Draw-Tite Trailer Hitch Installation - 2019 Dodge Durango Video

The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For…

My favorite trailer hitch for your 2019 Dodge Durango is the Draw Tite part #DT38MR because it installs behind the rear fascia cut out designed for a hitch so that when not in use you can cover it. See picture. I attached an install video for this…

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #DT38MRyou were looking at as it is confirmed to fit your 2021 Dodge Durango, and fits behind the rear bumper like you mentioned you were wanting. The…

I have a great solution for you to mount a hitch behind the bumper on your 2020 Dodge Durango; have a look at the Draw-Tite Class III Max Frame #DT38MR. This hitch mounts behind the bumper and is accessible via the removable panel on the rear bumper…

There is a slight difference between the etrailer Trailer Hitch Receiver #e98869 and Curt Trailer Hitch Receiver #13241 that fits your 2020 Nissan Frontier, which is the finish. The etrailer hitch has a rugged matte black finish which is really good…

For your 2020 Dodge Durango that does not have the factory tow package the hitch you would want is the Draw Tite #DT38MR as it has the best towing capacities and has a mostly hidden appearance and then for a 7-way you'd want the #TK22113 and…

If you are looking for the fuses on your 2015 Chevrolet Silverado 1500 that are tied to your trailer wiring then those will be in the fuse box in the engine compartment. You can find this information as well as a list of what all the fuses are tied…

The Curt 7-Way Trailer Adapter #C57003 is designed to be used on Volkswagens, Audis, and Porsches but we have seen some success on other vehicle makes. I can't say for sure but it might solve your issue. The adapter uses load resistors which…

The Curt T-Connector Vehicle Wiring Harness #C56336 that you referenced is designed for your 2018 Dodge Durango if it did not come with the factory tow package, but it can certainly still be installed and used on your Durango if it does have the…

The Draw-Tite Class III Max Frame Receiver Hitch part #DT38MR does require the removal of a 20" spare tire. The hitch is designed to fit with a stowed 18" tire but not 20" so it will not be able to remain stowed under the vehicle.…

Yes, there is plenty of room between the Draw-Tite Hitch #DT38MR and the spare tire on the 2019 Dodge Durango. The stock spare is an 18 inch wheel and you will have no problems. I've included a picture to show you and also included the install…

I spoke with my contact at Curt and he said if you have installed the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector #C55515, you will not need to do anything with the fuses to enable the trailer…