle kit that includes idler hubs, such as one of the two kits shown on the linked page. These two 2K-rated axle kits include 5-on-4-1/2 hubs,…

From my research on the Harbor Freight 4x8 folding trailer uses 4.80-12 tires on a 12 inch wheel for the 1195 lb capacity trailer and a 5.30-12 for the 1720 lbs capacity trailer. It is a good idea to check your existing tires to see which size they…

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain…

My Retrax representative has confirmed that the Rhino Rack #RRVA180B-RRRLT600 roof rack quick disconnect feet and the 71 inch crossbar are indeed compatible with the accessory slots in the rails of your Retrax Pro XR tonneau cover. I've…

I reached out to my contact at Rhino-Rack and she reported that the Rhino-Rack #RRRLT600 legs will fit into RTC tonneau cover channels. Then you will need the Rhino-Rack #RRVA180B cross bars to fit into those legs.

The Thule Force XT has one of my favorite mounting systems across all roof boxes. The clamps make it easily compatible with most roof racks. Your 2020 Toyota 4Runner factory rack is one of them. You have options when it comes to sizes, in my…

The Yakima Replacement Anchor Plate Style-A, Part #Y8810074, comes as a set of 8 plates that measure 3/4-inch x 7/8-inch. The centered threaded hole measures 0.2 inches (or 5.1 millimeters) in diameter. Please refer to the photo provided. The…

The best option we have for you to store your spare tire would be on the roof of the vehicle with a roof rack and cargo basket. This option will be a bit of a struggle to get the tire off and on the roof but I would hope you do not have a flat tire…