SureCan Utility Jug Review Video

The Curt Adjustable 2-Ball Mount #C45902 is manufactured overseas. If you are looking for a similar made in the USA adjustable ball mount the Flash Solid Steel HD Adjustable 2-Ball Mount #FA49-00-5625 has the same 2-1/2" receiver, 6" drop,…

The weight of the Flash Solid Steel HD Adjustable 2-Ball Mount #FA49-00-5625 that you referenced is 37 lbs, and the weight of the Curt #C45902 is 36 lbs. So in that regard they are essentially the same. They really are quite a bit alike in most ways.…

To adapt your 2-1/2" receiver to accept your 2" bike rack you will want to use the B&W Hitch Receiver Reducer Sleeve item #BWRHXA2182. This reducer sleeve slides directly into your 2-1/2" receiver and does not extend past it by…

Fastway has an all black adjustable ball mount that fits 2-1/2 inch hitches and has 6 inches of drop with the part #FA49-00-5625. Fastway is made by same company as #DTALBM6625-2S as well. Or for a totally black version of a similar ball mount we…

If you use a hitch reducer like the Blue OX #BX88187 for your 2-1/2 inch hitch, you may need a longer bolt. The bolt that comes with our 24x60 cargo carrier #e98874 has a overall length of 3-9/16 inches and a usable pin length of 2-7/8 inches. If the…

Yes, the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers #325-GH-924 can be used to mount your debris loader and tow your landscape trailer. This ball mount will not decrease the capacity of your hitch and it is more than capable of handling the…

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls - 15K #C45949-22516 does have the ability to utilize a pintle hitch. The Curt Pintle Mount Attachment for Rebellion XD Adjustable Ball Mount #C79FR can be…

If using a pintle hook combo such as #C48200 and coupling to the ball then the latch part would not be able to come down far enough to insert the pin to hold it in place which is fine because the coupler locks onto the ball. Looking through the other…

The Curt Rebellion XC cushioned ball mount part #C83WR would cushion the ride quality and reduce the movement you are experiencing but an easier and most cost effective solution would be an anti-rattle device like the etrailer #e99007 which will lock…

As your 24' Legend 12,000lb aluminum equipment trailer has torsion axles there is nothing that can be added to these to improve the bouncing that you have. Being that your trailer is constructed of lightweight materials and has such heavy duty…

Since you have such a light boat trailer I recommend the Curt Rebellion XD #C83WR. This will work better with the lighter amount of tongue weight that you have of 400lbs. The hitch will also be much easier to use for you as it weighs only 43lbs…

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount part #C83WR won't work with a weight distribution system due to the design of the adjustable shank but we do have a very similar option that will, the Gen-Y Torsion Weight Distribution…