Yakima FatCat EVO Ski and Snowboard Carrier Review - 2021 Ford Bronco Sport Video

Since your 2015 Nissan Xterra has factory crossbars installed on it the simplest and most cost efficient solution is going to be to install a rack on them that attaches directly. The Yakima FatCat 6 part #Y03096 would be a fantastic option that I…

If you have a Fatcat Ski Carrier the brackets you actually want are the part #Y8860081 which are designed to fit the standard Yakima and Thule crossbar dimensions. Which is right at 1-1/8 inch. Neither bracket would fit a Thule Pull Top.

I checked with Yakima and just the top piece of the Replacement Mounting Hardware kit part #Y8860048 is not available so you'd have to order the entire thing.

The Replacement Mounting Hardware for Yakima FatCat Ski and Snowboard Carrier #Y8860048 comes with 1 piece. So you will have to select the qty you want before checkout. Replaces lost or damaged universal mounting brackets for Yakima FatCat 4 or…

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

Based on the dimensions you mentioned the correct Dexter EZ Flex kit you would need is the part #K71-654-00 which is compatible with what you have and will do a great job improving ride quality.

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

That is an excellent question and is asked more often than you think. Electric brakes like what come in the Electric Trailer Brake Kit #AKEBRK-2 can be submerged in water when you are loading/unloading your boat. Since water and electricity don't…

I'm assuming your Express doesn't have the 7-way, but does have the capped round plug behind the bumper on the drivers side frame rail, you'll install part #30955. Simply remove the cap and plug the connector in. To wire up the controller…