Hopkins Custom Tail Light Wiring Kit Installation - 2017 Ford F-150 Video

The Hopkins tow bar lighting kit part #HM56009 that you referenced does not carry a charge circuit. What you'd also need is the part #HM47890 to convert the 4-ways to 5-ways so you can use the extra pin for the charge circuit.

While it is not absolutely required to use the Roadmaster Battery Charge Line Kit for Towed Vehicles #RM-156-25 when flat towing your 2018 Ford F-150, if you plan on towing for extended periods of time, it is a good idea in order to keep your battery…

It sounds like you're wanting to tow your 2017 Ford F-150 and boat behind your motorhome. This is known as triple towing and while it is not illegal to do, it is illegal in most states, it can be dangerous, and it is important that you verify…

I have exactly what you are looking for in the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part #HM56009 which is a fit for a 2018 Ford F-150 (All Models) and completely plug and play. In fact, the Hopkins Custom Tail Light Wiring Kit for…

You will need to use a circuit tester, item #PTW2992 if needed, to test the pins in the 6-Way connector at the rear of your vehicle. Ground the alligator clip to the vehicle chassis and touch the test light to the center pin. If the light in the…

Yes, the Pollak Black Plastic 7-Pole RV Blade-Style Trailer Socket - Vehicle End, #PK12-707E, will work to replace the Pollak wiring socket that is broken. The insert will allow you to simply disconnect the wires and reconnect them inside the outer…

I am guessing by Roadmaster All Terrain tow bar you have one of the following: Roadmaster Sterling All Terrain item #RM-576 Roadmaster Nighthawk All Terrain item #RM-676 Roadmaster BlackHawk 2 All Terrain item #RM-422 If you have one of these tow…

In order to flat-tow a thirteenth generation (2015-2018) Ford F-150 with all four wheels on the ground behind a motorhome you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and…

In order to install the SMI Air Force One Supplemental Braking System part #SM99243 on a Spartan K3 Chassis with toad vehicle fitting all you will need is the SMI Second Vehicle Kit for Air Force One Supplemental Braking Systems part #SM99209 and the…

If the cable of your SMI Air Force One kit broke from the cylinder then the only solution is going to be to replace it with the part #DM56VR.

For your diesel pusher RV and 2013 GMC Sierra 2500 I highly recommend the SMI Air Force One Supplemental Braking System #SM99243. This particular system is designed specifically for RVs like yours that are equipped with air brakes as it will tap into…

Yes, you will still need to install the check valves with the Demco Air Force One Supplemental Braking System #SM99243 or #DM26VR, even if you use the Demco Vacuum Connection Tee Fitting #DM6257. It will still require you to install the check valves,…