DeeZee Heavyweight Truck Bed Mat Installation - 2017 Chevrolet Silverado 3500 Video

Products Featured in this Video

How to Install the DeeZee Heavyweight Truck Bed Mat on a 2017 Chevrolet Silverado 3500

Today in our 2017 Chevrolet Silverado 3500 Crew Cab, we're going to be test-fitting the Dee Zee Custom Fit Truck Bed Mat, part number DZ86974. This Dee Zee truck bed mat is specifically designed to fit your truck. It's notched out and it contours the entire bed of your truck. This mat is designed to protect your truck bed and your load. It features raised channels to the length of your truck bed… see more >

Info for this part was:

Test Fit:

Joe V

Test Fit:

Hayden R

Test Fit:

Jared G

Video by:

Andrew K

Video by:

Dustin K

Video by:

Jonathan Y

Video Edited:

Joshua S

Video Edited:

Jacob T

Video Edited:

Kathleen M

Video Edited:

Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Explore Expert Info

Most Popular Wheel Bearings

How to Choose the Right Trailer Hitch Class

How to Mount a Truck Bed Camper

How to Measure for Trailer Hitch Drop

5 Things to Know About Weight Distribution Hitches

Difference Between Timbren Jounce Springs for 2019 Chevy Silverado 2500HD

The biggest difference between the two parts is that the Timbren Rear Suspension Enhancement System #TGMRCK25D is a double-convoluted spring while the Timbren Rear Suspension Enhancement System #TGMRTT35D are single-convoluted springs. The…

view full answer...

Comparing Air Bags and Timbrens for a 2015 Chevy Silverado 3500 Cab and Chassis

The biggest benefit air bags like the Air Lift LoadLifter 5000 Ultimate Air Helper Springs part #AL88339 have over jounce springs like the Timbren Rear Suspension Enhancement System part #TGMRTT35D for a 2015 Chevrolet Silverado 3500 Cab and Chassis…

view full answer...

Comparing Timbren TGMRCK25D Or TGMRTT35D Rear Axle Jounce Springs For 2019 Chevy Silverado 2500

I recommend the Timbren Rear Suspension Enhancement System part #TGMRCK25D which is designed for pick up trucks like the 2019 Chevy Silverado 2500 and has a 8,600 lb capacity. The Timbren Rear Suspension Enhancement System part #TGMRTT35D is designed…

view full answer...

To help suspend payload carried in the truck's bed, I'd recommend using #TGMRCK25D, which are rated up to 8600 lbs. Keep in mind, these will NOT increase the manufacturer's stated suspension capacity. For a slide-in camper or salt…

view full answer...

Comparing Timbren Rear Helper Springs for a 2019 Chevy Silverado 2500

The Timbren Springs part #TGMRTT35D for the 2019 Chevy Silverado 2500 have a 8,000 lb capacity are designed for service vehicles such as tow trucks. The Timbren Springs part #TGMRCK25D have a 8,600 lb capacity but as designed for heavy duty pickup…

view full answer...

Installation of Roadmaster XL Baseplates on 2013 Jeep Wrangler Unlimited Rubicon JK

The Roadmaster XL Base Plate Kit - Removable Arms #1444-1 does require that new bracket. The video you referenced was made prior to them adding that bracket, but they do require drilling that hole as the current instructions indicate under number 4.…

view full answer...

Lug Nut Torque Chart for Trailer Wheels

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

What is the Difference Between a Class II and a Class III Hitch?

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

7-Way Trailer Plug Adapter or Compatibility with Lance Slide-In Truck Bed Camper

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

We do - for your 2023 Ford F-350 you'll want the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect #TL89CR.

view full answer...