Can Self Tapping Screw Be Used to Ground Trailer Wiring to Frame
Question:
Are these screws sufficient to use to ground trailer wiring to a trailer that has an aluminum frame?
asked by: Sean
0
Expert Reply:
Yes if you used a self-tapping screw like the part # FA1131822 you could use it to ground trailer wiring to a frame. Sometimes aluminum trailer frames aren't quite adequate so you may need to run a jumper wire to the main ground wire of the trailer wiring.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Self-Tapping Screw - 1/4" -14 x 3/4" Long - Zinc
- Accessories and Parts
- Trailer Wiring
- Wiring
- Ground Screw
- Flint Hill Goods
more information >
Continue Researching
- Q&A: What Screws To Use When Installing E-track To the Side Of Aluminum Trailer Frame
- Q&A: Is New Mounting Hardware Needed For The etrailer Scissor Stabilizer Jack # TSJC-24
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: Recommended Battery for a 12,000 Lb. Electric Car Trailer Winch
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Troubleshooting Electric Trailer Jack Not Working With Fully Charged Battery
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Recommended Solution for Tie Downs on Floor of Suretrac Aluminum Trailer
- Q&A: Recommended Plug In Wiring Harness for a Redarc Tow-Pro Brake Controller in a 2019 Toyota Tacoma
- Q&A: Is There a Replacement Lens for Winnebago 147680-02-01A (Glo-Brite 122Y) Amber Marker Light
- Article: Trailer Wiring Diagrams
- Article: How to Install an RV Awning From Scratch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)