Performance Tool LED Safety Flare Review Video

One afternoon a while back I was with a friend and we decided we needed a quick pick-me-up so we stopped at a coffee shop. He got a plain ol' coffee and I got an espresso; since espresso has more caffeine in it, I queried his decision. His…

Replacement Velcro strip #A60270 does not have an adhesive back. It fits into a channel on the side rails on Access Tonnosport and Vanish tonneau covers. If you can tell me which tonneau cover model you have I can determine if we have the…

The Truxedo #A60270 is the hook portion of the Velcro fastener, and is held on by self tapping screws that attach the strip to the side rail. As long as its one inch width fits in the available channel and the Velcro sewn into the tarp is the loop…

There is a small slot the bottom of the Light-Up Trailer Hitch Receiver Cover #CR-007. If you ever needed to remove the lens, you'd insert a small slot screwdriver into the slot and pry the lens up to release and remove it. In general, this does…

I called my contact at Pilot and asked about the Light-Up Trailer Hitch Receiver Cover, part #CR-007. They told me the light bulbs are part #A1157B and are replaceable.

The Light-up hitch cover #CR-007 uses 1157 bulbs such as #A1157B. If you want to switch to LED bulbs that would have to be red such as #P341157R-360. If you used white bulbs then the lights would appear pink instead of red. Even though the bulbs will…

I spoke with my contact at Pilot and he stated that the Light-UpTrailer Hitch Receiver Cover, #CR-007, has an incandescent bulb. I have included a link to a video review for you. If you are looking for an LED version of this, we have the Flint Hill…

The Curt Wiring Harness #C55382 connects behind the tail lights of your 2002 Jeep Liberty. So you need a connector on each side to power the 4-pole. However, the Hopkins Harness #42475 connects behind a panel in the rear compartment on the passenger…

The biggest difference will be price. The two harnesses are basically the same harness made by two different companies. The Curt part #C55382 would be what I would go with over the Hopkins #42475 because the price is better and because we seem to…

This installation requires that you remove the front bumper because the hitch receiver is completely hidden once it is installed. You will not see the cross tube for this hitch receiver, at all, when looking at the front of your 2019 Ford F-250. In…

The EcoHitch front hitch part #306-X7904 that you referenced is a confirmed fit for your 2020 Ford F-350 Super Duty. There isn't any drilling required to install this but there is some trimming of a plastic insert that's present in the…

The EcoHitch front hitch part #306-X7904 does fit your 2018 Ford F-350 and it uses 6 bolts to secure to the truck frame. The other four bolts aren't as easy to see in most of the product pictures but I attached a picture that shows you where they…