Trailer Hitch Installation - 2018 Nissan Murano - Draw-Tite Video

For your 2018 Nissan Murano the Draw Tite hitch part #75952 is the best option. It has the best towing capacities at 4,000 lbs trailer capacity and 400 lb tongue weight as well as best price. I attached an install video for this hitch for you to…

According to the manufacturer, the etrailer brand #e98907 Class III hitch will affect the rear liftgate sensors, but only in that the area right under the center of the bumper. If you try about one foot to either side of the hitch receiver tube,…

The tire should be mounted so the yellow dot is next to the valve stem. The yellow dot indicates the low, or lightest point of the tire. It's placed next to the valve stem because the valve stem adds weight, so aligning these two points…

For a trailer wiring harness for your 2017 Nissan Murano you'll want the Tekonsha kit part #118660 that is sold separately from the hitches like the part #75952 that you referenced. Not everyone who installs a hitch plans to tow (or needs trailer…

Typically the yellow dot indicates the point on the tire that SHOULD be mounted next to the valve stem for the best balance. The red dot is the uniformity mark. As well as not being able to manufacture perfectly weighted tires, it's also nearly…

Since manufacturers sometimes make small changes to the instructions we try to refrain from posting specifics for torque ratings on a page like this but I have linked the written instructions for the Draw-Tite Max-Frame Trailer Hitch Receiver #75952…

The Curt Class III 2 Inch Hitch, part #C13577 for your 2009 Nissan Murano comes with four M12 x 1.25 x 30mm hex bolts. The torque ratings are listed on the instruction sheet, toward the bottom of the page, I've linked the instructions for you. If…

The interior dimensions of the 23" x 51" UWS Cargo Carrier for 2" Hitches #UWS65XR is 20-1/2" x 48 1-/2". As far as a floor, there is not a traditional floor but there are strips of aluminum that line the bottom vertically…

To my knowledge, none of the manufacturers offer cargo carriers in any finishes other than paint or powder coat. I would recommend getting this aluminum carrier #C18113.

It is not uncommon for there to be some movement in the system when a trailer is not loaded. If this movement is causing rattle you try adding our Pro Series Anti-Rattle Device for 2" x 2" Trailer Hitch Receivers #PS63091. This device will…