Blue Ox Base Plate Kit Installation - 2017 Jeep Grand Cherokee Video

It is possible to flat-tow your 2017 Jeep Grand Cherokee depending on it specifications. If it is a two-wheel drive version, it cannot be towed four-wheels down, and the same holds true if it is a four-wheel drive model with Quadra-Trac 1 (or no…

Yes, according to the owner's manual for the 2013 Honda CR-V you start the engine before shifting through the gears. I have attached the procedure below to follow carefully to avoid transmission damage. If you shift from reverse to neutral and…

It sounds like you are looking for a base plate kit that is a fit for a 2018 Jeep Cherokee Trailhawk and if that is the case we have plenty of options. I however recommend using the etrailer Invisible Base Plate Kit part #e98952 which features a nice…

The cut out dimensions listed for the JR Products Switch part #37213815 are right at 3/4 inches wide by 1-1/2 inches tall that we measured when we had one out.

Hopkins offers a flex cable, part #HM47053 that sounds exactly like what you need. On one end, it has the 7-way plug that's compatible with your RV, and a 6-way plug on the other that would plug into your towed vehicle. I'll link you to some…

To see a couple diagrams that show how the 6-way to 7-way adapter part #47435 is wired up check out the pictures I attached. The 6-way of this adapter has the center pin as the 12 volt circuit. That is the usual circuit that gets moved around on…

The etrailer SD Non-Binding Tow Bar part #e34ZR is what I recommend for a 2020 Jeep Grand Cherokee. It has plenty of capacity as well as all of the same features as the Excali-Bar part #DM9511013 but at a better price. The Dominator part #DM9511008…

If you have the etrailer Invisible Base Plate Kit - Removable Arms #e98950 and want to couple it with a Blue Ox Tow Bar you do NOT need an adapter. It is already set up to couple with a Blue Ox tow bar. Looking at The Adapter for Demco Kwik-Tow and…

The Mopar Recreational Flat Tow Wiring Kit part 68321424AB is required on select Jeep Cherokee's in order to activate the electronic power steering (EPS) system while the vehicle is in tow mode. This part must be obtained from the dealer but…

The vertical bolt on the Adapter for Roadmaster Sterling Tow Bar to etrailer Classic Base Plates #e98984 is 1/2” X 3”. I went ahead and attached a parts outline from the instructional manual to provide you with better perspective.

All of the equipment that you will need to properly flat tow/dinghy tow your 2015 Jeep Grand Cherokee will be base plates, a tow bar, tow bar wiring for working lights, safety cables, and most states now require a supplemental braking system be…

For a flat towing install harness that is custom fit for your 2017 Jeep Cherokee we have the Hopkins kit part #HM56208 which is a confirmed fit. This harness plugs in line with your taillight wiring connectors which makes the install very easy.