Curt Ball and Safety Chain Loop Kit Installation - 2022 Ford F-250 Super Duty Video

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

There basically is no difference but we have two part numbers for the Curt Crosswing depending on where we have it listed on our website. As a fifth wheel hitch it's part #C92DR or as an adapter for a gooseneck hitch ball part #C32DR.

Safety chains are not required to be used with the Curt CrossWing Lightweight Gooseneck-to-5th-Wheel Trailer Hitch Adapter item #C32DR. The chain connectors will not be in the way the bed protector supports will mount over the sockets.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The factory rail kit is also known as the factory prep package on your 2017 Ford F-250. The difference is that the prep package includes the 4 holes plus the gooseneck hitch ball hole in the center. You can see an example of this in the attached…

The OEM location for the gooseneck ball hole in the bed of your 2020 Ford F-350 will be 45-1/2 inches forward from the rear edge of the truck bed. There would be a flat spot in the bed where the ball will install as well. I attached a picture that…

I can certainly help you out. The TW is the tongue weight. This is the weight of the trailer at the coupler that attaches to the ball mount on the trailer hitch. It should be 10 to 15 percent of the GTW or gross trailer weight. The gross trailer…

The Curt gooseneck hitch part #C60700 which is a confirmed fit for your 2017 Ford F-250 does come with instructions that detail where to drill for the ball hole. I checked the instructions and they state to use the factory dimple above the axle as…

I recommend the Karrier Load Range E tire #AM10303 Load Range E weight rating. Trailer tires will require a specific psi pressure in order to deliver their maximum weight carrying capacity. All of our E-rated tires in size 225/75-15 require 80-psi…

If you want a 16K 5th wheel hitch, the most popular option for your 2017 Ford F-250 factory pucks is the Curt A16 5th Wheel Trailer Hitch with Ford OEM Legs #C16520-16017. This is a very well made hitch designed for your pucks and will work well with…

If your 2017 Ford F-250 came with the factory 5th wheel and gooseneck prep package then there would be a total of 5 larger holes in the bed. Four of the holes forming a square around one in the center. That one in the center would be the gooseneck…

The correct B and W Turnoverball rail kit for your 2017 Ford F-350 without the factory rail kit is the part #BWGNRK1116. Since we don't know for sure if the hitch previously installed in your truck bed was a B and W all we can say is that the…