K-Source Custom Towing Mirrors Installation - 2013 GMC Sierra Video

The Jensen RV Stereo #JWM60A that you referenced is a great option to replace your Jensen AWM910 as they feature very similar overall and mounting dimensions. With that being said there isn't a wiring harness/adapter available to make this switch…

The blue wire on the Jensen RV Stereo w DVD Player #JWM60A is only for an external amp so if you don't have an external amp then you don't need to worry about hooking up the blue wire.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Hi Rene; I'm sure it's frustrating to have the mirror fall off, and while there are only universal towing mirrors for your 2016 Nissan Frontier, there are better ones than the clamp-on (which I also do not like). I would definitely go with…

David, it sounds like you're looking for the K-Source Snap & Zap Custom Towing Mirrors #KS80900. As long as your Sierra does not have chrome caps or telescoping side mirrors, these'll work perfect for you. If you have any other questions…

Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that they're probably…

If you sever the blue wire leaving the P3 controller part #90195 leaving enough room to reconnect it and test the end of the wire leaving the controller with a circuit tester like part #PTW2993 you should see voltage when you slide the manual…

If one set of the HappiJac Extender Brackets part #HJ54FR doesn't provide enough clearance Happijac has told us that you can use a second set to gain additional clearance.

For your 2013 GMC Sierra 1500 no brake controller plug/port is present under the dash, but the needed wires are already run. You will connect the brake controller wiring with the vehicle wiring already present under the dash. If you check out the…