Stealth Hitches Hidden Trailer Hitch Installation - 2013 BMW 3 Series Video

The only hitch I can safely recommend for your 2009 BMW 328xi is going to be the Curt hitch part #C11033. The Draw-Tite part #24857 hasn't been confirmed as a fit for the 328xi so I can't safely guarantee that it would fit. If you are sure…

I can check to see if we have anything for a 328i. What year and is it a 2 door, 4 door or wagon?

Unless you are towing all the time it is a good idea to store your 4-pole wiring harness inside the car to protect it from the weather and potential damage. Yes, many folks prefer an external mount and hitches often come with a mounting bracket to…

I have an answer for you. When it comes to using a hitch adapter on your 1-1/4 inch hitch to accommodate a 2-inch accessory, it is important to note that any time you use an adapter/extender, you will be decreasing the overall weight capacity of the…

You will only need one wiring harness to complete the trailer wiring on your 2011 BMW 328xi. The wiring harness that I would recommend for you is the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit…

I may have a solution for you, but the Curt #C11033 is only a confirmed fit on the 328xi Sedan and the Draw-Tite #24857 is only a confirmed fit on the 328i Sedan, so these hitches won't work for you; the bumper isn't necessarily the deciding…

Though The Stealth Hitches Hidden Rack Receiver #SH46FR is confirmed to fit your 2019 BMW X3 this hitch is only for hitch-mounted accessories only so you will not be able to attach safety cables. You will need The Stealth Hitches Hidden Trailer Hitch…

Sounds like you're trying to replace the shank on the original Kuat NV with a 2" shank from the newer NV? No, that will not be possible. There are so many design differences between the two bike racks that a retrofit like that will not work.…

Yes, the Stealth Hitches Hidden Rack Receiver #SH34VR is confirmed to fit your 2021 BMW 3 Series 330i xDrive AWD. According to Stealth hitch this will fit all 2019 - 2023 3 Series 330i models. I have included a link to an installation video below.

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

You are correct that when the Curt Trailer Hitch Receiver Class I #C11367 is installed, it will move the steel bumper closer to the bumper fascia by the width of the mounting bracket. However, this will not negatively impact or deform the bumper…

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…