TruRyde EZ Lube Drive in Grease Cap Review Video

From the information that I was able to find on the L44549 bearing, it shows it being a 1-1/16 inch bearing which is the same as Trailer Hub Bearing, #L44649. Just to be sure, I recommend measuring the L44549 bearing with a digital caliper to confirm…

The bearing part #L44649 has an inner diameter of 1.063 and is typically used in 3,500 lb axle hubs and the #L44643 has an inner diameter of 1 inch and is typically used on 2,000 lb axle hubs. If you can get me more info on your trailer like axle…

The main differences between the two trailer tire sizes you referenced are the outer diameter for the two and the capacities available. For the 4.80-12 tires they are 20.5 inches in overall diameter and have 785 and 990 lb capacities available. For…

The Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B #AM30590 have a max speed of 65 mph. When trailer tires are not speed rated with a letter, the default is 65 mph max. I've attached an article to…

It sounds like the seals have failed and the grease from the bearings has come out during travel. Also it is possible that if you have an EZ lube axle with a grease zerk at the end to add grease but use a single lip seal, the pressure can blow out…

When installing trailer hub grease seals you want to install them flush with the surface of the hub.

The Dexter Trailer Hub Assembly you referenced, part #AKIHUB-440-2-1K is known as an idler hub. An idler is a hub that is no provisions for trailer brakes. It has no brake drum. Part #8-276-5 is an example of a hub/ drum that has a brake drum that…

From what I have found, your T-23979 is the same as the Dexter 010-010-00 seal. This has a 2.125" inner diameter and 3.376" outer diameter. The correct replacement would be the Grease Seal - Double Lip - 2.125" ID - 3.376" OD -…

I spoke with my contact at Everchill regarding the Mini Fridge #324-000110 that you referenced and she said there are a couple primary differences between it (along with all of their other RV refrigerators) and standard household units. The first is…

Since trailer tongue weight can be up to 15 percent of total trailer weight an 800 lb tongue weight system like what you have would work great on your trailer that has a GVWR of 5,900 lbs.

In order to find the correct bearings, you'll need to remove a hub and read the reference numbers off the inner and outer wheel bearings. If you cannot read the reference numbers, use a digital caliper and measure the inside diameter of the inner…

The manufacturer's part number for the Kenda #AM10208 is 10208, as shown in the snip from their product catalog. If you click the provided link, you can see a product description video featuring the Kenda #AM10208.