Malone DownLoader Kayak Carrier and TelosXL Load Assist with Tie-Downs Review - 2015 Toyota 4Runner Video

I took a look at your order and it was the Rhino-Rack Roof Rack for Factory Tracks - 54" Bars #Y02-480B-NT which is too short for the 63 inch spacing on your truck. For that spacing you will need the following: - Rhino-Rack Roof Rack for Factory…

Yes, the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" Long, part #Y02-480B-NT, will fit the tracks on your Leer topper. I have included a product description link below.

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

I recommend using aero style crossbars on a 2023 Jeer Wrangler. The Rhino-Rack Vortex Aero Crossbar System part #RRVA150B-2, part #RRVA-FK1-2, and part #RRRL110S5-2 in particular. The aero style bars are most versatile with rooftop accessories and…

The Thule Hullavator #TH898 requires a set of aftermarket crossbars that extend past the feet of the rack 4 to 8 inches. I tried to find a roof rack for your 2017 Inifiniti Q60 that would work or find info on the factory rack but could not find…

You found the correct Replacement Underbar Bracket #TH8535860. This bracket is made to fit Aero Bars, Factory Bars, Round Bars, Square Bars, Elliptical Bars and the Thule Hullavator #TH898 also comes with hardware to install in the track of most…

Thule recommend you have at least 4 to 8 inches of bar on the outside of the feet of the rack for the Hullavator part #TH898 to clear the side of the vehicle. Ideally when folded down you want at least 4 inches between the rack and the door of your…

Typically extending more than 4"-8" outside of your mounting towers will put the crossbars past the side view mirrors, which extends the width of the vehicle and could create unsafe conditions; this is the main reason that this is not…

I can give you some stipulations for the Thule Hullavator Pro #TH898 to fit the roof rack on your 2007 Toyota Highlander, but I wouldn't be able to verify a fit without knowing the following information about your current roof rack. You roof rack…

The best place to find the roof weight capacity for a 2022 Ford F-350 according to Ford is in your owner's manual. That said, I wasn't able to locate this information in there. Therefore, I recommend reaching out to the dealer. If you're…

If you're wanting a roof rack on your 2003 Ford F-250/350 there will be some drilling required on any roof rack system. The Rhino Rack #Y01-120B comes with tracks which will install on your roof. Again, drilling required. Then you can use a kayak…

To use the Thule Hullavator item #TH898 on your 2011 Toyota Venza you're going to need to install a set of crossbars that extend 4" - 8" past the roof racks legs. This allows the lift assist function of the Hullavator to work. Since…