Tekonsha ZCI Circuit Protected Vehicle Wiring Harness Installation - 2017 Porsche Cayenne Video

I do have an option for you but the only way you'll get away with carrying four total kayaks hull down is a double decker trailer like the Yakima EasyRider Double Decker Trailer part #Y08129. The lower deck is only 54" wide so you'll…

Yes, the Tekonsha trailer wiring harness part #C56434 is a confirmed fit for your 2023 Toyota RAV4 Adventure.

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #C56434 will certainly work with the 2020 Toyota RAV4 LE Hybrid model. The Curt is designed for all models of the RAV4 so it will work well for you. The installation…

I took a look at the Yakima Rack and Roll #Y08106 that you're inquiring about, and it turns out you can actually stand this kayak up completely like you're wanting too. You are just going to have to remove the wheels and the tongue, which is…

The tongue of the Yakima Rack and Roll Trailer, #Y08106, is 2 inches x 2 inches. We have this trailer on our lot, so I made a short video for you showing a few different dimensions of the trailer for you. If you are looking for a lightweight jack…

The Yakima Rack and Roll Trailer #Y08106 referenced in your question will work great for your longer trips on the highway. I also spoke with my contact at Yakima to verify this. The hubs on this trailer use sealed bearings, so they will not need any…

I spoke to my contact at Yakima and she informed me that since your kayaks will be behind your vehicle and not on top it is not as important to have the kayaks strapped down when used on the Yakima Rack and Roll Trailer #Y08106. She did recommend…

I was unable to find an order number for you, so if you need a new Spare Tire with 5 Spoke Rim for Yakima Rack and Roll Trailer #Y08121 you can purchase a new one here, or if you can contact Yakima for their warranty, which does have a lifetime…

The likelihood that your problem is the valve stem on your Rack and Roll trailer #Y08106 is pretty low but if you have a valve stem tool you could try a different one or see if yours is loose. Most likely it's the inner tube though and the…

Yes, the Curt Trailer Hitch Receiver 13566 #C86FV and the T-One Vehicle Wiring Harness #TK46VR are the correct parts to fit your 2023 Mitsubishi Outlander PHEV. I have linked the installation instructions for both of these below if this is something…

The only wiring that we know will work with your 2023 Mitsubishi Outlander PHEV at this point in time is the Curt Upgraded Circuit Protected Powered Tail Light Converter #C59496 and the ZCI Wiring Kit #119250KIT. The Curt wiring splices into your…

For the Yakima Rack and Roll Trailer part #Y08107 the height from the ground to the top of the inside of the coupler where the ball sits is 22 inches so then from the bottom of the coupler lip to the ground measures 20 inches when the trailer sits…