Redarc Tow-Pro Elite Trailer Brake Controller Installation - 2019 Kia Sorento Video

Any time you are towing a trailer that has a fully loaded weigh that is over 50 percent of the vehicle's gross weight, a weight distribution system is recommended. If your vehicle weighs less than 6,000 lbs, a weight distribution system and…

As long as your vehicle is rated for use with a weight distribution system, we have just what you would need. The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready…

The Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional #RED44FR will need to be installed using the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat #ETBC7. This will give you the circuit…

The size difference between the Kenda Karrier ST175/80R13 Radial Trailer Tire - Load Range D #AM10210 and a 185-80R13 tire is the diameter and the width. We don't have any radials in that size, so I'll compare to the similar Kenda Loadstar…

You are spot on. You can use the 7-Way RV Upgrade Kit #ETBC7L to add a 7-way connector to your 2018 Kia Sorento to power the lights of your trailer and charge the on-board battery, but if your trailer has trailer brakes you will need to use the Curt…

Your 2019 Kia Sorento is rated for 2,000 lbs and 200 lb tongue weight if you have the 2.4L 4-cylinder engine and 1-1/4 inch trailer hitch receiver. If you have the 3.3L V6 then if you have the 3,500 lb towing capacity with 350 lb tongue weight if you…

The trailer tongue weight or hitch weight is dynamic meaning that it will change as weight is added or removed from the trailer or if the weight in the trailer is moved around (front to back). You can manipulate the tongue weight by moving weight…

It is very, very likely that the issue with no power to the 12 volt pin of the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector #C68JR is due to a fuse either having been blown or not inserted, so definitely…

We do have 4 different kits listed from 2 different manufacturers. The first is the Curt #C59236 which is a universal style harness that will give you a 4-way flat connector. This is needed if your 2022 Hyundai Santa Cruz does not have the factory…

All you need for attaching a brake controller to your 2022 Hyundai Palisade is the receiving-end setup. For that setup, you need to have a 4-way and a 7-way wiring harness in order to use a brake controller. If you do not have the 4-way installed…

It sounds like you would like to add a trailer brake controller to your 2022 Hyundai Santa Cruz to use along with the Curt Trailer Hitch Receiver #C23WR. The first thing you will want to add, in addition to the trailer hitch, is wiring. You are going…

Curt has a recommended setup procedure outlined for the Curt Echo part #C51180 that is outlined in their install instructions for this controller but since not all trailer brakes apply the same way there isn't a standard setting you can use that…