WeatherTech 2nd Row Rear Floor Mat Review - 2019 Chevrolet Colorado Video

Products Featured in this Video

How to Install the WeatherTech 2nd Row Rear Floor Mat on a 2019 Chevrolet Colorado

Today on our 2019 Chevrolet Colorado, we're going to be taking a look at, and showing you how to install the WeatherTech Second Row Rear Auto Floor Mat. This is available in black under part number WT447512, and also available in cocoa under part number WT477512. For a quick comparison, we'll put our factory mat on top of our WeatherTech. Now, right away you'll notice that the factory mat extends… see more >

Info for these parts were:

Test Fit:

Colin H

Video Edited:

Chris R

Video by:

Jacob H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Explore Expert Info

Most Popular Wheel Bearings

Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)

Brake Controller 7- and 4-Way Installation Kit (ETBC7)

How to Measure for Trailer Hitch Drop

How to Choose the Right Trailer Hitch Class

7 Common Questions Everyone Has About Trailer Tires

Trailer Maintenance Schedule

Determining Trailer Tongue Weight

Stability Control for Heavy Duty Vehicles

The 5 Best Trailer Drop Hitches You Can Buy

Lug Nut Torque Chart for Trailer Wheels

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

What is the Difference Between a Class II and a Class III Hitch?

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Tonneau Cover and Ladder Rack Rated For 1,000lbs On a 2023 GMC Sierra 1500 Standard Bed

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Waylon, it does look like the Dexstar Steel Mini Mod Trailer Wheel #AM20539 is the same thing as the Dexstar 17-233 wheels you're referring too. These are silver wheels with a 6 on 5 1/2 bolt pattern, a 0 offset, and are made in the USA.

view full answer...

How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

view full answer...

What is the Difference Between a 4-Way and 7-Way Trailer Connector

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...