Tool Box Compatible Tonneau Cover for a 2022 Sierra 3500

Question

Question:

I have a 2022 GMC Sierra 3500 with an 8 foot bed. I would like a tonneau cover that fits with a truck box.

asked by: Mike K

0

Expert Reply:

I have a great tonneau cover for your 2022 Sierra 3500 that will accommodate your tool box and be long enough for an 8' bed. It is the Access Toolbox Edition Soft, Roll-Up Tonneau Cover item # A62439. This cover is designed to fit behind your toolbox. It features a tight seal between the toolbox and cover and it works with 19" - 21" wide tool boxes. The tonneau sits 1-1/2" above your GMC Sierra 3500's bed.

expert reply by: Jerred H

0

Answer 1

I spoke with Access. The Toolbox Edition Soft, Roll-Up Tonneau Cover, part #A62439, is designed to fit behind toolboxes that between 19" and 21". With yours being only a half-inch longer than that, they stated that it would be a tight fit,…

view full answer...

Answer 2

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 3

There are limited solutions for the tool box and rolling hard cover. I recommend the UWS Truck Bed Chest - Secure Lock Under Tonneau Series - 8.85 cu ft - Bright Aluminum #UWS08297 or the UWS Truck Bed Chest - Secure Lock Under Tonneau Series - 8.85…

view full answer...

Answer 4

The Demco Recon 5th Wheel Trailer Hitch - Single Jaw - 21,000lbs #DM8550045-5W is a standard 5th wheel hitch while the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter - Single Jaw - 21,000lbs Item #DM8550045 is a "Gooseneck" to 5th…

view full answer...

Answer 5

The Access Toolbox Edition Tonneau Cover part #A62439 does fit the 2022 GMC Sierra 3500HD long bed with the multi-pro tailgate and does not require any additional seals.

view full answer...

Answer 6

Out of the tonneau covers that we offer for your 2017 Ford F-350 the BAK Revolver X2 #BAK39331 is my favorite. It combines the sleek look of a soft roll up cover with the strength of a hard top. It is actually strong enough to hold up to 400 lbs of…

view full answer...

Answer 7

The difference between a load range E and load range F tire of the same size, 235/85-16, is the weight capacity and pressure. The Karrier Radial Tire, Load Range E, #AM10295, has a capacity of 3,640 pounds at 95 psi. The Load Range F Tire, #AM10501,…

view full answer...

Answer 8

As you can see in the picture I've included, when rolled up the cover sits lower than a normal tool box. These tend to sit about 3-5 inches above the rails of the truck. The access Tollbox Edition Tonneau #A62439 will be around 4-1/2 inches when…

view full answer...

Answer 9

I have a excellent toolbox and tonneau cover combo option for a 2021 Chevrolet Silverado 3500 with 8' bed, the Access Toolbox Edition Soft, Roll-Up Tonneau Cover part #A62439 with UWS Low Profile Truck Bed Toolbox part #UWS07730. This combo will…

view full answer...

Tool Box Compatible Tonneau Cover for a 2022 Sierra 3500

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching