Rhino Rack Roof Rack Review - 2013 Cadillac SRX Video

Products Featured in this Video

Review of the Rhino Rack Roof Rack on a 2013 Cadillac SRX

Today, on our 2013 Cadillac SRX, we will be test fitting the Rhino-Rack roof rack using part numbers RRVA118B-2 for the vortex crossbars, front and rear, and part number RRSX001 for the rail leg kit as you can see here. To begin our test fit I will go ahead and show you how to slide this onto our crossbar. You'll want to make sure that this is face up like this and it feeds in through the notch… see more >

Info for this part was:

Video Edited:

Zack K

Video Edited:

Joshua S

Video Edited:

Jacob T

Video Edited:

Dustin K

Video Edited:

Chris R

Video Edited:

Zach D

Video by:

Andrew K

Video by:

Kathleen M

Video by:

Jonathan Y

Video by:

John S

Video by:

Thomas T

Video by:

Schuyler H

Video by:

Charles A

Video by:

Cooper S

Test Fit:

Colin H

Test Fit:

Sabrina B

Test Fit:

Randy B

Test Fit:

Hayden R

Test Fit:

Keith V

Test Fit:

Savanna B

Test Fit:

Conner L

Test Fit:

David F

Test Fit:

Evangeline M

Test Fit:

Ethan H

Installed by:

Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Explore Expert Info

Most Popular Wheel Bearings

Determining Trailer Tongue Weight

What is the Difference Between a Class II and a Class III Hitch?

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

What Roof Rack Kits Will Work with the RetraxPRO XR Hard Tonneau Covers

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

What is the Difference Between a 4-Way and 7-Way Trailer Connector

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Comparing Thule AeroBlade Crossbars vs WingBar Evo Crossbars

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

What Is An OEM Prep Package And How Do I Know If I Have It

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Roof Rack Recommendation for 2007 Dodge Ram Truck with Leer Canopy

Thanks for reaching out, Joe! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B which comes with 63" long tracks as well as 54" long crossbars which should give you a little bit of overhang on your canopy. Per…

view full answer...

Thule Rooftop Cargo Box Compatibility With Rhino Rack Crossbars

If you are using the Rhino-Rack Aero Bar Crossbars like #RRVA137B they have a dimension of 54" long x 3-1/8" wide x 1-3/16" tall which works for Thule boxes that use the PowerClick quick-release clamps, including the Thule Vector…

view full answer...

EcoHitch Invisi Trailer Hitch Compatibility For A 2013 Subaru Impreza Sport Hatchback

Yes, the EcoHitch Invisi Trailer Hitch Receiver #306-X7211 is confirmed to fit your 5 door 2013 Subaru Impreza Sport Hatchback that has the single exhaust tube. Your Impreza must have the knockout panel in the center or the lower rear fascia to use…

view full answer...

Availability Of A 1-1/4" Draw Bar And 1-7/8" Ball With 0" Of Rise

Happy Monday to you as well! I do have a potential solution for you. We do not carry a draw bar with a true 0" rise, but what you can do is use the Curt Class 2 Drawbar #C45503. This has a 3/8" rise, and will be the closest thing we have to…

view full answer...